/* * linux/arch/arm/mm/proc-sa110.S * * Copyright (C) 1997-2002 Russell King * Copyright (C) 2003 Hyok S. Choi * modified for NON-PAGED MMU version. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * MMU functions for SA110 * * These are the low level assembler for performing cache and TLB * functions on the StrongARM-110. */ #include #include #include #include #include #include #include #include /* * the cache line size of the I and D cache */ #define DCACHELINESIZE 32 #define FLUSH_OFFSET 32768 .macro flush_110_dcache rd, ra, re ldr \rd, =flush_base ldr \ra, [\rd] eor \ra, \ra, #FLUSH_OFFSET str \ra, [\rd] add \re, \ra, #16384 @ only necessary for 16k 1001: ldr \rd, [\ra], #DCACHELINESIZE teq \re, \ra bne 1001b .endm .data flush_base: .long FLUSH_BASE .text /* * cpu_sa110_proc_init() */ ENTRY(cpu_sa110_proc_init) mov r0, #0 mcr p15, 0, r0, c15, c1, 2 @ Enable clock switching mov pc, lr /* * cpu_sa110_proc_fin() */ ENTRY(cpu_sa110_proc_fin) stmfd sp!, {lr} mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE msr cpsr_c, ip bl v4wb_flush_kern_cache_all @ clean caches 1: mov r0, #0 mcr p15, 0, r0, c15, c2, 2 @ Disable clock switching mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches ldmfd sp!, {pc} /* * cpu_sa110_reset(loc) * * Perform a soft reset of the system. Put the CPU into the * same state as it would be if it had been reset, and branch * to what would be the reset vector. * * loc: location to jump to for soft reset */ .align 5 ENTRY(cpu_sa110_reset) mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches mcr p15, 0, ip, c7, c10, 4 @ drain WB #ifdef CONFIG_MMU mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs #endif mrc p15, 0, ip, c1, c0, 0 @ ctrl register bic ip, ip, #0x000f @ ............wcam bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register mov pc, r0 /* * cpu_sa110_do_idle(type) * * Cause the processor to idle * * type: call type: * 0 = slow idle * 1 = fast idle * 2 = switch to slow processor clock * 3 = switch to fast processor clock */ .align 5 ENTRY(cpu_sa110_do_idle) mcr p15, 0, ip, c15, c2, 2 @ disable clock switching ldr r1, =UNCACHEABLE_ADDR @ load from uncacheable loc ldr r1, [r1, #0] @ force switch to MCLK mov r0, r0 @ safety mov r0, r0 @ safety mov r0, r0 @ safety mcr p15, 0, r0, c15, c8, 2 @ Wait for interrupt, cache aligned mov r0, r0 @ safety mov r0, r0 @ safety mov r0, r0 @ safety mcr p15, 0, r0, c15, c1, 2 @ enable clock switching mov pc, lr /* ================================= CACHE ================================ */ /* * cpu_sa110_dcache_clean_area(addr,sz) * * Clean the specified entry of any caches such that the MMU * translation fetches will obtain correct data. * * addr: cache-unaligned virtual address */ .align 5 ENTRY(cpu_sa110_dcache_clean_area) 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry add r0, r0, #DCACHELINESIZE subs r1, r1, #DCACHELINESIZE bhi 1b mov pc, lr /* =============================== PageTable ============================== */ /* * cpu_sa110_switch_mm(pgd) * * Set the translation base pointer to be as described by pgd. * * pgd: new page tables */ .align 5 ENTRY(cpu_sa110_switch_mm) #ifdef CONFIG_MMU flush_110_dcache r3, ip, r1 mov r1, #0 mcr p15, 0, r1, c7, c5, 0 @ invalidate I cache mcr p15, 0, r1, c7, c10, 4 @ drain WB mcr p15, 0, r0, c2, c0, 0 @ load page table pointer mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs #endif mov pc, lr #ifdef CONFIG_MMU /* * cpu_sa110_set_pte(ptep, pte) * * Set a PTE and flush it out */ .align 5 ENTRY(cpu_sa110_set_pte) str r1, [r0], #-2048 @ linux version eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY bic r2, r1, #PTE_SMALL_AP_MASK bic r2, r2, #PTE_TYPE_MASK orr r2, r2, #PTE_TYPE_SMALL tst r1, #L_PTE_USER @ User? orrne r2, r2, #PTE_SMALL_AP_URO_SRW tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty? orreq r2, r2, #PTE_SMALL_AP_UNO_SRW tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young? movne r2, #0 str r2, [r0] @ hardware version mov r0, r0 mcr p15, 0, r0, c7, c10, 1 @ clean D entry mcr p15, 0, r0, c7, c10, 4 @ drain WB mov pc, lr #endif __INIT .type __sa110_setup, #function __sa110_setup: mov r10, #0 mcr p15, 0, r10, c7, c7 @ invalidate I,D caches on v4 mcr p15, 0, r10, c7, c10, 4 @ drain write buffer on v4 #ifdef CONFIG_MMU mcr p15, 0, r10, c8, c7 @ invalidate I,D TLBs on v4 #endif mrc p15, 0, r0, c1, c0 @ get control register v4 ldr r5, sa110_cr1_clear bic r0, r0, r5 ldr r5, sa110_cr1_set orr r0, r0, r5 mov pc, lr .size __sa110_setup, . - __sa110_setup /* * R * .RVI ZFRS BLDP WCAM * ..01 0001 ..11 1101 * */ .type sa110_cr1_clear, #object .type sa110_cr1_set, #object sa110_cr1_clear: .word 0x3f3f sa110_cr1_set: #if defined(CONFIG_MMU) || defined(CONFIG_CPU_MXU_ENABLE) .word 0x113d #else .word 0x113c #endif __INITDATA /* * Purpose : Function pointers used to access above functions - all calls * come through these */ .type sa110_processor_functions, #object ENTRY(sa110_processor_functions) .word v4_early_abort .word cpu_sa110_proc_init .word cpu_sa110_proc_fin .word cpu_sa110_reset .word cpu_sa110_do_idle .word cpu_sa110_dcache_clean_area .word cpu_sa110_switch_mm #ifdef CONFIG_MMU .word cpu_sa110_set_pte #endif .size sa110_processor_functions, . - sa110_processor_functions .section ".rodata" .type cpu_arch_name, #object cpu_arch_name: .asciz "armv4" .size cpu_arch_name, . - cpu_arch_name .type cpu_elf_name, #object cpu_elf_name: .asciz "v4" .size cpu_elf_name, . - cpu_elf_name .type cpu_sa110_name, #object cpu_sa110_name: .asciz "StrongARM-110" .size cpu_sa110_name, . - cpu_sa110_name .align .section ".proc.info.init", #alloc, #execinstr .type __sa110_proc_info,#object __sa110_proc_info: .long 0x4401a100 .long 0xfffffff0 #if CONFIG_MMU .long PMD_TYPE_SECT | \ PMD_SECT_BUFFERABLE | \ PMD_SECT_CACHEABLE | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ #endif b __sa110_setup .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT | HWCAP_FAST_MULT .long cpu_sa110_name .long sa110_processor_functions #ifdef CONFIG_MMU .long v4wb_tlb_fns .long v4wb_user_fns #endif .long v4wb_cache_fns .size __sa110_proc_info, . - __sa110_proc_info