/* $Id$ * arch/sparc/kernel/entry.S: Sparc trap low-level entry points. * * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) * Copyright (C) 1996 Eddie C. Dost (ecd@skynet.be) * Copyright (C) 1996 Miguel de Icaza (miguel@nuclecu.unam.mx) * Copyright (C) 1996-1999 Jakub Jelinek (jj@sunsite.mff.cuni.cz) * Copyright (C) 1997 Anton Blanchard (anton@progsoc.uts.edu.au) */ #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef CONFIG_SUN4 #include #else #include #endif #include #include #include #include #include #include #include #define curptr g6 #define NR_SYSCALLS 284 /* Each OS is different... */ /* These are just handy. */ #define _SV save %sp, -STACKFRAME_SZ, %sp #define _RS restore #define FLUSH_ALL_KERNEL_WINDOWS \ _SV; _SV; _SV; _SV; _SV; _SV; _SV; \ _RS; _RS; _RS; _RS; _RS; _RS; _RS; /* First, KGDB low level things. This is a rewrite * of the routines found in the sparc-stub.c asm() statement * from the gdb distribution. This is also dual-purpose * as a software trap for userlevel programs. */ .data .align 4 in_trap_handler: .word 0 .text .align 4 #if 0 /* kgdb is dropped from 2.5.33 */ ! This function is called when any SPARC trap (except window overflow or ! underflow) occurs. It makes sure that the invalid register window is still ! available before jumping into C code. It will also restore the world if you ! return from handle_exception. .globl trap_low trap_low: rd %wim, %l3 SAVE_ALL sethi %hi(in_trap_handler), %l4 ld [%lo(in_trap_handler) + %l4], %l5 inc %l5 st %l5, [%lo(in_trap_handler) + %l4] /* Make sure kgdb sees the same state we just saved. */ LOAD_PT_GLOBALS(sp) LOAD_PT_INS(sp) ld [%sp + STACKFRAME_SZ + PT_Y], %l4 ld [%sp + STACKFRAME_SZ + PT_WIM], %l3 ld [%sp + STACKFRAME_SZ + PT_PSR], %l0 ld [%sp + STACKFRAME_SZ + PT_PC], %l1 ld [%sp + STACKFRAME_SZ + PT_NPC], %l2 rd %tbr, %l5 /* Never changes... */ /* Make kgdb exception frame. */ sub %sp,(16+1+6+1+72)*4,%sp ! Make room for input & locals ! + hidden arg + arg spill ! + doubleword alignment ! + registers[72] local var SAVE_KGDB_GLOBALS(sp) SAVE_KGDB_INS(sp) SAVE_KGDB_SREGS(sp, l4, l0, l3, l5, l1, l2) /* We are increasing PIL, so two writes. */ or %l0, PSR_PIL, %l0 wr %l0, 0, %psr WRITE_PAUSE wr %l0, PSR_ET, %psr WRITE_PAUSE call handle_exception add %sp, STACKFRAME_SZ, %o0 ! Pass address of registers /* Load new kgdb register set. */ LOAD_KGDB_GLOBALS(sp) LOAD_KGDB_INS(sp) LOAD_KGDB_SREGS(sp, l4, l0, l3, l5, l1, l2) wr %l4, 0x0, %y sethi %hi(in_trap_handler), %l4 ld [%lo(in_trap_handler) + %l4], %l5 dec %l5 st %l5, [%lo(in_trap_handler) + %l4] add %sp,(16+1+6+1+72)*4,%sp ! Undo the kgdb trap frame. /* Now take what kgdb did and place it into the pt_regs * frame which SparcLinux RESTORE_ALL understands., */ STORE_PT_INS(sp) STORE_PT_GLOBALS(sp) STORE_PT_YREG(sp, g2) STORE_PT_PRIV(sp, l0, l1, l2) RESTORE_ALL #endif #ifdef CONFIG_BLK_DEV_FD .text .align 4 .globl floppy_hardint floppy_hardint: /* * This code cannot touch registers %l0 %l1 and %l2 * because SAVE_ALL depends on their values. It depends * on %l3 also, but we regenerate it before a call. * Other registers are: * %l3 -- base address of fdc registers * %l4 -- pdma_vaddr * %l5 -- scratch for ld/st address * %l6 -- pdma_size * %l7 -- scratch [floppy byte, ld/st address, aux. data] */ /* Do we have work to do? */ sethi %hi(doing_pdma), %l7 ld [%l7 + %lo(doing_pdma)], %l7 cmp %l7, 0 be floppy_dosoftint nop /* Load fdc register base */ sethi %hi(fdc_status), %l3 ld [%l3 + %lo(fdc_status)], %l3 /* Setup register addresses */ sethi %hi(pdma_vaddr), %l5 ! transfer buffer ld [%l5 + %lo(pdma_vaddr)], %l4 sethi %hi(pdma_size), %l5 ! bytes to go ld [%l5 + %lo(pdma_size)], %l6 next_byte: ldub [%l3], %l7 andcc %l7, 0x80, %g0 ! Does fifo still have data bz floppy_fifo_emptied ! fifo has been emptied... andcc %l7, 0x20, %g0 ! in non-dma mode still? bz floppy_overrun ! nope, overrun andcc %l7, 0x40, %g0 ! 0=write 1=read bz floppy_write sub %l6, 0x1, %l6 /* Ok, actually read this byte */ ldub [%l3 + 1], %l7 orcc %g0, %l6, %g0 stb %l7, [%l4] bne next_byte add %l4, 0x1, %l4 b floppy_tdone nop floppy_write: /* Ok, actually write this byte */ ldub [%l4], %l7 orcc %g0, %l6, %g0 stb %l7, [%l3 + 1] bne next_byte add %l4, 0x1, %l4 /* fall through... */ floppy_tdone: sethi %hi(pdma_vaddr), %l5 st %l4, [%l5 + %lo(pdma_vaddr)] sethi %hi(pdma_size), %l5 st %l6, [%l5 + %lo(pdma_size)] /* Flip terminal count pin */ set auxio_register, %l7 ld [%l7], %l7 set sparc_cpu_model, %l5 ld [%l5], %l5 subcc %l5, 1, %g0 /* enum { sun4c = 1 }; */ be 1f ldub [%l7], %l5 or %l5, 0xc2, %l5 stb %l5, [%l7] andn %l5, 0x02, %l5 b 2f nop 1: or %l5, 0xf4, %l5 stb %l5, [%l7] andn %l5, 0x04, %l5 2: /* Kill some time so the bits set */ WRITE_PAUSE WRITE_PAUSE stb %l5, [%l7] /* Prevent recursion */ sethi %hi(doing_pdma), %l7 b floppy_dosoftint st %g0, [%l7 + %lo(doing_pdma)] /* We emptied the FIFO, but we haven't read everything * as of yet. Store the current transfer address and * bytes left to read so we can continue when the next * fast IRQ comes in. */ floppy_fifo_emptied: sethi %hi(pdma_vaddr), %l5 st %l4, [%l5 + %lo(pdma_vaddr)] sethi %hi(pdma_size), %l7 st %l6, [%l7 + %lo(pdma_size)] /* Restore condition codes */ wr %l0, 0x0, %psr WRITE_PAUSE jmp %l1 rett %l2 floppy_overrun: sethi %hi(pdma_vaddr), %l5 st %l4, [%l5 + %lo(pdma_vaddr)] sethi %hi(pdma_size), %l5 st %l6, [%l5 + %lo(pdma_size)] /* Prevent recursion */ sethi %hi(doing_pdma), %l7 st %g0, [%l7 + %lo(doing_pdma)] /* fall through... */ floppy_dosoftint: rd %wim, %l3 SAVE_ALL /* Set all IRQs off. */ or %l0, PSR_PIL, %l4 wr %l4, 0x0, %psr WRITE_PAUSE wr %l4, PSR_ET, %psr WRITE_PAUSE mov 11, %o0 ! floppy irq level (unused anyway) mov %g0, %o1 ! devid is not used in fast interrupts call sparc_floppy_irq add %sp, STACKFRAME_SZ, %o2 ! struct pt_regs *regs RESTORE_ALL #endif /* (CONFIG_BLK_DEV_FD) */ /* Bad trap handler */ .globl bad_trap_handler bad_trap_handler: SAVE_ALL wr %l0, PSR_ET, %psr WRITE_PAUSE add %sp, STACKFRAME_SZ, %o0 ! pt_regs call do_hw_interrupt mov %l7, %o1 ! trap number RESTORE_ALL /* For now all IRQ's not registered get sent here. handler_irq() will * see if a routine is registered to handle this interrupt and if not * it will say so on the console. */ .align 4 .globl real_irq_entry, patch_handler_irq real_irq_entry: SAVE_ALL #ifdef CONFIG_SMP .globl patchme_maybe_smp_msg cmp %l7, 12 patchme_maybe_smp_msg: bgu maybe_smp4m_msg nop #endif real_irq_continue: or %l0, PSR_PIL, %g2 wr %g2, 0x0, %psr WRITE_PAUSE wr %g2, PSR_ET, %psr WRITE_PAUSE mov %l7, %o0 ! irq level patch_handler_irq: call handler_irq add %sp, STACKFRAME_SZ, %o1 ! pt_regs ptr or %l0, PSR_PIL, %g2 ! restore PIL after handler_irq wr %g2, PSR_ET, %psr ! keep ET up WRITE_PAUSE RESTORE_ALL #ifdef CONFIG_SMP /* SMP per-cpu ticker interrupts are handled specially. */ smp4m_ticker: bne real_irq_continue+4 or %l0, PSR_PIL, %g2 wr %g2, 0x0, %psr WRITE_PAUSE wr %g2, PSR_ET, %psr WRITE_PAUSE call smp4m_percpu_timer_interrupt add %sp, STACKFRAME_SZ, %o0 wr %l0, PSR_ET, %psr WRITE_PAUSE RESTORE_ALL /* Here is where we check for possible SMP IPI passed to us * on some level other than 15 which is the NMI and only used * for cross calls. That has a separate entry point below. */ maybe_smp4m_msg: GET_PROCESSOR4M_ID(o3) set sun4m_interrupts, %l5 ld [%l5], %o5 sethi %hi(0x40000000), %o2 sll %o3, 12, %o3 ld [%o5 + %o3], %o1 andcc %o1, %o2, %g0 be,a smp4m_ticker cmp %l7, 14 st %o2, [%o5 + 0x4] WRITE_PAUSE ld [%o5], %g0 WRITE_PAUSE or %l0, PSR_PIL, %l4 wr %l4, 0x0, %psr WRITE_PAUSE wr %l4, PSR_ET, %psr WRITE_PAUSE call smp_reschedule_irq nop RESTORE_ALL .align 4 .globl linux_trap_ipi15_sun4m linux_trap_ipi15_sun4m: SAVE_ALL sethi %hi(0x80000000), %o2 GET_PROCESSOR4M_ID(o0) set sun4m_interrupts, %l5 ld [%l5], %o5 sll %o0, 12, %o0 add %o5, %o0, %o5 ld [%o5], %o3 andcc %o3, %o2, %g0 be 1f ! Must be an NMI async memory error st %o2, [%o5 + 4] WRITE_PAUSE ld [%o5], %g0 WRITE_PAUSE or %l0, PSR_PIL, %l4 wr %l4, 0x0, %psr WRITE_PAUSE wr %l4, PSR_ET, %psr WRITE_PAUSE call smp4m_cross_call_irq nop b ret_trap_lockless_ipi clr %l6 1: /* NMI async memory error handling. */ sethi %hi(0x80000000), %l4 sethi %hi(0x4000), %o3 sub %o5, %o0, %o5 add %o5, %o3, %l5 st %l4, [%l5 + 0xc] WRITE_PAUSE ld [%l5], %g0 WRITE_PAUSE or %l0, PSR_PIL, %l4 wr %l4, 0x0, %psr WRITE_PAUSE wr %l4, PSR_ET, %psr WRITE_PAUSE call sun4m_nmi nop st %l4, [%l5 + 0x8] WRITE_PAUSE ld [%l5], %g0 WRITE_PAUSE RESTORE_ALL .globl smp4d_ticker /* SMP per-cpu ticker interrupts are handled specially. */ smp4d_ticker: SAVE_ALL or %l0, PSR_PIL, %g2 sethi %hi(CC_ICLR), %o0 sethi %hi(1 << 14), %o1 or %o0, %lo(CC_ICLR), %o0 stha %o1, [%o0] ASI_M_MXCC /* Clear PIL 14 in MXCC's ICLR */ wr %g2, 0x0, %psr WRITE_PAUSE wr %g2, PSR_ET, %psr WRITE_PAUSE call smp4d_percpu_timer_interrupt add %sp, STACKFRAME_SZ, %o0 wr %l0, PSR_ET, %psr WRITE_PAUSE RESTORE_ALL .align 4 .globl linux_trap_ipi15_sun4d linux_trap_ipi15_sun4d: SAVE_ALL sethi %hi(CC_BASE), %o4 sethi %hi(MXCC_ERR_ME|MXCC_ERR_PEW|MXCC_ERR_ASE|MXCC_ERR_PEE), %o2 or %o4, (CC_EREG - CC_BASE), %o0 ldda [%o0] ASI_M_MXCC, %o0 andcc %o0, %o2, %g0 bne 1f sethi %hi(BB_STAT2), %o2 lduba [%o2] ASI_M_CTL, %o2 andcc %o2, BB_STAT2_MASK, %g0 bne 2f or %o4, (CC_ICLR - CC_BASE), %o0 sethi %hi(1 << 15), %o1 stha %o1, [%o0] ASI_M_MXCC /* Clear PIL 15 in MXCC's ICLR */ or %l0, PSR_PIL, %l4 wr %l4, 0x0, %psr WRITE_PAUSE wr %l4, PSR_ET, %psr WRITE_PAUSE call smp4d_cross_call_irq nop b ret_trap_lockless_ipi clr %l6 1: /* MXCC error */ 2: /* BB error */ /* Disable PIL 15 */ set CC_IMSK, %l4 lduha [%l4] ASI_M_MXCC, %l5 sethi %hi(1 << 15), %l7 or %l5, %l7, %l5 stha %l5, [%l4] ASI_M_MXCC /* FIXME */ 1: b,a 1b #endif /* CONFIG_SMP */ /* This routine handles illegal instructions and privileged * instruction attempts from user code. */ .align 4 .globl bad_instruction bad_instruction: sethi %hi(0xc1f80000), %l4 ld [%l1], %l5 sethi %hi(0x81d80000), %l7 and %l5, %l4, %l5 cmp %l5, %l7 be 1f SAVE_ALL wr %l0, PSR_ET, %psr ! re-enable traps WRITE_PAUSE add %sp, STACKFRAME_SZ, %o0 mov %l1, %o1 mov %l2, %o2 call do_illegal_instruction mov %l0, %o3 RESTORE_ALL 1: /* unimplemented flush - just skip */ jmpl %l2, %g0 rett %l2 + 4 .align 4 .globl priv_instruction priv_instruction: SAVE_ALL wr %l0, PSR_ET, %psr WRITE_PAUSE add %sp, STACKFRAME_SZ, %o0 mov %l1, %o1 mov %l2, %o2 call do_priv_instruction mov %l0, %o3 RESTORE_ALL /* This routine handles unaligned data accesses. */ .align 4 .globl mna_handler mna_handler: andcc %l0, PSR_PS, %g0 be mna_fromuser nop SAVE_ALL wr %l0, PSR_ET, %psr WRITE_PAUSE ld [%l1], %o1 call kernel_unaligned_trap add %sp, STACKFRAME_SZ, %o0 RESTORE_ALL mna_fromuser: SAVE_ALL wr %l0, PSR_ET, %psr ! re-enable traps WRITE_PAUSE ld [%l1], %o1 call user_unaligned_trap add %sp, STACKFRAME_SZ, %o0 RESTORE_ALL /* This routine handles floating point disabled traps. */ .align 4 .globl fpd_trap_handler fpd_trap_handler: SAVE_ALL wr %l0, PSR_ET, %psr ! re-enable traps WRITE_PAUSE add %sp, STACKFRAME_SZ, %o0 mov %l1, %o1 mov %l2, %o2 call do_fpd_trap mov %l0, %o3 RESTORE_ALL /* This routine handles Floating Point Exceptions. */ .align 4 .globl fpe_trap_handler fpe_trap_handler: set fpsave_magic, %l5 cmp %l1, %l5 be 1f sethi %hi(fpsave), %l5 or %l5, %lo(fpsave), %l5 cmp %l1, %l5 bne 2f sethi %hi(fpsave_catch2), %l5 or %l5, %lo(fpsave_catch2), %l5 wr %l0, 0x0, %psr WRITE_PAUSE jmp %l5 rett %l5 + 4 1: sethi %hi(fpsave_catch), %l5 or %l5, %lo(fpsave_catch), %l5 wr %l0, 0x0, %psr WRITE_PAUSE jmp %l5 rett %l5 + 4 2: SAVE_ALL wr %l0, PSR_ET, %psr ! re-enable traps WRITE_PAUSE add %sp, STACKFRAME_SZ, %o0 mov %l1, %o1 mov %l2, %o2 call do_fpe_trap mov %l0, %o3 RESTORE_ALL /* This routine handles Tag Overflow Exceptions. */ .align 4 .globl do_tag_overflow do_tag_overflow: SAVE_ALL wr %l0, PSR_ET, %psr ! re-enable traps WRITE_PAUSE add %sp, STACKFRAME_SZ, %o0 mov %l1, %o1 mov %l2, %o2 call handle_tag_overflow mov %l0, %o3 RESTORE_ALL /* This routine handles Watchpoint Exceptions. */ .align 4 .globl do_watchpoint do_watchpoint: SAVE_ALL wr %l0, PSR_ET, %psr ! re-enable traps WRITE_PAUSE add %sp, STACKFRAME_SZ, %o0 mov %l1, %o1 mov %l2, %o2 call handle_watchpoint mov %l0, %o3 RESTORE_ALL /* This routine handles Register Access Exceptions. */ .align 4 .globl do_reg_access do_reg_access: SAVE_ALL wr %l0, PSR_ET, %psr ! re-enable traps WRITE_PAUSE add %sp, STACKFRAME_SZ, %o0 mov %l1, %o1 mov %l2, %o2 call handle_reg_access mov %l0, %o3 RESTORE_ALL /* This routine handles Co-Processor Disabled Exceptions. */ .align 4 .globl do_cp_disabled do_cp_disabled: SAVE_ALL wr %l0, PSR_ET, %psr ! re-enable traps WRITE_PAUSE add %sp, STACKFRAME_SZ, %o0 mov %l1, %o1 mov %l2, %o2 call handle_cp_disabled mov %l0, %o3 RESTORE_ALL /* This routine handles Co-Processor Exceptions. */ .align 4 .globl do_cp_exception do_cp_exception: SAVE_ALL wr %l0, PSR_ET, %psr ! re-enable traps WRITE_PAUSE add %sp, STACKFRAME_SZ, %o0 mov %l1, %o1 mov %l2, %o2 call handle_cp_exception mov %l0, %o3 RESTORE_ALL /* This routine handles Hardware Divide By Zero Exceptions. */ .align 4 .globl do_hw_divzero do_hw_divzero: SAVE_ALL wr %l0, PSR_ET, %psr ! re-enable traps WRITE_PAUSE add %sp, STACKFRAME_SZ, %o0 mov %l1, %o1 mov %l2, %o2 call handle_hw_divzero mov %l0, %o3 RESTORE_ALL .align 4 .globl do_flush_windows do_flush_windows: SAVE_ALL wr %l0, PSR_ET, %psr WRITE_PAUSE andcc %l0, PSR_PS, %g0 bne dfw_kernel nop call flush_user_windows nop /* Advance over the trap instruction. */ ld [%sp + STACKFRAME_SZ + PT_NPC], %l1 add %l1, 0x4, %l2 st %l1, [%sp + STACKFRAME_SZ + PT_PC] st %l2, [%sp + STACKFRAME_SZ + PT_NPC] RESTORE_ALL .globl flush_patch_one /* We get these for debugging routines using __builtin_return_address() */ dfw_kernel: flush_patch_one: FLUSH_ALL_KERNEL_WINDOWS /* Advance over the trap instruction. */ ld [%sp + STACKFRAME_SZ + PT_NPC], %l1 add %l1, 0x4, %l2 st %l1, [%sp + STACKFRAME_SZ + PT_PC] st %l2, [%sp + STACKFRAME_SZ + PT_NPC] RESTORE_ALL /* The getcc software trap. The user wants the condition codes from * the %psr in register %g1. */ .align 4 .globl getcc_trap_handler getcc_trap_handler: srl %l0, 20, %g1 ! give user and %g1, 0xf, %g1 ! only ICC bits in %psr jmp %l2 ! advance over trap instruction rett %l2 + 0x4 ! like this... /* The setcc software trap. The user has condition codes in %g1 * that it would like placed in the %psr. Be careful not to flip * any unintentional bits! */ .align 4 .globl setcc_trap_handler setcc_trap_handler: sll %g1, 0x14, %l4 set PSR_ICC, %l5 andn %l0, %l5, %l0 ! clear ICC bits in %psr and %l4, %l5, %l4 ! clear non-ICC bits in user value or %l4, %l0, %l4 ! or them in... mix mix mix wr %l4, 0x0, %psr ! set new %psr WRITE_PAUSE ! TI scumbags... jmp %l2 ! advance over trap instruction rett %l2 + 0x4 ! like this... .align 4 .globl linux_trap_nmi_sun4c linux_trap_nmi_sun4c: SAVE_ALL /* Ugh, we need to clear the IRQ line. This is now * a very sun4c specific trap handler... */ sethi %hi(interrupt_enable), %l5 ld [%l5 + %lo(interrupt_enable)], %l5 ldub [%l5], %l6 andn %l6, INTS_ENAB, %l6 stb %l6, [%l5] /* Now it is safe to re-enable traps without recursion. */ or %l0, PSR_PIL, %l0 wr %l0, PSR_ET, %psr WRITE_PAUSE /* Now call the c-code with the pt_regs frame ptr and the * memory error registers as arguments. The ordering chosen * here is due to unlatching semantics. */ sethi %hi(AC_SYNC_ERR), %o0 add %o0, 0x4, %o0 lda [%o0] ASI_CONTROL, %o2 ! sync vaddr sub %o0, 0x4, %o0 lda [%o0] ASI_CONTROL, %o1 ! sync error add %o0, 0xc, %o0 lda [%o0] ASI_CONTROL, %o4 ! async vaddr sub %o0, 0x4, %o0 lda [%o0] ASI_CONTROL, %o3 ! async error call sparc_lvl15_nmi add %sp, STACKFRAME_SZ, %o0 RESTORE_ALL .align 4 .globl invalid_segment_patch1_ff .globl invalid_segment_patch2_ff invalid_segment_patch1_ff: cmp %l4, 0xff invalid_segment_patch2_ff: mov 0xff, %l3 .align 4 .globl invalid_segment_patch1_1ff .globl invalid_segment_patch2_1ff invalid_segment_patch1_1ff: cmp %l4, 0x1ff invalid_segment_patch2_1ff: mov 0x1ff, %l3 .align 4 .globl num_context_patch1_16, num_context_patch2_16 num_context_patch1_16: mov 0x10, %l7 num_context_patch2_16: mov 0x10, %l7 .align 4 .globl vac_linesize_patch_32 vac_linesize_patch_32: subcc %l7, 32, %l7 .align 4 .globl vac_hwflush_patch1_on, vac_hwflush_patch2_on /* * Ugly, but we cant use hardware flushing on the sun4 and we'd require * two instructions (Anton) */ #ifdef CONFIG_SUN4 vac_hwflush_patch1_on: nop #else vac_hwflush_patch1_on: addcc %l7, -PAGE_SIZE, %l7 #endif vac_hwflush_patch2_on: sta %g0, [%l3 + %l7] ASI_HWFLUSHSEG .globl invalid_segment_patch1, invalid_segment_patch2 .globl num_context_patch1 .globl vac_linesize_patch, vac_hwflush_patch1 .globl vac_hwflush_patch2 .align 4 .globl sun4c_fault ! %l0 = %psr ! %l1 = %pc ! %l2 = %npc ! %l3 = %wim ! %l7 = 1 for textfault ! We want error in %l5, vaddr in %l6 sun4c_fault: #ifdef CONFIG_SUN4 sethi %hi(sun4c_memerr_reg), %l4 ld [%l4+%lo(sun4c_memerr_reg)], %l4 ! memerr ctrl reg addr ld [%l4], %l6 ! memerr ctrl reg ld [%l4 + 4], %l5 ! memerr vaddr reg andcc %l6, 0x80, %g0 ! check for error type st %g0, [%l4 + 4] ! clear the error be 0f ! normal error sethi %hi(AC_BUS_ERROR), %l4 ! bus err reg addr call prom_halt ! something weird happened ! what exactly did happen? ! what should we do here? 0: or %l4, %lo(AC_BUS_ERROR), %l4 ! bus err reg addr lduba [%l4] ASI_CONTROL, %l6 ! bus err reg cmp %l7, 1 ! text fault? be 1f ! yes nop ld [%l1], %l4 ! load instruction that caused fault srl %l4, 21, %l4 andcc %l4, 1, %g0 ! store instruction? be 1f ! no sethi %hi(SUN4C_SYNC_BADWRITE), %l4 ! yep ! %lo(SUN4C_SYNC_BADWRITE) = 0 or %l4, %l6, %l6 ! set write bit to emulate sun4c 1: #else sethi %hi(AC_SYNC_ERR), %l4 add %l4, 0x4, %l6 ! AC_SYNC_VA in %l6 lda [%l6] ASI_CONTROL, %l5 ! Address lda [%l4] ASI_CONTROL, %l6 ! Error, retained for a bit #endif andn %l5, 0xfff, %l5 ! Encode all info into l7 srl %l6, 14, %l4 and %l4, 2, %l4 or %l5, %l4, %l4 or %l4, %l7, %l7 ! l7 = [addr,write,txtfault] andcc %l0, PSR_PS, %g0 be sun4c_fault_fromuser andcc %l7, 1, %g0 ! Text fault? be 1f sethi %hi(KERNBASE), %l4 mov %l1, %l5 ! PC 1: cmp %l5, %l4 blu sun4c_fault_fromuser sethi %hi(~((1 << SUN4C_REAL_PGDIR_SHIFT) - 1)), %l4 /* If the kernel references a bum kernel pointer, or a pte which * points to a non existant page in ram, we will run this code * _forever_ and lock up the machine!!!!! So we must check for * this condition, the AC_SYNC_ERR bits are what we must examine. * Also a parity error would make this happen as well. So we just * check that we are in fact servicing a tlb miss and not some * other type of fault for the kernel. */ andcc %l6, 0x80, %g0 be sun4c_fault_fromuser and %l5, %l4, %l5 /* Test for NULL pte_t * in vmalloc area. */ sethi %hi(VMALLOC_START), %l4 cmp %l5, %l4 blu,a invalid_segment_patch1 lduXa [%l5] ASI_SEGMAP, %l4 sethi %hi(swapper_pg_dir), %l4 srl %l5, SUN4C_PGDIR_SHIFT, %l6 or %l4, %lo(swapper_pg_dir), %l4 sll %l6, 2, %l6 ld [%l4 + %l6], %l4 #ifdef CONFIG_SUN4 sethi %hi(PAGE_MASK), %l6 andcc %l4, %l6, %g0 #else andcc %l4, PAGE_MASK, %g0 #endif be sun4c_fault_fromuser lduXa [%l5] ASI_SEGMAP, %l4 invalid_segment_patch1: cmp %l4, 0x7f bne 1f sethi %hi(sun4c_kfree_ring), %l4 or %l4, %lo(sun4c_kfree_ring), %l4 ld [%l4 + 0x18], %l3 deccc %l3 ! do we have a free entry? bcs,a 2f ! no, unmap one. sethi %hi(sun4c_kernel_ring), %l4 st %l3, [%l4 + 0x18] ! sun4c_kfree_ring.num_entries-- ld [%l4 + 0x00], %l6 ! entry = sun4c_kfree_ring.ringhd.next st %l5, [%l6 + 0x08] ! entry->vaddr = address ld [%l6 + 0x00], %l3 ! next = entry->next ld [%l6 + 0x04], %l7 ! entry->prev st %l7, [%l3 + 0x04] ! next->prev = entry->prev st %l3, [%l7 + 0x00] ! entry->prev->next = next sethi %hi(sun4c_kernel_ring), %l4 or %l4, %lo(sun4c_kernel_ring), %l4 ! head = &sun4c_kernel_ring.ringhd ld [%l4 + 0x00], %l7 ! head->next st %l4, [%l6 + 0x04] ! entry->prev = head st %l7, [%l6 + 0x00] ! entry->next = head->next st %l6, [%l7 + 0x04] ! head->next->prev = entry st %l6, [%l4 + 0x00] ! head->next = entry ld [%l4 + 0x18], %l3 inc %l3 ! sun4c_kernel_ring.num_entries++ st %l3, [%l4 + 0x18] b 4f ld [%l6 + 0x08], %l5 2: or %l4, %lo(sun4c_kernel_ring), %l4 ! head = &sun4c_kernel_ring.ringhd ld [%l4 + 0x04], %l6 ! entry = head->prev ld [%l6 + 0x08], %l3 ! tmp = entry->vaddr ! Flush segment from the cache. #ifdef CONFIG_SUN4 sethi %hi((128 * 1024)), %l7 #else sethi %hi((64 * 1024)), %l7 #endif 9: vac_hwflush_patch1: vac_linesize_patch: subcc %l7, 16, %l7 bne 9b vac_hwflush_patch2: sta %g0, [%l3 + %l7] ASI_FLUSHSEG st %l5, [%l6 + 0x08] ! entry->vaddr = address ld [%l6 + 0x00], %l5 ! next = entry->next ld [%l6 + 0x04], %l7 ! entry->prev st %l7, [%l5 + 0x04] ! next->prev = entry->prev st %l5, [%l7 + 0x00] ! entry->prev->next = next st %l4, [%l6 + 0x04] ! entry->prev = head ld [%l4 + 0x00], %l7 ! head->next st %l7, [%l6 + 0x00] ! entry->next = head->next st %l6, [%l7 + 0x04] ! head->next->prev = entry st %l6, [%l4 + 0x00] ! head->next = entry mov %l3, %l5 ! address = tmp 4: num_context_patch1: mov 0x08, %l7 ld [%l6 + 0x08], %l4 ldub [%l6 + 0x0c], %l3 or %l4, %l3, %l4 ! encode new vaddr/pseg into l4 sethi %hi(AC_CONTEXT), %l3 lduba [%l3] ASI_CONTROL, %l6 /* Invalidate old mapping, instantiate new mapping, * for each context. Registers l6/l7 are live across * this loop. */ 3: deccc %l7 sethi %hi(AC_CONTEXT), %l3 stba %l7, [%l3] ASI_CONTROL invalid_segment_patch2: mov 0x7f, %l3 stXa %l3, [%l5] ASI_SEGMAP andn %l4, 0x1ff, %l3 bne 3b stXa %l4, [%l3] ASI_SEGMAP sethi %hi(AC_CONTEXT), %l3 stba %l6, [%l3] ASI_CONTROL andn %l4, 0x1ff, %l5 1: sethi %hi(VMALLOC_START), %l4 cmp %l5, %l4 bgeu 1f mov 1 << (SUN4C_REAL_PGDIR_SHIFT - PAGE_SHIFT), %l7 sethi %hi(KERNBASE), %l6 sub %l5, %l6, %l4 srl %l4, PAGE_SHIFT, %l4 sethi %hi((SUN4C_PAGE_KERNEL & 0xf4000000)), %l3 or %l3, %l4, %l3 sethi %hi(PAGE_SIZE), %l4 2: sta %l3, [%l5] ASI_PTE deccc %l7 inc %l3 bne 2b add %l5, %l4, %l5 b 7f sethi %hi(sun4c_kernel_faults), %l4 1: srl %l5, SUN4C_PGDIR_SHIFT, %l3 sethi %hi(swapper_pg_dir), %l4 or %l4, %lo(swapper_pg_dir), %l4 sll %l3, 2, %l3 ld [%l4 + %l3], %l4 #ifndef CONFIG_SUN4 and %l4, PAGE_MASK, %l4 #else sethi %hi(PAGE_MASK), %l6 and %l4, %l6, %l4 #endif srl %l5, (PAGE_SHIFT - 2), %l6 and %l6, ((SUN4C_PTRS_PER_PTE - 1) << 2), %l6 add %l6, %l4, %l6 sethi %hi(PAGE_SIZE), %l4 2: ld [%l6], %l3 deccc %l7 sta %l3, [%l5] ASI_PTE add %l6, 0x4, %l6 bne 2b add %l5, %l4, %l5 sethi %hi(sun4c_kernel_faults), %l4 7: ld [%l4 + %lo(sun4c_kernel_faults)], %l3 inc %l3 st %l3, [%l4 + %lo(sun4c_kernel_faults)] /* Restore condition codes */ wr %l0, 0x0, %psr WRITE_PAUSE jmp %l1 rett %l2 sun4c_fault_fromuser: SAVE_ALL nop mov %l7, %o1 ! Decode the info from %l7 mov %l7, %o2 and %o1, 1, %o1 ! arg2 = text_faultp mov %l7, %o3 and %o2, 2, %o2 ! arg3 = writep andn %o3, 0xfff, %o3 ! arg4 = faulting address wr %l0, PSR_ET, %psr WRITE_PAUSE call do_sun4c_fault add %sp, STACKFRAME_SZ, %o0 ! arg1 = pt_regs ptr RESTORE_ALL .align 4 .globl srmmu_fault srmmu_fault: mov 0x400, %l5 mov 0x300, %l4 lda [%l5] ASI_M_MMUREGS, %l6 ! read sfar first lda [%l4] ASI_M_MMUREGS, %l5 ! read sfsr last andn %l6, 0xfff, %l6 srl %l5, 6, %l5 ! and encode all info into l7 and %l5, 2, %l5 or %l5, %l6, %l6 or %l6, %l7, %l7 ! l7 = [addr,write,txtfault] SAVE_ALL mov %l7, %o1 mov %l7, %o2 and %o1, 1, %o1 ! arg2 = text_faultp mov %l7, %o3 and %o2, 2, %o2 ! arg3 = writep andn %o3, 0xfff, %o3 ! arg4 = faulting address wr %l0, PSR_ET, %psr WRITE_PAUSE call do_sparc_fault add %sp, STACKFRAME_SZ, %o0 ! arg1 = pt_regs ptr RESTORE_ALL #ifdef CONFIG_SUNOS_EMUL /* SunOS uses syscall zero as the 'indirect syscall' it looks * like indir_syscall(scall_num, arg0, arg1, arg2...); etc. * This is complete brain damage. */ .globl sunos_indir sunos_indir: mov %o7, %l4 cmp %o0, NR_SYSCALLS blu,a 1f sll %o0, 0x2, %o0 sethi %hi(sunos_nosys), %l6 b 2f or %l6, %lo(sunos_nosys), %l6 1: set sunos_sys_table, %l7 ld [%l7 + %o0], %l6 2: mov %o1, %o0 mov %o2, %o1 mov %o3, %o2 mov %o4, %o3 mov %o5, %o4 call %l6 mov %l4, %o7 #endif .align 4 .globl sys_nis_syscall sys_nis_syscall: mov %o7, %l5 add %sp, STACKFRAME_SZ, %o0 ! pt_regs *regs arg call c_sys_nis_syscall mov %l5, %o7 .align 4 .globl sys_ptrace sys_ptrace: call do_ptrace add %sp, STACKFRAME_SZ, %o0 ld [%curptr + TI_FLAGS], %l5 andcc %l5, _TIF_SYSCALL_TRACE, %g0 be 1f nop call syscall_trace nop 1: RESTORE_ALL .align 4 .globl sys_execve sys_execve: mov %o7, %l5 add %sp, STACKFRAME_SZ, %o0 ! pt_regs *regs arg call sparc_execve mov %l5, %o7 .align 4 .globl sys_pipe sys_pipe: mov %o7, %l5 add %sp, STACKFRAME_SZ, %o0 ! pt_regs *regs arg call sparc_pipe mov %l5, %o7 .align 4 .globl sys_sigaltstack sys_sigaltstack: mov %o7, %l5 mov %fp, %o2 call do_sigaltstack mov %l5, %o7 .align 4 .globl sys_sigstack sys_sigstack: mov %o7, %l5 mov %fp, %o2 call do_sys_sigstack mov %l5, %o7 .align 4 .globl sys_sigpause sys_sigpause: /* Note: %o0 already has correct value... */ call do_sigpause add %sp, STACKFRAME_SZ, %o1 ld [%curptr + TI_FLAGS], %l5 andcc %l5, _TIF_SYSCALL_TRACE, %g0 be 1f nop call syscall_trace nop 1: /* We are returning to a signal handler. */ RESTORE_ALL .align 4 .globl sys_sigsuspend sys_sigsuspend: call do_sigsuspend add %sp, STACKFRAME_SZ, %o0 ld [%curptr + TI_FLAGS], %l5 andcc %l5, _TIF_SYSCALL_TRACE, %g0 be 1f nop call syscall_trace nop 1: /* We are returning to a signal handler. */ RESTORE_ALL .align 4 .globl sys_rt_sigsuspend sys_rt_sigsuspend: /* Note: %o0, %o1 already have correct value... */ call do_rt_sigsuspend add %sp, STACKFRAME_SZ, %o2 ld [%curptr + TI_FLAGS], %l5 andcc %l5, _TIF_SYSCALL_TRACE, %g0 be 1f nop call syscall_trace nop 1: /* We are returning to a signal handler. */ RESTORE_ALL .align 4 .globl sys_sigreturn sys_sigreturn: call do_sigreturn add %sp, STACKFRAME_SZ, %o0 ld [%curptr + TI_FLAGS], %l5 andcc %l5, _TIF_SYSCALL_TRACE, %g0 be 1f nop call syscall_trace nop 1: /* We don't want to muck with user registers like a * normal syscall, just return. */ RESTORE_ALL .align 4 .globl sys_rt_sigreturn sys_rt_sigreturn: call do_rt_sigreturn add %sp, STACKFRAME_SZ, %o0 ld [%curptr + TI_FLAGS], %l5 andcc %l5, _TIF_SYSCALL_TRACE, %g0 be 1f nop call syscall_trace nop 1: /* We are returning to a signal handler. */ RESTORE_ALL /* Now that we have a real sys_clone, sys_fork() is * implemented in terms of it. Our _real_ implementation * of SunOS vfork() will use sys_vfork(). * * XXX These three should be consolidated into mostly shared * XXX code just like on sparc64... -DaveM */ .align 4 .globl sys_fork, flush_patch_two sys_fork: mov %o7, %l5 flush_patch_two: FLUSH_ALL_KERNEL_WINDOWS; ld [%curptr + TI_TASK], %o4 rd %psr, %g4 WRITE_PAUSE mov SIGCHLD, %o0 ! arg0: clone flags rd %wim, %g5 WRITE_PAUSE mov %fp, %o1 ! arg1: usp std %g4, [%o4 + AOFF_task_thread + AOFF_thread_fork_kpsr] add %sp, STACKFRAME_SZ, %o2 ! arg2: pt_regs ptr mov 0, %o3 call sparc_do_fork mov %l5, %o7 /* Whee, kernel threads! */ .globl sys_clone, flush_patch_three sys_clone: mov %o7, %l5 flush_patch_three: FLUSH_ALL_KERNEL_WINDOWS; ld [%curptr + TI_TASK], %o4 rd %psr, %g4 WRITE_PAUSE /* arg0,1: flags,usp -- loaded already */ cmp %o1, 0x0 ! Is new_usp NULL? rd %wim, %g5 WRITE_PAUSE be,a 1f mov %fp, %o1 ! yes, use callers usp andn %o1, 7, %o1 ! no, align to 8 bytes 1: std %g4, [%o4 + AOFF_task_thread + AOFF_thread_fork_kpsr] add %sp, STACKFRAME_SZ, %o2 ! arg2: pt_regs ptr mov 0, %o3 call sparc_do_fork mov %l5, %o7 /* Whee, real vfork! */ .globl sys_vfork, flush_patch_four sys_vfork: flush_patch_four: FLUSH_ALL_KERNEL_WINDOWS; ld [%curptr + TI_TASK], %o4 rd %psr, %g4 WRITE_PAUSE rd %wim, %g5 WRITE_PAUSE std %g4, [%o4 + AOFF_task_thread + AOFF_thread_fork_kpsr] sethi %hi(0x4000 | 0x0100 | SIGCHLD), %o0 mov %fp, %o1 or %o0, %lo(0x4000 | 0x0100 | SIGCHLD), %o0 sethi %hi(sparc_do_fork), %l1 mov 0, %o3 jmpl %l1 + %lo(sparc_do_fork), %g0 add %sp, STACKFRAME_SZ, %o2 .align 4 linux_sparc_ni_syscall: sethi %hi(sys_ni_syscall), %l7 b syscall_is_too_hard or %l7, %lo(sys_ni_syscall), %l7 linux_fast_syscall: andn %l7, 3, %l7 mov %i0, %o0 mov %i1, %o1 mov %i2, %o2 jmpl %l7 + %g0, %g0 mov %i3, %o3 linux_syscall_trace: call syscall_trace nop mov %i0, %o0 mov %i1, %o1 mov %i2, %o2 mov %i3, %o3 b 2f mov %i4, %o4 .globl ret_from_fork ret_from_fork: call schedule_tail mov %g3, %o0 b ret_sys_call ld [%sp + STACKFRAME_SZ + PT_I0], %o0 /* Linux native and SunOS system calls enter here... */ .align 4 .globl linux_sparc_syscall linux_sparc_syscall: /* Direct access to user regs, must faster. */ cmp %g1, NR_SYSCALLS bgeu linux_sparc_ni_syscall sll %g1, 2, %l4 ld [%l7 + %l4], %l7 andcc %l7, 1, %g0 bne linux_fast_syscall /* Just do first insn from SAVE_ALL in the delay slot */ .globl syscall_is_too_hard syscall_is_too_hard: SAVE_ALL_HEAD rd %wim, %l3 wr %l0, PSR_ET, %psr mov %i0, %o0 mov %i1, %o1 mov %i2, %o2 ld [%curptr + TI_FLAGS], %l5 mov %i3, %o3 andcc %l5, _TIF_SYSCALL_TRACE, %g0 mov %i4, %o4 bne linux_syscall_trace mov %i0, %l5 2: call %l7 mov %i5, %o5 st %o0, [%sp + STACKFRAME_SZ + PT_I0] .globl ret_sys_call ret_sys_call: ld [%curptr + TI_FLAGS], %l6 cmp %o0, -ERESTART_RESTARTBLOCK ld [%sp + STACKFRAME_SZ + PT_PSR], %g3 set PSR_C, %g2 bgeu 1f andcc %l6, _TIF_SYSCALL_TRACE, %g0 /* System call success, clear Carry condition code. */ andn %g3, %g2, %g3 clr %l6 st %g3, [%sp + STACKFRAME_SZ + PT_PSR] bne linux_syscall_trace2 ld [%sp + STACKFRAME_SZ + PT_NPC], %l1 /* pc = npc */ add %l1, 0x4, %l2 /* npc = npc+4 */ st %l1, [%sp + STACKFRAME_SZ + PT_PC] b ret_trap_entry st %l2, [%sp + STACKFRAME_SZ + PT_NPC] 1: /* System call failure, set Carry condition code. * Also, get abs(errno) to return to the process. */ sub %g0, %o0, %o0 or %g3, %g2, %g3 st %o0, [%sp + STACKFRAME_SZ + PT_I0] mov 1, %l6 st %g3, [%sp + STACKFRAME_SZ + PT_PSR] bne linux_syscall_trace2 ld [%sp + STACKFRAME_SZ + PT_NPC], %l1 /* pc = npc */ add %l1, 0x4, %l2 /* npc = npc+4 */ st %l1, [%sp + STACKFRAME_SZ + PT_PC] b ret_trap_entry st %l2, [%sp + STACKFRAME_SZ + PT_NPC] linux_syscall_trace2: call syscall_trace add %l1, 0x4, %l2 /* npc = npc+4 */ st %l1, [%sp + STACKFRAME_SZ + PT_PC] b ret_trap_entry st %l2, [%sp + STACKFRAME_SZ + PT_NPC] /* * Solaris system calls and indirect system calls enter here. * * I have named the solaris indirect syscalls like that because * it seems like Solaris has some fast path syscalls that can * be handled as indirect system calls. - mig */ linux_syscall_for_solaris: sethi %hi(sys_call_table), %l7 b linux_sparc_syscall or %l7, %lo(sys_call_table), %l7 .align 4 .globl solaris_syscall solaris_syscall: cmp %g1,59 be linux_syscall_for_solaris cmp %g1,2 be linux_syscall_for_solaris cmp %g1,42 be linux_syscall_for_solaris cmp %g1,119 be,a linux_syscall_for_solaris mov 2, %g1 1: SAVE_ALL_HEAD rd %wim, %l3 wr %l0, PSR_ET, %psr nop nop mov %i0, %l5 call do_solaris_syscall add %sp, STACKFRAME_SZ, %o0 st %o0, [%sp + STACKFRAME_SZ + PT_I0] set PSR_C, %g2 cmp %o0, -ERESTART_RESTARTBLOCK bgeu 1f ld [%sp + STACKFRAME_SZ + PT_PSR], %g3 /* System call success, clear Carry condition code. */ andn %g3, %g2, %g3 clr %l6 b 2f st %g3, [%sp + STACKFRAME_SZ + PT_PSR] 1: /* System call failure, set Carry condition code. * Also, get abs(errno) to return to the process. */ sub %g0, %o0, %o0 mov 1, %l6 st %o0, [%sp + STACKFRAME_SZ + PT_I0] or %g3, %g2, %g3 st %g3, [%sp + STACKFRAME_SZ + PT_PSR] /* Advance the pc and npc over the trap instruction. * If the npc is unaligned (has a 1 in the lower byte), it means * the kernel does not want us to play magic (ie, skipping over * traps). Mainly when the Solaris code wants to set some PC and * nPC (setcontext). */ 2: ld [%sp + STACKFRAME_SZ + PT_NPC], %l1 /* pc = npc */ andcc %l1, 1, %g0 bne 1f add %l1, 0x4, %l2 /* npc = npc+4 */ st %l1, [%sp + STACKFRAME_SZ + PT_PC] b ret_trap_entry st %l2, [%sp + STACKFRAME_SZ + PT_NPC] /* kernel knows what it is doing, fixup npc and continue */ 1: sub %l1, 1, %l1 b ret_trap_entry st %l1, [%sp + STACKFRAME_SZ + PT_NPC] #ifndef CONFIG_SUNOS_EMUL .align 4 .globl sunos_syscall sunos_syscall: SAVE_ALL_HEAD rd %wim, %l3 wr %l0, PSR_ET, %psr nop nop mov %i0, %l5 call do_sunos_syscall add %sp, STACKFRAME_SZ, %o0 #endif /* {net, open}bsd system calls enter here... */ .align 4 .globl bsd_syscall bsd_syscall: /* Direct access to user regs, must faster. */ cmp %g1, NR_SYSCALLS blu,a 1f sll %g1, 2, %l4 set sys_ni_syscall, %l7 b bsd_is_too_hard nop 1: ld [%l7 + %l4], %l7 .globl bsd_is_too_hard bsd_is_too_hard: rd %wim, %l3 SAVE_ALL wr %l0, PSR_ET, %psr WRITE_PAUSE 2: mov %i0, %o0 mov %i1, %o1 mov %i2, %o2 mov %i0, %l5 mov %i3, %o3 mov %i4, %o4 call %l7 mov %i5, %o5 st %o0, [%sp + STACKFRAME_SZ + PT_I0] set PSR_C, %g2 cmp %o0, -ERESTART_RESTARTBLOCK bgeu 1f ld [%sp + STACKFRAME_SZ + PT_PSR], %g3 /* System call success, clear Carry condition code. */ andn %g3, %g2, %g3 clr %l6 b 2f st %g3, [%sp + STACKFRAME_SZ + PT_PSR] 1: /* System call failure, set Carry condition code. * Also, get abs(errno) to return to the process. */ sub %g0, %o0, %o0 #if 0 /* XXX todo XXX */ sethi %hi(bsd_xlatb_rorl), %o3 or %o3, %lo(bsd_xlatb_rorl), %o3 sll %o0, 2, %o0 ld [%o3 + %o0], %o0 #endif mov 1, %l6 st %o0, [%sp + STACKFRAME_SZ + PT_I0] or %g3, %g2, %g3 st %g3, [%sp + STACKFRAME_SZ + PT_PSR] /* Advance the pc and npc over the trap instruction. */ 2: ld [%sp + STACKFRAME_SZ + PT_NPC], %l1 /* pc = npc */ add %l1, 0x4, %l2 /* npc = npc+4 */ st %l1, [%sp + STACKFRAME_SZ + PT_PC] b ret_trap_entry st %l2, [%sp + STACKFRAME_SZ + PT_NPC] /* Saving and restoring the FPU state is best done from lowlevel code. * * void fpsave(unsigned long *fpregs, unsigned long *fsr, * void *fpqueue, unsigned long *fpqdepth) */ .globl fpsave fpsave: st %fsr, [%o1] ! this can trap on us if fpu is in bogon state ld [%o1], %g1 set 0x2000, %g4 andcc %g1, %g4, %g0 be 2f mov 0, %g2 /* We have an fpqueue to save. */ 1: std %fq, [%o2] fpsave_magic: st %fsr, [%o1] ld [%o1], %g3 andcc %g3, %g4, %g0 add %g2, 1, %g2 bne 1b add %o2, 8, %o2 2: st %g2, [%o3] std %f0, [%o0 + 0x00] std %f2, [%o0 + 0x08] std %f4, [%o0 + 0x10] std %f6, [%o0 + 0x18] std %f8, [%o0 + 0x20] std %f10, [%o0 + 0x28] std %f12, [%o0 + 0x30] std %f14, [%o0 + 0x38] std %f16, [%o0 + 0x40] std %f18, [%o0 + 0x48] std %f20, [%o0 + 0x50] std %f22, [%o0 + 0x58] std %f24, [%o0 + 0x60] std %f26, [%o0 + 0x68] std %f28, [%o0 + 0x70] retl std %f30, [%o0 + 0x78] /* Thanks for Theo Deraadt and the authors of the Sprite/netbsd/openbsd * code for pointing out this possible deadlock, while we save state * above we could trap on the fsr store so our low level fpu trap * code has to know how to deal with this. */ fpsave_catch: b fpsave_magic + 4 st %fsr, [%o1] fpsave_catch2: b fpsave + 4 st %fsr, [%o1] /* void fpload(unsigned long *fpregs, unsigned long *fsr); */ .globl fpload fpload: ldd [%o0 + 0x00], %f0 ldd [%o0 + 0x08], %f2 ldd [%o0 + 0x10], %f4 ldd [%o0 + 0x18], %f6 ldd [%o0 + 0x20], %f8 ldd [%o0 + 0x28], %f10 ldd [%o0 + 0x30], %f12 ldd [%o0 + 0x38], %f14 ldd [%o0 + 0x40], %f16 ldd [%o0 + 0x48], %f18 ldd [%o0 + 0x50], %f20 ldd [%o0 + 0x58], %f22 ldd [%o0 + 0x60], %f24 ldd [%o0 + 0x68], %f26 ldd [%o0 + 0x70], %f28 ldd [%o0 + 0x78], %f30 ld [%o1], %fsr retl nop /* __ndelay and __udelay take two arguments: * 0 - nsecs or usecs to delay * 1 - per_cpu udelay_val (loops per jiffy) * * Note that ndelay gives HZ times higher resolution but has a 10ms * limit. udelay can handle up to 1s. */ .globl __ndelay __ndelay: save %sp, -STACKFRAME_SZ, %sp mov %i0, %o0 call .umul mov 0x1ad, %o1 ! 2**32 / (1 000 000 000 / HZ) call .umul mov %i1, %o1 ! udelay_val ba delay_continue mov %o1, %o0 ! >>32 later for better resolution .globl __udelay __udelay: save %sp, -STACKFRAME_SZ, %sp mov %i0, %o0 sethi %hi(0x10c6), %o1 call .umul or %o1, %lo(0x10c6), %o1 ! 2**32 / 1 000 000 call .umul mov %i1, %o1 ! udelay_val call .umul mov HZ, %o0 ! >>32 earlier for wider range delay_continue: cmp %o0, 0x0 1: bne 1b subcc %o0, 1, %o0 ret restore /* Handle a software breakpoint */ /* We have to inform parent that child has stopped */ .align 4 .globl breakpoint_trap breakpoint_trap: rd %wim,%l3 SAVE_ALL wr %l0, PSR_ET, %psr WRITE_PAUSE st %i0, [%sp + STACKFRAME_SZ + PT_G0] ! for restarting syscalls call sparc_breakpoint add %sp, STACKFRAME_SZ, %o0 RESTORE_ALL .align 4 .globl __handle_exception, flush_patch_exception __handle_exception: flush_patch_exception: FLUSH_ALL_KERNEL_WINDOWS; ldd [%o0], %o6 jmpl %o7 + 0xc, %g0 ! see asm-sparc/processor.h mov 1, %g1 ! signal EFAULT condition .align 4 .globl kill_user_windows, kuw_patch1_7win .globl kuw_patch1 kuw_patch1_7win: sll %o3, 6, %o3 /* No matter how much overhead this routine has in the worst * case scenerio, it is several times better than taking the * traps with the old method of just doing flush_user_windows(). */ kill_user_windows: ld [%g6 + TI_UWINMASK], %o0 ! get current umask orcc %g0, %o0, %g0 ! if no bits set, we are done be 3f ! nothing to do rd %psr, %o5 ! must clear interrupts or %o5, PSR_PIL, %o4 ! or else that could change wr %o4, 0x0, %psr ! the uwinmask state WRITE_PAUSE ! burn them cycles 1: ld [%g6 + TI_UWINMASK], %o0 ! get consistent state orcc %g0, %o0, %g0 ! did an interrupt come in? be 4f ! yep, we are done rd %wim, %o3 ! get current wim srl %o3, 1, %o4 ! simulate a save kuw_patch1: sll %o3, 7, %o3 ! compute next wim or %o4, %o3, %o3 ! result andncc %o0, %o3, %o0 ! clean this bit in umask bne kuw_patch1 ! not done yet srl %o3, 1, %o4 ! begin another save simulation wr %o3, 0x0, %wim ! set the new wim st %g0, [%g6 + TI_UWINMASK] ! clear uwinmask 4: wr %o5, 0x0, %psr ! re-enable interrupts WRITE_PAUSE ! burn baby burn 3: retl ! return st %g0, [%g6 + TI_W_SAVED] ! no windows saved .align 4 .globl restore_current restore_current: LOAD_CURRENT(g6, o0) retl nop #ifdef CONFIG_PCI #include .align 4 .globl linux_trap_ipi15_pcic linux_trap_ipi15_pcic: rd %wim, %l3 SAVE_ALL /* * First deactivate NMI * or we cannot drop ET, cannot get window spill traps. * The busy loop is necessary because the PIO error * sometimes does not go away quickly and we trap again. */ sethi %hi(pcic_regs), %o1 ld [%o1 + %lo(pcic_regs)], %o2 ! Get pending status for printouts later. ld [%o2 + PCI_SYS_INT_PENDING], %o0 mov PCI_SYS_INT_PENDING_CLEAR_ALL, %o1 stb %o1, [%o2 + PCI_SYS_INT_PENDING_CLEAR] 1: ld [%o2 + PCI_SYS_INT_PENDING], %o1 andcc %o1, ((PCI_SYS_INT_PENDING_PIO|PCI_SYS_INT_PENDING_PCI)>>24), %g0 bne 1b nop or %l0, PSR_PIL, %l4 wr %l4, 0x0, %psr WRITE_PAUSE wr %l4, PSR_ET, %psr WRITE_PAUSE call pcic_nmi add %sp, STACKFRAME_SZ, %o1 ! struct pt_regs *regs RESTORE_ALL .globl pcic_nmi_trap_patch pcic_nmi_trap_patch: sethi %hi(linux_trap_ipi15_pcic), %l3 jmpl %l3 + %lo(linux_trap_ipi15_pcic), %g0 rd %psr, %l0 .word 0 #endif /* CONFIG_PCI */ /* End of entry.S */