#!/bin/sh
#
# skeleton      Example file to build /etc/init.d scripts.
#
# Version:      @(#) /etc/init.d/skeleton 1.01 26-Oct-1993
#
# Author:       Miquel van Smoorenburg, <miquels@drinkel.nl.mugnet.org>
#

# Source function library.

LOCAL_NUMBER="2" # My MSN / EAZ
REMOTE_NUMBER="06313166xxx"
LOCAL_IP="194.77.xxx.a"
REMOTE_IP="194.77.xxx.bb"
DEVICE="isdn0"

VERSION=`cat /proc/version | awk '{ print $3 }' `
SYSPATH="/sbin/"

# Source function library.
. /etc/rc.d/init.d/functions

# Source networking configuration.
. /etc/sysconfig/network

# Check that networking is up.
[ ${NETWORKING} = "no" ] && exit 0

# [ -f /sbin/diald ] || exit 0
[ -f /sbin/ipppd ] || exit 0


# See how we were called.
case "$1" in
  start)
        # load VJ-compression module
        # $SYSPATH\/insmod /lib/modules/$VERSION\/net/slhc.o
        #
        # /sbin/modprobe ppp
        #
        # $SYSPATH\/insmod /lib/modules/$VERSION\/misc/isdn.o
        $SYSPATH\/modprobe /lib/modules/$VERSION\/misc/teles.o io=0xd8000,12,0xd80,1 teles_id=Teles1
	sleep 2
        $SYSPATH\/rmmod teles
	sleep 2
        $SYSPATH\/modprobe /lib/modules/$VERSION\/misc/teles.o io=0xd8000,12,0xd80,1 teles_id=Teles1
        # $SYSPATH\/modprobe /lib/modules/$VERSION\/misc/teles.o io=0xd8000,12,0xd80,1 id=Teles1
        telesctrl Teles1 1 4             # Get some messages on /dev/isdnctrl
        $SYSPATH\/isdnctrl addif  $DEVICE            # Create new interface 'DEVICE'
        $SYSPATH\/isdnctrl verbose 1
        $SYSPATH\/isdnctrl addphone $DEVICE in $REMOTE_NUMBER  # Set incoming phone-number
        ##
	## Phone Number gets inserted by diald
	##
	## $SYSPATH\/isdnctrl addphone $DEVICE out $REMOTE_NUMBER   # Set outgoung phone-number
        $SYSPATH\/isdnctrl eaz $DEVICE $LOCAL_NUMBER             # Set local EAZ ..
        $SYSPATH\/isdnctrl l2_prot $DEVICE hdlc      # for sync PPP: set Level 2 to HDLC
        $SYSPATH\/isdnctrl l3_prot $DEVICE trans     # not really necessary, 'trans' is defau

        $SYSPATH\/isdnctrl encap $DEVICE rawip
        $SYSPATH\/isdnctrl huptimeout $DEVICE 600   # Hangup-Timeout is 600 sec.
        $SYSPATH\/isdnctrl chargehup $DEVICE off     # Hangup before next Charge-Info
        $SYSPATH\/isdnctrl ihup $DEVICE off          # Hangup incoming call
        $SYSPATH\/isdnctrl secure $DEVICE on         # Accept only configured phone-number

        $SYSPATH\/ifconfig $DEVICE $LOCAL_IP pointopoint $REMOTE_IP metric 1 -arp

	/sbin/telesctrl Teles1 1 4             # Get some messages on /dev/isdnctrl

	# /sbin/route add default $DEVICE

	$SYSPATH\/isdnlog -Dv -m1015 -l1015 -x1015 -C8 /dev/isdnctrl0 
	
 	sleep 10
	daemon /sbin/diald device /dev/$DEVICE mode dev &
	sleep 10

        touch /var/lock/subsys/isdn
        ;;
  stop)

	route del default 
        killproc diald

	sleep 1

	ifconfig $DEVICE down
	isdnctrl delif $DEVICE

	sleep 1

        killproc isdnlog
	rmmod teles
	rmmod isdn
        rm -f /var/lock/subsys/isdn
        ;;
  *)
        echo "Usage: isdn {start|stop}"
        exit 1
esac

exit 0