#! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated automatically using autoconf version 2.13 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. # Defaults: ac_help= ac_default_prefix=/usr/local # Any additions from configure.in: ac_help="$ac_help --enable-gccpipe use \"gcc -pipe\" for compilation, where possible" ac_default_prefix="/usr/local" ac_help="$ac_help --enable-shared[=PKGS] build shared libraries [default=yes]" ac_help="$ac_help --enable-static[=PKGS] build static libraries [default=yes]" ac_help="$ac_help --enable-fast-install[=PKGS] optimize for fast installation [default=yes]" ac_help="$ac_help --with-gnu-ld assume the C compiler uses GNU ld [default=no]" # Find the correct PATH separator. Usually this is `:', but # DJGPP uses `;' like DOS. if test "X${PATH_SEPARATOR+set}" != Xset; then UNAME=${UNAME-`uname 2>/dev/null`} case X$UNAME in *-DOS) lt_cv_sys_path_separator=';' ;; *) lt_cv_sys_path_separator=':' ;; esac PATH_SEPARATOR=$lt_cv_sys_path_separator fi # Check that we are running under the correct shell. SHELL=${CONFIG_SHELL-/bin/sh} case X$ECHO in X*--fallback-echo) # Remove one level of quotation (which was required for Make). ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','` ;; esac echo=${ECHO-echo} if test "X$1" = X--no-reexec; then # Discard the --no-reexec flag, and continue. shift elif test "X$1" = X--fallback-echo; then # Avoid inline document here, it may be left over : elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then # Yippee, $echo works! : else # Restart under the correct shell. exec $SHELL "$0" --no-reexec ${1+"$@"} fi if test "X$1" = X--fallback-echo; then # used as fallback echo shift cat </dev/null && echo_test_string="`eval $cmd`" && (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null then break fi done fi if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then : else # The Solaris, AIX, and Digital Unix default echo programs unquote # backslashes. This makes it impossible to quote backslashes using # echo "$something" | sed 's/\\/\\\\/g' # # So, first we look for a working echo in the user's PATH. IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR for dir in $PATH /usr/ucb; do if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then echo="$dir/echo" break fi done IFS="$save_ifs" if test "X$echo" = Xecho; then # We didn't find a better echo, so look for alternatives. if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then # This shell has a builtin print -r that does the trick. echo='print -r' elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && test "X$CONFIG_SHELL" != X/bin/ksh; then # If we have ksh, try running configure again with it. ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} export ORIGINAL_CONFIG_SHELL CONFIG_SHELL=/bin/ksh export CONFIG_SHELL exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} else # Try using printf. echo='printf %s\n' if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then # Cool, printf works : elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && test "X$echo_testing_string" = 'X\t' && echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL export CONFIG_SHELL SHELL="$CONFIG_SHELL" export SHELL echo="$CONFIG_SHELL $0 --fallback-echo" elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && test "X$echo_testing_string" = 'X\t' && echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then echo="$CONFIG_SHELL $0 --fallback-echo" else # maybe with a smaller string... prev=: for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null then break fi prev="$cmd" done if test "$prev" != 'sed 50q "$0"'; then echo_test_string=`eval $prev` export echo_test_string exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} else # Oops. We lost completely, so just stick with echo. echo=echo fi fi fi fi fi fi # Copy echo and quote the copy suitably for passing to libtool from # the Makefile, instead of quoting the original, which is used later. ECHO=$echo if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" fi ac_help="$ac_help --disable-libtool-lock avoid locking (might break parallel builds)" ac_help="$ac_help --with-pic try to use only PIC/non-PIC objects [default=use both]" # Initialize some variables set by options. # The variables have the same names as the options, with # dashes changed to underlines. build=NONE cache_file=./config.cache exec_prefix=NONE host=NONE no_create= nonopt=NONE no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= sitefile= srcdir= target=NONE verbose= x_includes=NONE x_libraries=NONE bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datadir='${prefix}/share' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' libdir='${exec_prefix}/lib' includedir='${prefix}/include' oldincludedir='/usr/include' infodir='${prefix}/info' mandir='${prefix}/man' # Initialize some other variables. subdirs= MFLAGS= MAKEFLAGS= SHELL=${CONFIG_SHELL-/bin/sh} # Maximum number of lines to put in a shell here document. ac_max_here_lines=12 ac_prev= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval "$ac_prev=\$ac_option" ac_prev= continue fi case "$ac_option" in -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; *) ac_optarg= ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. case "$ac_option" in -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir="$ac_optarg" ;; -build | --build | --buil | --bui | --bu) ac_prev=build ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build="$ac_optarg" ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file="$ac_optarg" ;; -datadir | --datadir | --datadi | --datad | --data | --dat | --da) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ | --da=*) datadir="$ac_optarg" ;; -disable-* | --disable-*) ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } fi ac_feature=`echo $ac_feature| sed 's/-/_/g'` eval "enable_${ac_feature}=no" ;; -enable-* | --enable-*) ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } fi ac_feature=`echo $ac_feature| sed 's/-/_/g'` case "$ac_option" in *=*) ;; *) ac_optarg=yes ;; esac eval "enable_${ac_feature}='$ac_optarg'" ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix="$ac_optarg" ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he) # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat << EOF Usage: configure [options] [host] Options: [defaults in brackets after descriptions] Configuration: --cache-file=FILE cache test results in FILE --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages --site-file=FILE use FILE as the site file --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [same as prefix] --bindir=DIR user executables in DIR [EPREFIX/bin] --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] --libexecdir=DIR program executables in DIR [EPREFIX/libexec] --datadir=DIR read-only architecture-independent data in DIR [PREFIX/share] --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data in DIR [PREFIX/com] --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] --libdir=DIR object code libraries in DIR [EPREFIX/lib] --includedir=DIR C header files in DIR [PREFIX/include] --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] --infodir=DIR info documentation in DIR [PREFIX/info] --mandir=DIR man documentation in DIR [PREFIX/man] --srcdir=DIR find the sources in DIR [configure dir or ..] --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names EOF cat << EOF Host type: --build=BUILD configure for building on BUILD [BUILD=HOST] --host=HOST configure for HOST [guessed] --target=TARGET configure for TARGET [TARGET=HOST] Features and packages: --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --x-includes=DIR X include files are in DIR --x-libraries=DIR X library files are in DIR EOF if test -n "$ac_help"; then echo "--enable and --with options recognized:$ac_help" fi exit 0 ;; -host | --host | --hos | --ho) ac_prev=host ;; -host=* | --host=* | --hos=* | --ho=*) host="$ac_optarg" ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir="$ac_optarg" ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir="$ac_optarg" ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir="$ac_optarg" ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir="$ac_optarg" ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst \ | --locals | --local | --loca | --loc | --lo) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* \ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) localstatedir="$ac_optarg" ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir="$ac_optarg" ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir="$ac_optarg" ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix="$ac_optarg" ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix="$ac_optarg" ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix="$ac_optarg" ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name="$ac_optarg" ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir="$ac_optarg" ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir="$ac_optarg" ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site="$ac_optarg" ;; -site-file | --site-file | --site-fil | --site-fi | --site-f) ac_prev=sitefile ;; -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*) sitefile="$ac_optarg" ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir="$ac_optarg" ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir="$ac_optarg" ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target="$ac_optarg" ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers) echo "configure generated by autoconf version 2.13" exit 0 ;; -with-* | --with-*) ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } fi ac_package=`echo $ac_package| sed 's/-/_/g'` case "$ac_option" in *=*) ;; *) ac_optarg=yes ;; esac eval "with_${ac_package}='$ac_optarg'" ;; -without-* | --without-*) ac_package=`echo $ac_option|sed -e 's/-*without-//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } fi ac_package=`echo $ac_package| sed 's/-/_/g'` eval "with_${ac_package}=no" ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes="$ac_optarg" ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries="$ac_optarg" ;; -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } ;; *) if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then echo "configure: warning: $ac_option: invalid host type" 1>&2 fi if test "x$nonopt" != xNONE; then { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } fi nonopt="$ac_option" ;; esac done if test -n "$ac_prev"; then { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } fi trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 # File descriptor usage: # 0 standard input # 1 file creation # 2 errors and warnings # 3 some systems may open it to /dev/tty # 4 used on the Kubota Titan # 6 checking for... messages and results # 5 compiler messages saved in config.log if test "$silent" = yes; then exec 6>/dev/null else exec 6>&1 fi exec 5>./config.log echo "\ This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. " 1>&5 # Strip out --no-create and --no-recursion so they do not pile up. # Also quote any args containing shell metacharacters. ac_configure_args= for ac_arg do case "$ac_arg" in -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c) ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) ac_configure_args="$ac_configure_args '$ac_arg'" ;; *) ac_configure_args="$ac_configure_args $ac_arg" ;; esac done # NLS nuisances. # Only set these to C if already set. These must not be set unconditionally # because not all systems understand e.g. LANG=C (notably SCO). # Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! # Non-C LC_CTYPE values break the ctype check. if test "${LANG+set}" = set; then LANG=C; export LANG; fi if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -rf conftest* confdefs.h # AIX cpp loses on an empty file, so make sure it contains at least a newline. echo > confdefs.h # A filename unique to this package, relative to the directory that # configure is in, which we can look for to find out if srcdir is correct. ac_unique_file=.root-dir # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then its parent. ac_prog=$0 ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. srcdir=$ac_confdir if test ! -r $srcdir/$ac_unique_file; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r $srcdir/$ac_unique_file; then if test "$ac_srcdir_defaulted" = yes; then { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } else { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } fi fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. if test -z "$sitefile"; then if test -z "$CONFIG_SITE"; then if test "x$prefix" != xNONE; then CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" else CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" fi fi else CONFIG_SITE="$sitefile" fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then echo "loading site script $ac_site_file" . "$ac_site_file" fi done if test -r "$cache_file"; then echo "loading cache $cache_file" . $cache_file else echo "creating cache $cache_file" > $cache_file fi ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross ac_exeext= ac_objext=o if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then ac_n= ac_c=' ' ac_t=' ' else ac_n=-n ac_c= ac_t= fi else ac_n= ac_c='\c' ac_t= fi # From configure.in Revision: 1.63 PWDD=`pwd` save_IFS="${IFS}" IFS=. read NESSUS_MAJOR NESSUS_MINOR NESSUS_PATCH /dev/null || { echo "configure: error: *** Panic: Corrupt version file" 1>&2; exit 1; } version=$NESSUS_MAJOR.$NESSUS_MINOR.$NESSUS_PATCH GCC_NO_PIPE=no # Check whether --enable-gccpipe or --disable-gccpipe was given. if test "${enable_gccpipe+set}" = set; then enableval="$enable_gccpipe" case $enable_gccpipe in n*|N*) GCC_NO_PIPE=yes ;; y*|Y*) unset GCC_NO_PIPE ;; esac fi test x$GCC_NO_PIPE = xno && unset GCC_NO_PIPE test "x$prefix" != "xNONE" || prefix=/usr/local PATH=$DESTDIR${prefix}/bin:$PATH; export PATH ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:763: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="gcc" break fi done IFS="$ac_save_ifs" fi fi CC="$ac_cv_prog_CC" if test -n "$CC"; then echo "$ac_t""$CC" 1>&6 else echo "$ac_t""no" 1>&6 fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:793: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_prog_rejected=no ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" break fi done IFS="$ac_save_ifs" if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# -gt 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift set dummy "$ac_dir/$ac_word" "$@" shift ac_cv_prog_CC="$@" fi fi fi fi CC="$ac_cv_prog_CC" if test -n "$CC"; then echo "$ac_t""$CC" 1>&6 else echo "$ac_t""no" 1>&6 fi if test -z "$CC"; then case "`uname -s`" in *win32* | *WIN32*) # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:844: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="cl" break fi done IFS="$ac_save_ifs" fi fi CC="$ac_cv_prog_CC" if test -n "$CC"; then echo "$ac_t""$CC" 1>&6 else echo "$ac_t""no" 1>&6 fi ;; esac fi test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 echo "configure:876: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF #line 887 "configure" #include "confdefs.h" main(){return(0);} EOF if { (eval echo configure:892: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then ac_cv_prog_cc_cross=no else ac_cv_prog_cc_cross=yes fi else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_cv_prog_cc_works=no fi rm -fr conftest* ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 echo "configure:918: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 echo "configure:923: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no fi fi echo "$ac_t""$ac_cv_prog_gcc" 1>&6 if test $ac_cv_prog_gcc = yes; then GCC=yes else GCC= fi ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 echo "configure:951: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else echo 'void f(){}' > conftest.c if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then ac_cv_prog_cc_g=yes else ac_cv_prog_cc_g=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 if test "$ac_test_CFLAGS" = set; then CFLAGS="$ac_save_CFLAGS" elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi ac_aux_dir= for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do if test -f $ac_dir/install-sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break elif test -f $ac_dir/install.sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break fi done if test -z "$ac_aux_dir"; then { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; } fi ac_config_guess=$ac_aux_dir/config.guess ac_config_sub=$ac_aux_dir/config.sub ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. # Find the correct PATH separator. Usually this is `:', but # DJGPP uses `;' like DOS. if test "X${PATH_SEPARATOR+set}" != Xset; then UNAME=${UNAME-`uname 2>/dev/null`} case X$UNAME in *-DOS) lt_cv_sys_path_separator=';' ;; *) lt_cv_sys_path_separator=':' ;; esac PATH_SEPARATOR=$lt_cv_sys_path_separator fi echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 echo "configure:1014: checking for Cygwin environment" >&5 if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_cygwin=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_cygwin=no fi rm -f conftest* rm -f conftest* fi echo "$ac_t""$ac_cv_cygwin" 1>&6 CYGWIN= test "$ac_cv_cygwin" = yes && CYGWIN=yes echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 echo "configure:1047: checking for mingw32 environment" >&5 if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_mingw32=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_mingw32=no fi rm -f conftest* rm -f conftest* fi echo "$ac_t""$ac_cv_mingw32" 1>&6 MINGW32= test "$ac_cv_mingw32" = yes && MINGW32=yes echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 echo "configure:1076: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else # This must be in double quotes, not single quotes, because CPP may get # substituted into the Makefile and "${CC-cc}" will confuse make. CPP="${CC-cc} -E" # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:1097: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:1114: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:1131: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* CPP=/lib/cpp fi rm -f conftest* fi rm -f conftest* fi rm -f conftest* ac_cv_prog_CPP="$CPP" fi CPP="$ac_cv_prog_CPP" else ac_cv_prog_CPP="$CPP" fi echo "$ac_t""$CPP" 1>&6 # Check whether --enable-shared or --disable-shared was given. if test "${enable_shared+set}" = set; then enableval="$enable_shared" p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," for pkg in $enableval; do if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS="$ac_save_ifs" ;; esac else enable_shared=yes fi # Check whether --enable-static or --disable-static was given. if test "${enable_static+set}" = set; then enableval="$enable_static" p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," for pkg in $enableval; do if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS="$ac_save_ifs" ;; esac else enable_static=yes fi # Check whether --enable-fast-install or --disable-fast-install was given. if test "${enable_fast_install+set}" = set; then enableval="$enable_fast_install" p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," for pkg in $enableval; do if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS="$ac_save_ifs" ;; esac else enable_fast_install=yes fi # Make sure we can run config.sub. if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then : else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 echo "configure:1231: checking host system type" >&5 host_alias=$host case "$host_alias" in NONE) case $nonopt in NONE) if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then : else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } fi ;; *) host_alias=$nonopt ;; esac ;; esac host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias` host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 echo "configure:1252: checking build system type" >&5 build_alias=$build case "$build_alias" in NONE) case $nonopt in NONE) build_alias=$host_alias ;; *) build_alias=$nonopt ;; esac ;; esac build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias` build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$build" 1>&6 # Check whether --with-gnu-ld or --without-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then withval="$with_gnu_ld" test "$withval" = no || with_gnu_ld=yes else with_gnu_ld=no fi ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6 echo "configure:1281: checking for ld used by GCC" >&5 case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [\\/]* | [A-Za-z]:[\\/]*) re_direlt='/[^/][^/]*/\.\./' # Canonicalize the path of ld ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then echo $ac_n "checking for GNU ld""... $ac_c" 1>&6 echo "configure:1311: checking for GNU ld" >&5 else echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6 echo "configure:1314: checking for non-GNU ld" >&5 fi if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -z "$LD"; then IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some GNU ld's only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then test "$with_gnu_ld" != no && break else test "$with_gnu_ld" != yes && break fi fi done IFS="$ac_save_ifs" else lt_cv_path_LD="$LD" # Let the user override the test with a path. fi fi LD="$lt_cv_path_LD" if test -n "$LD"; then echo "$ac_t""$LD" 1>&6 else echo "$ac_t""no" 1>&6 fi test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; } echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6 echo "configure:1349: checking if the linker ($LD) is GNU ld" >&5 if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else # I'd rather use --version here, but apparently some GNU ld's only accept -v. if $LD -v 2>&1 &5; then lt_cv_prog_gnu_ld=yes else lt_cv_prog_gnu_ld=no fi fi echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6 with_gnu_ld=$lt_cv_prog_gnu_ld echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6 echo "configure:1366: checking for $LD option to reload object files" >&5 if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else lt_cv_ld_reload_flag='-r' fi echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6 reload_flag=$lt_cv_ld_reload_flag test -n "$reload_flag" && reload_flag=" $reload_flag" echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6 echo "configure:1378: checking for BSD-compatible nm" >&5 if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM="$NM" else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do test -z "$ac_dir" && ac_dir=. tmp_nm=$ac_dir/${ac_tool_prefix}nm if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then lt_cv_path_NM="$tmp_nm -B" break elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then lt_cv_path_NM="$tmp_nm -p" break else lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags fi fi done IFS="$ac_save_ifs" test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm fi fi NM="$lt_cv_path_NM" echo "$ac_t""$NM" 1>&6 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6 echo "configure:1416: checking whether ln -s works" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else rm -f conftestdata if ln -s X conftestdata 2>/dev/null then rm -f conftestdata ac_cv_prog_LN_S="ln -s" else ac_cv_prog_LN_S=ln fi fi LN_S="$ac_cv_prog_LN_S" if test "$ac_cv_prog_LN_S" = "ln -s"; then echo "$ac_t""yes" 1>&6 else echo "$ac_t""no" 1>&6 fi echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6 echo "configure:1437: checking how to recognise dependant libraries" >&5 if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file= lt_cv_deplibs_check_method='unknown' # Need to set the preceding variable on all platforms that support # interlibrary dependencies. # 'none' -- dependencies not supported. # `unknown' -- same as none, but documents that we really don't know. # 'pass_all' -- all dependencies passed with no checks. # 'test_compile' -- check by making test program. # 'file_magic [[regex]]' -- check by looking for files in library path # which responds to the $file_magic_cmd with a given egrep regex. # If you have `file' or equivalent on your system and you're not sure # whether `pass_all' will *always* work, you probably want this one. case $host_os in aix4* | aix5*) lt_cv_deplibs_check_method=pass_all ;; beos*) lt_cv_deplibs_check_method=pass_all ;; bsdi4*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' lt_cv_file_magic_cmd='/usr/bin/file -L' lt_cv_file_magic_test_file=/shlib/libc.so ;; cygwin* | mingw* | pw32*) lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' lt_cv_file_magic_cmd='$OBJDUMP -f' ;; darwin* | rhapsody*) lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' lt_cv_file_magic_cmd='/usr/bin/file -L' case "$host_os" in rhapsody* | darwin1.[012]) lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1` ;; *) # Darwin 1.3 on lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' ;; esac ;; freebsd*) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; gnu*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20*|hpux11*) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; irix5* | irix6*) case $host_os in irix5*) # this will be overridden with pass_all, but let us keep it just in case lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" ;; *) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac # this will be overridden with pass_all, but let us keep it just in case lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1" ;; esac lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` lt_cv_deplibs_check_method=pass_all ;; # This must be Linux ELF. linux-gnu*) case $host_cpu in alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* ) lt_cv_deplibs_check_method=pass_all ;; *) # glibc up to 2.1.1 does not perform some relocations on ARM lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; esac lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` ;; netbsd*) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$' else lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$' fi ;; newos6*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; openbsd*) lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object' else lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' fi ;; osf3* | osf4* | osf5*) # this will be overridden with pass_all, but let us keep it just in case lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' lt_cv_file_magic_test_file=/shlib/libc.so lt_cv_deplibs_check_method=pass_all ;; sco3.2v5*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all lt_cv_file_magic_test_file=/lib/libc.so ;; sysv5uw[78]* | sysv4*uw2*) lt_cv_deplibs_check_method=pass_all ;; sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) case $host_vendor in motorola) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; ncr) lt_cv_deplibs_check_method=pass_all ;; sequent) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; sni) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" lt_cv_file_magic_test_file=/lib/libc.so ;; esac ;; esac fi echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6 file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method echo $ac_n "checking for object suffix""... $ac_c" 1>&6 echo "configure:1620: checking for object suffix" >&5 if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else rm -f conftest* echo 'int i = 1;' > conftest.$ac_ext if { (eval echo configure:1626: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then for ac_file in conftest.*; do case $ac_file in *.c) ;; *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;; esac done else { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; } fi rm -f conftest* fi echo "$ac_t""$ac_cv_objext" 1>&6 OBJEXT=$ac_cv_objext ac_objext=$ac_cv_objext echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 echo "configure:1646: checking for executable suffix" >&5 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$CYGWIN" = yes || test "$MINGW32" = yes; then ac_cv_exeext=.exe else rm -f conftest* echo 'int main () { return 0; }' > conftest.$ac_ext ac_cv_exeext= if { (eval echo configure:1656: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then for file in conftest.*; do case $file in *.c | *.C | *.o | *.obj | *.ilk | *.pdb) ;; *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; esac done else { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } fi rm -f conftest* test x"${ac_cv_exeext}" = x && ac_cv_exeext=no fi fi EXEEXT="" test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} echo "$ac_t""${ac_cv_exeext}" 1>&6 ac_exeext=$EXEEXT if test $host != $build; then ac_tool_prefix=${host_alias}- else ac_tool_prefix= fi # Check for command to grab the raw symbol name followed by C symbol from nm. echo $ac_n "checking command to parse $NM output""... $ac_c" 1>&6 echo "configure:1687: checking command to parse $NM output" >&5 if eval "test \"`echo '$''{'lt_cv_sys_global_symbol_pipe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else # These are sane defaults that work on at least a few old systems. # [They come from Ultrix. What could be older than Ultrix?!! ;)] # Character class describing NM global symbol codes. symcode='[BCDEGRST]' # Regexp to match symbols that can be accessed directly from C. sympat='\([_A-Za-z][_A-Za-z0-9]*\)' # Transform the above into a raw symbol and a C symbol. symxfrm='\1 \2\3 \3' # Transform an extracted symbol line into a proper C declaration lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'" # Transform an extracted symbol line into symbol name and symbol address lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" # Define system-specific variables. case $host_os in aix*) symcode='[BCDT]' ;; cygwin* | mingw* | pw32*) symcode='[ABCDGISTW]' ;; hpux*) # Its linker distinguishes data from code symbols lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ;; irix*) symcode='[BCDEGRST]' ;; solaris* | sysv5*) symcode='[BDT]' ;; sysv4) symcode='[DFNSTU]' ;; esac # Handle CRLF in mingw tool chain opt_cr= case $host_os in mingw*) opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac # If we're using GNU nm, then use its standard symbol codes. if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then symcode='[ABCDGISTW]' fi # Try without a prefix undercore, then with it. for ac_symprfx in "" "_"; do # Write the raw and C identifiers. lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" # Check to see that the pipe works correctly. pipe_works=no rm -f conftest* cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then # Now try to grab the symbols. nlist=conftest.nm if { (eval echo configure:1770: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5; } && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" else rm -f "$nlist"T fi # Make sure that we snagged all the symbols we need. if egrep ' nm_test_var$' "$nlist" >/dev/null; then if egrep ' nm_test_func$' "$nlist" >/dev/null; then cat < conftest.$ac_ext #ifdef __cplusplus extern "C" { #endif EOF # Now generate the symbol file. eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext' cat <> conftest.$ac_ext #if defined (__STDC__) && __STDC__ # define lt_ptr void * #else # define lt_ptr char * # define const #endif /* The mapping between symbol names and symbols. */ const struct { const char *name; lt_ptr address; } lt_preloaded_symbols[] = { EOF sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext cat <<\EOF >> conftest.$ac_ext {0, (lt_ptr) 0} }; #ifdef __cplusplus } #endif EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext save_LIBS="$LIBS" save_CFLAGS="$CFLAGS" LIBS="conftstm.$ac_objext" CFLAGS="$CFLAGS$no_builtin_flag" if { (eval echo configure:1821: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then pipe_works=yes fi LIBS="$save_LIBS" CFLAGS="$save_CFLAGS" else echo "cannot find nm_test_func in $nlist" >&5 fi else echo "cannot find nm_test_var in $nlist" >&5 fi else echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 fi else echo "$progname: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* conftst* # Do not use the global_symbol_pipe unless it works. if test "$pipe_works" = yes; then break else lt_cv_sys_global_symbol_pipe= fi done fi global_symbol_pipe="$lt_cv_sys_global_symbol_pipe" if test -z "$lt_cv_sys_global_symbol_pipe"; then global_symbol_to_cdecl= global_symbol_to_c_name_address= else global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl" global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address" fi if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address"; then echo "$ac_t""failed" 1>&6 else echo "$ac_t""ok" 1>&6 fi for ac_hdr in dlfcn.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 echo "configure:1870: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:1880: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_$ac_safe=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` cat >> confdefs.h <&6 fi done # Only perform the check for file, if the check method requires it case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6 echo "configure:1915: checking for ${ac_tool_prefix}file" >&5 if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else case $MAGIC_CMD in /*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; ?:/*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. ;; *) ac_save_MAGIC_CMD="$MAGIC_CMD" IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="/usr/bin:$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/${ac_tool_prefix}file; then lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | egrep "$file_magic_regex" > /dev/null; then : else cat <&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org EOF fi ;; esac fi break fi done IFS="$ac_save_ifs" MAGIC_CMD="$ac_save_MAGIC_CMD" ;; esac fi MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then echo "$ac_t""$MAGIC_CMD" 1>&6 else echo "$ac_t""no" 1>&6 fi if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then echo $ac_n "checking for file""... $ac_c" 1>&6 echo "configure:1977: checking for file" >&5 if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else case $MAGIC_CMD in /*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; ?:/*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. ;; *) ac_save_MAGIC_CMD="$MAGIC_CMD" IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="/usr/bin:$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/file; then lt_cv_path_MAGIC_CMD="$ac_dir/file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | egrep "$file_magic_regex" > /dev/null; then : else cat <&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org EOF fi ;; esac fi break fi done IFS="$ac_save_ifs" MAGIC_CMD="$ac_save_MAGIC_CMD" ;; esac fi MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then echo "$ac_t""$MAGIC_CMD" 1>&6 else echo "$ac_t""no" 1>&6 fi else MAGIC_CMD=: fi fi fi ;; esac # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ac_tool_prefix}ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:2048: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" break fi done IFS="$ac_save_ifs" fi fi RANLIB="$ac_cv_prog_RANLIB" if test -n "$RANLIB"; then echo "$ac_t""$RANLIB" 1>&6 else echo "$ac_t""no" 1>&6 fi if test -z "$ac_cv_prog_RANLIB"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:2080: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_RANLIB="ranlib" break fi done IFS="$ac_save_ifs" test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" fi fi RANLIB="$ac_cv_prog_RANLIB" if test -n "$RANLIB"; then echo "$ac_t""$RANLIB" 1>&6 else echo "$ac_t""no" 1>&6 fi else RANLIB=":" fi fi # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:2115: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" break fi done IFS="$ac_save_ifs" fi fi STRIP="$ac_cv_prog_STRIP" if test -n "$STRIP"; then echo "$ac_t""$STRIP" 1>&6 else echo "$ac_t""no" 1>&6 fi if test -z "$ac_cv_prog_STRIP"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:2147: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_STRIP="strip" break fi done IFS="$ac_save_ifs" test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":" fi fi STRIP="$ac_cv_prog_STRIP" if test -n "$STRIP"; then echo "$ac_t""$STRIP" 1>&6 else echo "$ac_t""no" 1>&6 fi else STRIP=":" fi fi enable_dlopen=no enable_win32_dll=yes # Check whether --enable-libtool-lock or --disable-libtool-lock was given. if test "${enable_libtool_lock+set}" = set; then enableval="$enable_libtool_lock" : fi test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in *-*-irix6*) # Find out which ABI we are using. echo '#line 2196 "configure"' > conftest.$ac_ext if { (eval echo configure:2197: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6 echo "configure:2218: checking whether the C compiler needs -belf" >&5 if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* lt_cv_cc_needs_belf=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* lt_cv_cc_needs_belf=no fi rm -f conftest* ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross fi echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6 if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; *-*-cygwin* | *-*-mingw* | *-*-pw32*) # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. set dummy ${ac_tool_prefix}dlltool; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:2268: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$DLLTOOL"; then ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" break fi done IFS="$ac_save_ifs" fi fi DLLTOOL="$ac_cv_prog_DLLTOOL" if test -n "$DLLTOOL"; then echo "$ac_t""$DLLTOOL" 1>&6 else echo "$ac_t""no" 1>&6 fi if test -z "$ac_cv_prog_DLLTOOL"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "dlltool", so it can be a program name with args. set dummy dlltool; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:2300: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$DLLTOOL"; then ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_DLLTOOL="dlltool" break fi done IFS="$ac_save_ifs" test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false" fi fi DLLTOOL="$ac_cv_prog_DLLTOOL" if test -n "$DLLTOOL"; then echo "$ac_t""$DLLTOOL" 1>&6 else echo "$ac_t""no" 1>&6 fi else DLLTOOL="false" fi fi # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. set dummy ${ac_tool_prefix}as; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:2335: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$AS"; then ac_cv_prog_AS="$AS" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_AS="${ac_tool_prefix}as" break fi done IFS="$ac_save_ifs" fi fi AS="$ac_cv_prog_AS" if test -n "$AS"; then echo "$ac_t""$AS" 1>&6 else echo "$ac_t""no" 1>&6 fi if test -z "$ac_cv_prog_AS"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "as", so it can be a program name with args. set dummy as; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:2367: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$AS"; then ac_cv_prog_AS="$AS" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_AS="as" break fi done IFS="$ac_save_ifs" test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false" fi fi AS="$ac_cv_prog_AS" if test -n "$AS"; then echo "$ac_t""$AS" 1>&6 else echo "$ac_t""no" 1>&6 fi else AS="false" fi fi # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. set dummy ${ac_tool_prefix}objdump; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:2402: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$OBJDUMP"; then ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" break fi done IFS="$ac_save_ifs" fi fi OBJDUMP="$ac_cv_prog_OBJDUMP" if test -n "$OBJDUMP"; then echo "$ac_t""$OBJDUMP" 1>&6 else echo "$ac_t""no" 1>&6 fi if test -z "$ac_cv_prog_OBJDUMP"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "objdump", so it can be a program name with args. set dummy objdump; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:2434: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$OBJDUMP"; then ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_OBJDUMP="objdump" break fi done IFS="$ac_save_ifs" test -z "$ac_cv_prog_OBJDUMP" && ac_cv_prog_OBJDUMP="false" fi fi OBJDUMP="$ac_cv_prog_OBJDUMP" if test -n "$OBJDUMP"; then echo "$ac_t""$OBJDUMP" 1>&6 else echo "$ac_t""no" 1>&6 fi else OBJDUMP="false" fi fi # recent cygwin and mingw systems supply a stub DllMain which the user # can override, but on older systems we have to supply one echo $ac_n "checking if libtool should supply DllMain function""... $ac_c" 1>&6 echo "configure:2470: checking if libtool should supply DllMain function" >&5 if eval "test \"`echo '$''{'lt_cv_need_dllmain'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* lt_cv_need_dllmain=no else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* lt_cv_need_dllmain=yes fi rm -f conftest* fi echo "$ac_t""$lt_cv_need_dllmain" 1>&6 case $host/$CC in *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*) # old mingw systems require "-dll" to link a DLL, while more recent ones # require "-mdll" SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -mdll" echo $ac_n "checking how to link DLLs""... $ac_c" 1>&6 echo "configure:2504: checking how to link DLLs" >&5 if eval "test \"`echo '$''{'lt_cv_cc_dll_switch'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* lt_cv_cc_dll_switch=-mdll else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* lt_cv_cc_dll_switch=-dll fi rm -f conftest* fi echo "$ac_t""$lt_cv_cc_dll_switch" 1>&6 CFLAGS="$SAVE_CFLAGS" ;; *-*-cygwin* | *-*-pw32*) # cygwin systems need to pass --dll to the linker, and not link # crt.o which will require a WinMain@16 definition. lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;; esac ;; esac # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. Xsed='sed -e s/^X//' sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g' # Sed substitution to delay expansion of an escaped shell variable in a # double_quote_subst'ed string. delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' # Constants: rm="rm -f" # Global variables: default_ofile=libtool can_build_shared=yes # All known linkers require a `.a' archive for static linking (except M$VC, # which needs '.lib'). libext=a ltmain="$ac_aux_dir/ltmain.sh" ofile="$default_ofile" with_gnu_ld="$lt_cv_prog_gnu_ld" need_locks="$enable_libtool_lock" old_CC="$CC" old_CFLAGS="$CFLAGS" # Set sane defaults for various variables test -z "$AR" && AR=ar test -z "$AR_FLAGS" && AR_FLAGS=cru test -z "$AS" && AS=as test -z "$CC" && CC=cc test -z "$DLLTOOL" && DLLTOOL=dlltool test -z "$LD" && LD=ld test -z "$LN_S" && LN_S="ln -s" test -z "$MAGIC_CMD" && MAGIC_CMD=file test -z "$NM" && NM=nm test -z "$OBJDUMP" && OBJDUMP=objdump test -z "$RANLIB" && RANLIB=: test -z "$STRIP" && STRIP=: test -z "$ac_objext" && ac_objext=o if test x"$host" != x"$build"; then ac_tool_prefix=${host_alias}- else ac_tool_prefix= fi # Transform linux* to *-*-linux-gnu*, to support old configure scripts. case $host_os in linux-gnu*) ;; linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'` esac case $host_os in aix3*) # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi ;; esac # Determine commands to create old-style static archives. old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' old_postinstall_cmds='chmod 644 $oldlib' old_postuninstall_cmds= if test -n "$RANLIB"; then case $host_os in openbsd*) old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" ;; *) old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" ;; esac old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" fi # Allow CC to be a program name with arguments. set dummy $CC compiler="$2" echo $ac_n "checking for objdir""... $ac_c" 1>&6 echo "configure:2630: checking for objdir" >&5 rm -f .libs 2>/dev/null mkdir .libs 2>/dev/null if test -d .libs; then objdir=.libs else # MS-DOS does not allow filenames that begin with a dot. objdir=_libs fi rmdir .libs 2>/dev/null echo "$ac_t""$objdir" 1>&6 # Check whether --with-pic or --without-pic was given. if test "${with_pic+set}" = set; then withval="$with_pic" pic_mode="$withval" else pic_mode=default fi test -z "$pic_mode" && pic_mode=default # We assume here that the value for lt_cv_prog_cc_pic will not be cached # in isolation, and that seeing it set (from the cache) indicates that # the associated values are set (in the cache) correctly too. echo $ac_n "checking for $compiler option to produce PIC""... $ac_c" 1>&6 echo "configure:2657: checking for $compiler option to produce PIC" >&5 if eval "test \"`echo '$''{'lt_cv_prog_cc_pic'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else lt_cv_prog_cc_pic= lt_cv_prog_cc_shlib= lt_cv_prog_cc_wl= lt_cv_prog_cc_static= lt_cv_prog_cc_no_builtin= lt_cv_prog_cc_can_build_shared=$can_build_shared if test "$GCC" = yes; then lt_cv_prog_cc_wl='-Wl,' lt_cv_prog_cc_static='-static' case $host_os in aix*) # Below there is a dirty hack to force normal static linking with -ldl # The problem is because libdl dynamically linked with both libc and # libC (AIX C++ library), which obviously doesn't included in libraries # list by gcc. This cause undefined symbols with -static flags. # This hack allows C programs to be linked with "-static -ldl", but # not sure about C++ programs. lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC" ;; amigaos*) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4' ;; beos* | irix5* | irix6* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files lt_cv_prog_cc_pic='-fno-common' ;; cygwin* | mingw* | pw32* | os2*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). lt_cv_prog_cc_pic='-DDLL_EXPORT' ;; sysv4*MP*) if test -d /usr/nec; then lt_cv_prog_cc_pic=-Kconform_pic fi ;; *) lt_cv_prog_cc_pic='-fPIC' ;; esac else # PORTME Check for PIC flags for the system compiler. case $host_os in aix3* | aix4* | aix5*) lt_cv_prog_cc_wl='-Wl,' # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_cv_prog_cc_static='-Bstatic' else lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp' fi ;; hpux9* | hpux10* | hpux11*) # Is there a better lt_cv_prog_cc_static that works with the bundled CC? lt_cv_prog_cc_wl='-Wl,' lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive" lt_cv_prog_cc_pic='+Z' ;; irix5* | irix6*) lt_cv_prog_cc_wl='-Wl,' lt_cv_prog_cc_static='-non_shared' # PIC (with -KPIC) is the default. ;; cygwin* | mingw* | pw32* | os2*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). lt_cv_prog_cc_pic='-DDLL_EXPORT' ;; newsos6) lt_cv_prog_cc_pic='-KPIC' lt_cv_prog_cc_static='-Bstatic' ;; osf3* | osf4* | osf5*) # All OSF/1 code is PIC. lt_cv_prog_cc_wl='-Wl,' lt_cv_prog_cc_static='-non_shared' ;; sco3.2v5*) lt_cv_prog_cc_pic='-Kpic' lt_cv_prog_cc_static='-dn' lt_cv_prog_cc_shlib='-belf' ;; solaris*) lt_cv_prog_cc_pic='-KPIC' lt_cv_prog_cc_static='-Bstatic' lt_cv_prog_cc_wl='-Wl,' ;; sunos4*) lt_cv_prog_cc_pic='-PIC' lt_cv_prog_cc_static='-Bstatic' lt_cv_prog_cc_wl='-Qoption ld ' ;; sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) lt_cv_prog_cc_pic='-KPIC' lt_cv_prog_cc_static='-Bstatic' if test "x$host_vendor" = xsni; then lt_cv_prog_cc_wl='-LD' else lt_cv_prog_cc_wl='-Wl,' fi ;; uts4*) lt_cv_prog_cc_pic='-pic' lt_cv_prog_cc_static='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec ;then lt_cv_prog_cc_pic='-Kconform_pic' lt_cv_prog_cc_static='-Bstatic' fi ;; *) lt_cv_prog_cc_can_build_shared=no ;; esac fi fi if test -z "$lt_cv_prog_cc_pic"; then echo "$ac_t""none" 1>&6 else echo "$ac_t""$lt_cv_prog_cc_pic" 1>&6 # Check to make sure the pic_flag actually works. echo $ac_n "checking if $compiler PIC flag $lt_cv_prog_cc_pic works""... $ac_c" 1>&6 echo "configure:2809: checking if $compiler PIC flag $lt_cv_prog_cc_pic works" >&5 if eval "test \"`echo '$''{'lt_cv_prog_cc_pic_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC" cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* case $host_os in hpux9* | hpux10* | hpux11*) # On HP-UX, both CC and GCC only warn that PIC is supported... then # they create non-PIC objects. So, if there were any warnings, we # assume that PIC is not supported. if test -s conftest.err; then lt_cv_prog_cc_pic_works=no else lt_cv_prog_cc_pic_works=yes fi ;; *) lt_cv_prog_cc_pic_works=yes ;; esac else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* lt_cv_prog_cc_pic_works=no fi rm -f conftest* CFLAGS="$save_CFLAGS" fi if test "X$lt_cv_prog_cc_pic_works" = Xno; then lt_cv_prog_cc_pic= lt_cv_prog_cc_can_build_shared=no else lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic" fi echo "$ac_t""$lt_cv_prog_cc_pic_works" 1>&6 fi # Check for any special shared library compilation flags. if test -n "$lt_cv_prog_cc_shlib"; then echo "configure: warning: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" 1>&2 if echo "$old_CC $old_CFLAGS " | egrep -e "[ ]$lt_cv_prog_cc_shlib[ ]" >/dev/null; then : else echo "configure: warning: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" 1>&2 lt_cv_prog_cc_can_build_shared=no fi fi echo $ac_n "checking if $compiler static flag $lt_cv_prog_cc_static works""... $ac_c" 1>&6 echo "configure:2875: checking if $compiler static flag $lt_cv_prog_cc_static works" >&5 if eval "test \"`echo '$''{'lt_cv_prog_cc_static_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else lt_cv_prog_cc_static_works=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* lt_cv_prog_cc_static_works=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* LDFLAGS="$save_LDFLAGS" fi # Belt *and* braces to stop my trousers falling down: test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static= echo "$ac_t""$lt_cv_prog_cc_static_works" 1>&6 pic_flag="$lt_cv_prog_cc_pic" special_shlib_compile_flags="$lt_cv_prog_cc_shlib" wl="$lt_cv_prog_cc_wl" link_static_flag="$lt_cv_prog_cc_static" no_builtin_flag="$lt_cv_prog_cc_no_builtin" can_build_shared="$lt_cv_prog_cc_can_build_shared" # Check to see if options -o and -c are simultaneously supported by compiler echo $ac_n "checking if $compiler supports -c -o file.$ac_objext""... $ac_c" 1>&6 echo "configure:2917: checking if $compiler supports -c -o file.$ac_objext" >&5 if eval "test \"`echo '$''{'lt_cv_compiler_c_o'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else $rm -r conftest 2>/dev/null mkdir conftest cd conftest echo "int some_variable = 0;" > conftest.$ac_ext mkdir out # According to Tom Tromey, Ian Lance Taylor reported there are C compilers # that will create temporary files in the current directory regardless of # the output directory. Thus, making CWD read-only will cause this test # to fail, enabling locking or at least warning the user not to do parallel # builds. chmod -w . save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -o out/conftest2.$ac_objext" compiler_c_o=no if { (eval echo configure:2936: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings if test -s out/conftest.err; then lt_cv_compiler_c_o=no else lt_cv_compiler_c_o=yes fi else # Append any errors to the config.log. cat out/conftest.err 1>&5 lt_cv_compiler_c_o=no fi CFLAGS="$save_CFLAGS" chmod u+w . $rm conftest* out/* rmdir out cd .. rmdir conftest $rm -r conftest 2>/dev/null fi compiler_c_o=$lt_cv_compiler_c_o echo "$ac_t""$compiler_c_o" 1>&6 if test x"$compiler_c_o" = x"yes"; then # Check to see if we can write to a .lo echo $ac_n "checking if $compiler supports -c -o file.lo""... $ac_c" 1>&6 echo "configure:2965: checking if $compiler supports -c -o file.lo" >&5 if eval "test \"`echo '$''{'lt_cv_compiler_o_lo'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else lt_cv_compiler_o_lo=no save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -c -o conftest.lo" save_objext="$ac_objext" ac_objext=lo cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then lt_cv_compiler_o_lo=no else lt_cv_compiler_o_lo=yes fi else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* ac_objext="$save_objext" CFLAGS="$save_CFLAGS" fi compiler_o_lo=$lt_cv_compiler_o_lo echo "$ac_t""$compiler_o_lo" 1>&6 else compiler_o_lo=no fi # Check to see if we can do hard links to lock some files if needed hard_links="nottested" if test "$compiler_c_o" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user echo $ac_n "checking if we can lock with hard links""... $ac_c" 1>&6 echo "configure:3014: checking if we can lock with hard links" >&5 hard_links=yes $rm conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no echo "$ac_t""$hard_links" 1>&6 if test "$hard_links" = no; then echo "configure: warning: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" 1>&2 need_locks=warn fi else need_locks=no fi if test "$GCC" = yes; then # Check to see if options -fno-rtti -fno-exceptions are supported by compiler echo $ac_n "checking if $compiler supports -fno-rtti -fno-exceptions""... $ac_c" 1>&6 echo "configure:3033: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 echo "int some_variable = 0;" > conftest.$ac_ext save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext" compiler_rtti_exceptions=no cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then compiler_rtti_exceptions=no else compiler_rtti_exceptions=yes fi else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* CFLAGS="$save_CFLAGS" echo "$ac_t""$compiler_rtti_exceptions" 1>&6 if test "$compiler_rtti_exceptions" = "yes"; then no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions' else no_builtin_flag=' -fno-builtin' fi fi # See if the linker supports building shared libraries. echo $ac_n "checking whether the linker ($LD) supports shared libraries""... $ac_c" 1>&6 echo "configure:3073: checking whether the linker ($LD) supports shared libraries" >&5 allow_undefined_flag= no_undefined_flag= need_lib_prefix=unknown need_version=unknown # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments archive_cmds= archive_expsym_cmds= old_archive_from_new_cmds= old_archive_from_expsyms_cmds= export_dynamic_flag_spec= whole_archive_flag_spec= thread_safe_flag_spec= hardcode_into_libs=no hardcode_libdir_flag_spec= hardcode_libdir_separator= hardcode_direct=no hardcode_minus_L=no hardcode_shlibpath_var=unsupported runpath_var= link_all_deplibs=unknown always_export_symbols=no export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list include_expsyms= # exclude_expsyms can be an egrep regular expression of symbols to exclude # it will be wrapped by ` (' and `)$', so one must not match beginning or # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', # as well as any symbol that contains `d'. exclude_expsyms="_GLOBAL_OFFSET_TABLE_" # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. extract_expsyms_cmds= case $host_os in cygwin* | mingw* | pw32*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$GCC" != yes; then with_gnu_ld=no fi ;; openbsd*) with_gnu_ld=no ;; esac ld_shlibs=yes if test "$with_gnu_ld" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' # See if GNU ld supports shared libraries. case $host_os in aix3* | aix4* | aix5*) # On AIX, the GNU linker is very broken # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available. ld_shlibs=no cat <&2 *** Warning: the GNU linker, at least up to release 2.9.1, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to modify your PATH *** so that a non-GNU linker is found, and then restart. EOF ;; amigaos*) archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes # Samuel A. Falvo II reports # that the semantics of dynamic libraries on AmigaOS, at least up # to version 4, is to share data among multiple programs linked # with the same dynamic library. Since this doesn't match the # behavior of shared libraries on other platforms, we can use # them. ld_shlibs=no ;; beos*) if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then allow_undefined_flag=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else ld_shlibs=no fi ;; cygwin* | mingw* | pw32*) # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec='-L$libdir' allow_undefined_flag=unsupported always_export_symbols=yes extract_expsyms_cmds='test -f $output_objdir/impgen.c || \ sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~ test -f $output_objdir/impgen.exe || (cd $output_objdir && \ if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \ else $CC -o impgen impgen.c ; fi)~ $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def' old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib' # cygwin and mingw dlls have different entry points and sets of symbols # to exclude. # FIXME: what about values for MSVC? dll_entry=__cygwin_dll_entry@12 dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~ case $host_os in mingw*) # mingw values dll_entry=_DllMainCRTStartup@12 dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~ ;; esac # mingw and cygwin differ, and it's simplest to just exclude the union # of the two symbol sets. dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12 # recent cygwin and mingw systems supply a stub DllMain which the user # can override, but on older systems we have to supply one (in ltdll.c) if test "x$lt_cv_need_dllmain" = "xyes"; then ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext " ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~ test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~' else ltdll_obj= ltdll_cmds= fi # Extract the symbol export list from an `--export-all' def file, # then regenerate the def file from the symbol export list, so that # the compiled dll only exports the symbol export list. # Be careful not to strip the DATA tag left be newer dlltools. export_symbols_cmds="$ltdll_cmds"' $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~ sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is. # If DATA tags from a recent dlltool are present, honour them! archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname-def; else echo EXPORTS > $output_objdir/$soname-def; _lt_hint=1; cat $export_symbols | while read symbol; do set dummy \$symbol; case \$# in 2) echo " \$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;; *) echo " \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;; esac; _lt_hint=`expr 1 + \$_lt_hint`; done; fi~ '"$ltdll_cmds"' $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~ $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~ $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags' ;; netbsd*) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris* | sysv5*) if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then ld_shlibs=no cat <&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. EOF elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; sunos4*) archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= hardcode_direct=yes hardcode_shlibpath_var=no ;; *) if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; esac if test "$ld_shlibs" = yes; then runpath_var=LD_RUN_PATH hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' export_dynamic_flag_spec='${wl}--export-dynamic' case $host_os in cygwin* | mingw* | pw32*) # dlltool doesn't understand --whole-archive et. al. whole_archive_flag_spec= ;; *) # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else whole_archive_flag_spec= fi ;; esac fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) allow_undefined_flag=unsupported always_export_symbols=yes archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. hardcode_minus_L=yes if test "$GCC" = yes && test -z "$link_static_flag"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. hardcode_direct=unsupported fi ;; aix4* | aix5*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[23]|aix4.[23].*|aix5*) for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then aix_use_runtimelinking=yes break fi done esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. hardcode_direct=yes archive_cmds='' hardcode_libdir_separator=':' if test "$GCC" = yes; then case $host_os in aix4.[012]|aix4.[012].*) collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && \ strings "$collect2name" | grep resolve_lib_name >/dev/null then # We have reworked collect2 hardcode_direct=yes else # We have old collect2 hardcode_direct=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking hardcode_minus_L=yes hardcode_libdir_flag_spec='-L$libdir' hardcode_libdir_separator= fi esac shared_flag='-shared' else # not using gcc if test "$host_cpu" = ia64; then shared_flag='${wl}-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi # It seems that -bexpall can do strange things, so it is better to # generate a list of symbols to export. always_export_symbols=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. allow_undefined_flag='-berok' hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib' archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' allow_undefined_flag="-z nodefs" archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" else hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib' # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. allow_undefined_flag='${wl}-berok' # This is a bit strange, but is similar to how AIX traditionally builds # it's shared libraries. archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname' fi fi ;; amigaos*) archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes # see comment about different semantics on the GNU ld section ld_shlibs=no ;; cygwin* | mingw* | pw32*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec=' ' allow_undefined_flag=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # FIXME: Setting linknames here is a bad hack. archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. old_archive_from_new_cmds='true' # FIXME: Should let the user specify the lib program. old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' fix_srcfile_path='`cygpath -w "$srcfile"`' ;; darwin* | rhapsody*) case "$host_os" in rhapsody* | darwin1.[012]) allow_undefined_flag='-undefined suppress' ;; *) # Darwin 1.3 on allow_undefined_flag='-flat_namespace -undefined suppress' ;; esac # FIXME: Relying on posixy $() will cause problems for # cross-compilation, but unfortunately the echo tests do not # yet detect zsh echo's removal of \ escapes. archive_cmds='$nonopt $(test "x$module" = xyes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring' # We need to add '_' to the symbols in $export_symbols first #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols' hardcode_direct=yes hardcode_shlibpath_var=no whole_archive_flag_spec='-all_load $convenience' ;; freebsd1*) ld_shlibs=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd*) archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; hpux9* | hpux10* | hpux11*) case $host_os in hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;; *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;; esac hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=yes hardcode_minus_L=yes # Not in the search PATH, but as the default # location of the library. export_dynamic_flag_spec='${wl}-E' ;; irix5* | irix6*) if test "$GCC" = yes; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' fi hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: link_all_deplibs=yes ;; netbsd*) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; newsos6) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: hardcode_shlibpath_var=no ;; openbsd*) hardcode_direct=yes hardcode_shlibpath_var=no if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='${wl}-rpath,$libdir' export_dynamic_flag_spec='${wl}-E' else case "$host_os" in openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-R$libdir' ;; *) archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ;; esac fi ;; os2*) hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes allow_undefined_flag=unsupported archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' fi hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' #Both c and cxx compiler support -rpath directly hardcode_libdir_flag_spec='-rpath $libdir' fi hardcode_libdir_separator=: ;; sco3.2v5*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes export_dynamic_flag_spec='${wl}-Bexport' ;; solaris*) # gcc --version < 3.0 without binutils cannot create self contained # shared libraries reliably, requiring libgcc.a to resolve some of # the object symbols generated in some cases. Libraries that use # assert need libgcc.a to resolve __eprintf, for example. Linking # a copy of libgcc.a into every shared library to guarantee resolving # such symbols causes other problems: According to Tim Van Holder # , C++ libraries end up with a separate # (to the application) exception stack for one thing. no_undefined_flag=' -z defs' if test "$GCC" = yes; then case `$CC --version 2>/dev/null` in [12].*) cat <&2 *** Warning: Releases of GCC earlier than version 3.0 cannot reliably *** create self contained shared libraries on Solaris systems, without *** introducing a dependency on libgcc.a. Therefore, libtool is disabling *** -no-undefined support, which will at least allow you to build shared *** libraries. However, you may find that when you link such libraries *** into an application without using GCC, you have to manually add *** \`gcc --print-libgcc-file-name\` to the link command. We urge you to *** upgrade to a newer version of GCC. Another option is to rebuild your *** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer. EOF no_undefined_flag= ;; esac fi # $CC -shared without GNU ld will not create a library from C++ # object files and a static libstdc++, better avoid it by now archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' hardcode_libdir_flag_spec='-R$libdir' hardcode_shlibpath_var=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) # Supported since Solaris 2.6 (maybe 2.5.1?) whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; esac link_all_deplibs=yes ;; sunos4*) if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi hardcode_libdir_flag_spec='-L$libdir' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; sysv4) if test "x$host_vendor" = xsno; then archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes # is this really true??? else archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=no #Motorola manual says yes, but my tests say they lie fi runpath_var='LD_RUN_PATH' hardcode_shlibpath_var=no ;; sysv4.3*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no export_dynamic_flag_spec='-Bexport' ;; sysv5*) no_undefined_flag=' -z text' # $CC -shared without GNU ld will not create a library from C++ # object files and a static libstdc++, better avoid it by now archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' hardcode_libdir_flag_spec= hardcode_shlibpath_var=no runpath_var='LD_RUN_PATH' ;; uts4*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; dgux*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; sysv4*MP*) if test -d /usr/nec; then archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes ld_shlibs=yes fi ;; sysv4.2uw2*) archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_minus_L=no hardcode_shlibpath_var=no hardcode_runpath_var=yes runpath_var=LD_RUN_PATH ;; sysv5uw7* | unixware7*) no_undefined_flag='${wl}-z ${wl}text' if test "$GCC" = yes; then archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' fi runpath_var='LD_RUN_PATH' hardcode_shlibpath_var=no ;; *) ld_shlibs=no ;; esac fi echo "$ac_t""$ld_shlibs" 1>&6 test "$ld_shlibs" = no && can_build_shared=no # Check hardcoding attributes. echo $ac_n "checking how to hardcode library paths into programs""... $ac_c" 1>&6 echo "configure:3757: checking how to hardcode library paths into programs" >&5 hardcode_action= if test -n "$hardcode_libdir_flag_spec" || \ test -n "$runpath_var"; then # We can hardcode non-existant directories. if test "$hardcode_direct" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$hardcode_shlibpath_var" != no && test "$hardcode_minus_L" != no; then # Linking always hardcodes the temporary library directory. hardcode_action=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. hardcode_action=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. hardcode_action=unsupported fi echo "$ac_t""$hardcode_action" 1>&6 striplib= old_striplib= echo $ac_n "checking whether stripping libraries is possible""... $ac_c" 1>&6 echo "configure:3785: checking whether stripping libraries is possible" >&5 if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" echo "$ac_t""yes" 1>&6 else echo "$ac_t""no" 1>&6 fi reload_cmds='$LD$reload_flag -o $output$reload_objs' test -z "$deplibs_check_method" && deplibs_check_method=unknown # PORTME Fill in your ld.so characteristics echo $ac_n "checking dynamic linker characteristics""... $ac_c" 1>&6 echo "configure:3799: checking dynamic linker characteristics" >&5 library_names_spec= libname_spec='lib$name' soname_spec= postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" case $host_os in aix3*) version_type=linux library_names_spec='${libname}${release}.so$versuffix $libname.a' shlibpath_var=LIBPATH # AIX has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}.so$major' ;; aix4* | aix5*) version_type=linux if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can # not hardcode correct soname into executable. Probably we can # add versioning support to collect2, so additional links can # be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}.so$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' ;; beos*) library_names_spec='${libname}.so' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi4*) version_type=linux need_version=no library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' soname_spec='${libname}${release}.so$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" export_dynamic_flag_spec=-rdynamic # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32*) version_type=windows need_version=no need_lib_prefix=no case $GCC,$host_os in yes,cygwin*) library_names_spec='$libname.dll.a' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog .libs/$dlname \$dldir/$dlname' postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $rm \$dlpath' ;; yes,mingw*) library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"` ;; yes,pw32*) library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/./-/g'`${versuffix}.dll' ;; *) library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib' ;; esac dynamic_linker='Win32 ld.exe' # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no # FIXME: Relying on posixy $() will cause problems for # cross-compilation, but unfortunately the echo tests do not # yet detect zsh echo's removal of \ escapes. library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)' soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH ;; freebsd1*) dynamic_linker=no ;; freebsd*) objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2*) shlibpath_overrides_runpath=yes ;; *) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; esac ;; gnu*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so' soname_spec='${libname}${release}.so$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. dynamic_linker="$host_os dld.sl" version_type=sunos need_lib_prefix=no need_version=no shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' soname_spec='${libname}${release}.sl$major' # HP-UX runs *really* slowly unless shared libraries are mode 555. postinstall_cmds='chmod 555 $lib' ;; irix5* | irix6*) version_type=irix need_lib_prefix=no need_version=no soname_spec='${libname}${release}.so$major' library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so' case $host_os in irix5*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" ;; # No shared lib support for Linux oldld, aout, or coff. linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*) dynamic_linker=no ;; # This must be Linux ELF. linux-gnu*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' soname_spec='${libname}${release}.so$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' soname_spec='${libname}${release}.so$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; openbsd*) version_type=sunos need_lib_prefix=no need_version=no if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case "$host_os" in openbsd2.[89] | openbsd2.[89].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH ;; os2*) libname_spec='$name' need_lib_prefix=no library_names_spec='$libname.dll $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_version=no soname_spec='${libname}${release}.so' library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; sco3.2v5*) version_type=osf soname_spec='${libname}${release}.so$major' library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' shlibpath_var=LD_LIBRARY_PATH ;; solaris*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' soname_spec='${libname}${release}.so$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) version_type=linux library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' soname_spec='${libname}${release}.so$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; uts4*) version_type=linux library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' soname_spec='${libname}${release}.so$major' shlibpath_var=LD_LIBRARY_PATH ;; dgux*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' soname_spec='${libname}${release}.so$major' shlibpath_var=LD_LIBRARY_PATH ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so' soname_spec='$libname.so.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; *) dynamic_linker=no ;; esac echo "$ac_t""$dynamic_linker" 1>&6 test "$dynamic_linker" = no && can_build_shared=no # Report the final consequences. echo $ac_n "checking if libtool supports shared libraries""... $ac_c" 1>&6 echo "configure:4196: checking if libtool supports shared libraries" >&5 echo "$ac_t""$can_build_shared" 1>&6 echo $ac_n "checking whether to build shared libraries""... $ac_c" 1>&6 echo "configure:4200: checking whether to build shared libraries" >&5 test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case "$host_os" in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix4*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac echo "$ac_t""$enable_shared" 1>&6 echo $ac_n "checking whether to build static libraries""... $ac_c" 1>&6 echo "configure:4223: checking whether to build static libraries" >&5 # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes echo "$ac_t""$enable_static" 1>&6 if test "$hardcode_action" = relink; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi if test "x$enable_dlopen" != xyes; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown else lt_cv_dlopen=no lt_cv_dlopen_libs= case $host_os in beos*) lt_cv_dlopen="load_add_on" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; cygwin* | mingw* | pw32*) lt_cv_dlopen="LoadLibrary" lt_cv_dlopen_libs= ;; *) echo $ac_n "checking for shl_load""... $ac_c" 1>&6 echo "configure:4264: checking for shl_load" >&5 if eval "test \"`echo '$''{'ac_cv_func_shl_load'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char shl_load(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_shl_load) || defined (__stub___shl_load) choke me #else shl_load(); #endif ; return 0; } EOF if { (eval echo configure:4292: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_shl_load=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_shl_load=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'shl_load`\" = yes"; then echo "$ac_t""yes" 1>&6 lt_cv_dlopen="shl_load" else echo "$ac_t""no" 1>&6 echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6 echo "configure:4310: checking for shl_load in -ldld" >&5 ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-ldld $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" else echo "$ac_t""no" 1>&6 echo $ac_n "checking for dlopen""... $ac_c" 1>&6 echo "configure:4348: checking for dlopen" >&5 if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char dlopen(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_dlopen) || defined (__stub___dlopen) choke me #else dlopen(); #endif ; return 0; } EOF if { (eval echo configure:4376: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_dlopen=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_dlopen=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'dlopen`\" = yes"; then echo "$ac_t""yes" 1>&6 lt_cv_dlopen="dlopen" else echo "$ac_t""no" 1>&6 echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6 echo "configure:4394: checking for dlopen in -ldl" >&5 ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-ldl $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else echo "$ac_t""no" 1>&6 echo $ac_n "checking for dlopen in -lsvld""... $ac_c" 1>&6 echo "configure:4432: checking for dlopen in -lsvld" >&5 ac_lib_var=`echo svld'_'dlopen | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lsvld $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" else echo "$ac_t""no" 1>&6 echo $ac_n "checking for dld_link in -ldld""... $ac_c" 1>&6 echo "configure:4470: checking for dld_link in -ldld" >&5 ac_lib_var=`echo dld'_'dld_link | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-ldld $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" else echo "$ac_t""no" 1>&6 fi fi fi fi fi fi ;; esac if test "x$lt_cv_dlopen" != xno; then enable_dlopen=yes else enable_dlopen=no fi case $lt_cv_dlopen in dlopen) save_CPPFLAGS="$CPPFLAGS" test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" save_LDFLAGS="$LDFLAGS" eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" save_LIBS="$LIBS" LIBS="$lt_cv_dlopen_libs $LIBS" echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6 echo "configure:4545: checking whether a program can dlopen itself" >&5 if eval "test \"`echo '$''{'lt_cv_dlopen_self'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$cross_compiling" = yes; then : lt_cv_dlopen_self=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif #ifdef __cplusplus extern "C" void exit (int); #endif void fnord() { int i=42;} int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; /* dlclose (self); */ } exit (status); } EOF if { (eval echo configure:4616: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; x$lt_unknown|x*) lt_cv_dlopen_self=no ;; esac else : # compilation failed lt_cv_dlopen_self=no fi fi rm -fr conftest* fi echo "$ac_t""$lt_cv_dlopen_self" 1>&6 if test "x$lt_cv_dlopen_self" = xyes; then LDFLAGS="$LDFLAGS $link_static_flag" echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6 echo "configure:4639: checking whether a statically linked program can dlopen itself" >&5 if eval "test \"`echo '$''{'lt_cv_dlopen_self_static'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$cross_compiling" = yes; then : lt_cv_dlopen_self_static=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif #ifdef __cplusplus extern "C" void exit (int); #endif void fnord() { int i=42;} int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; /* dlclose (self); */ } exit (status); } EOF if { (eval echo configure:4710: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;; esac else : # compilation failed lt_cv_dlopen_self_static=no fi fi rm -fr conftest* fi echo "$ac_t""$lt_cv_dlopen_self_static" 1>&6 fi CPPFLAGS="$save_CPPFLAGS" LDFLAGS="$save_LDFLAGS" LIBS="$save_LIBS" ;; esac case $lt_cv_dlopen_self in yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; *) enable_dlopen_self=unknown ;; esac case $lt_cv_dlopen_self_static in yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; *) enable_dlopen_self_static=unknown ;; esac fi if test "$enable_shared" = yes && test "$GCC" = yes; then case $archive_cmds in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. echo $ac_n "checking whether -lc should be explicitly linked in""... $ac_c" 1>&6 echo "configure:4759: checking whether -lc should be explicitly linked in" >&5 if eval "test \"`echo '$''{'lt_cv_archive_cmds_need_lc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else $rm conftest* echo 'static int dummy;' > conftest.$ac_ext if { (eval echo configure:4766: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$lt_cv_prog_cc_wl compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest save_allow_undefined_flag=$allow_undefined_flag allow_undefined_flag= if { (eval echo configure:4779: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\") 1>&5; (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5; } then lt_cv_archive_cmds_need_lc=no else lt_cv_archive_cmds_need_lc=yes fi allow_undefined_flag=$save_allow_undefined_flag else cat conftest.err 1>&5 fi fi echo "$ac_t""$lt_cv_archive_cmds_need_lc" 1>&6 ;; esac fi need_lc=${lt_cv_archive_cmds_need_lc-yes} # The second clause should only fire when bootstrapping the # libtool distribution, otherwise you forgot to ship ltmain.sh # with your package, and you will get complaints that there are # no rules to generate ltmain.sh. if test -f "$ltmain"; then : else # If there is no Makefile yet, we rely on a make rule to execute # `config.status --recheck' to rerun these tests and create the # libtool script then. test -f Makefile && make "$ltmain" fi if test -f "$ltmain"; then trap "$rm \"${ofile}T\"; exit 1" 1 2 15 $rm -f "${ofile}T" echo creating $ofile # Now quote all the things that may contain metacharacters while being # careful not to overquote the AC_SUBSTed values. We take copies of the # variables and quote the copies for generation of the libtool script. for var in echo old_CC old_CFLAGS \ AR AR_FLAGS CC LD LN_S NM SHELL \ reload_flag reload_cmds wl \ pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \ thread_safe_flag_spec whole_archive_flag_spec libname_spec \ library_names_spec soname_spec \ RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \ old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \ postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \ old_striplib striplib file_magic_cmd export_symbols_cmds \ deplibs_check_method allow_undefined_flag no_undefined_flag \ finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \ global_symbol_to_c_name_address \ hardcode_libdir_flag_spec hardcode_libdir_separator \ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do case $var in reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \ old_postinstall_cmds | old_postuninstall_cmds | \ export_symbols_cmds | archive_cmds | archive_expsym_cmds | \ extract_expsyms_cmds | old_archive_from_expsyms_cmds | \ postinstall_cmds | postuninstall_cmds | \ finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) # Double-quote double-evaled strings. eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ;; *) eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" ;; esac done cat <<__EOF__ > "${ofile}T" #! $SHELL # `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. # Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) # NOTE: Changes made to this file will be lost: look at ltmain.sh. # # Copyright (C) 1996-2000 Free Software Foundation, Inc. # Originally by Gordon Matzigkeit , 1996 # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Sed that helps us avoid accidentally triggering echo(1) options like -n. Xsed="sed -e s/^X//" # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi # ### BEGIN LIBTOOL CONFIG # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # Shell to use when invoking shell scripts. SHELL=$lt_SHELL # Whether or not to build shared libraries. build_libtool_libs=$enable_shared # Whether or not to build static libraries. build_old_libs=$enable_static # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$need_lc # Whether or not to optimize for fast installation. fast_install=$enable_fast_install # The host system. host_alias=$host_alias host=$host # An echo program that does not interpret backslashes. echo=$lt_echo # The archiver. AR=$lt_AR AR_FLAGS=$lt_AR_FLAGS # The default C compiler. CC=$lt_CC # Is the compiler the GNU C compiler? with_gcc=$GCC # The linker used to build libraries. LD=$lt_LD # Whether we need hard or soft links. LN_S=$lt_LN_S # A BSD-compatible nm program. NM=$lt_NM # A symbol stripping program STRIP=$STRIP # Used to examine libraries when file_magic_cmd begins "file" MAGIC_CMD=$MAGIC_CMD # Used on cygwin: DLL creation program. DLLTOOL="$DLLTOOL" # Used on cygwin: object dumper. OBJDUMP="$OBJDUMP" # Used on cygwin: assembler. AS="$AS" # The name of the directory that contains temporary libtool files. objdir=$objdir # How to create reloadable object files. reload_flag=$lt_reload_flag reload_cmds=$lt_reload_cmds # How to pass a linker flag through the compiler. wl=$lt_wl # Object file suffix (normally "o"). objext="$ac_objext" # Old archive suffix (normally "a"). libext="$libext" # Executable file suffix (normally ""). exeext="$exeext" # Additional compiler flags for building library objects. pic_flag=$lt_pic_flag pic_mode=$pic_mode # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_compiler_c_o # Can we write directly to a .lo ? compiler_o_lo=$lt_compiler_o_lo # Must we lock files when doing compilation ? need_locks=$lt_need_locks # Do we need the lib prefix for modules? need_lib_prefix=$need_lib_prefix # Do we need a version for libraries? need_version=$need_version # Whether dlopen is supported. dlopen_support=$enable_dlopen # Whether dlopen of programs is supported. dlopen_self=$enable_dlopen_self # Whether dlopen of statically linked programs is supported. dlopen_self_static=$enable_dlopen_self_static # Compiler flag to prevent dynamic linking. link_static_flag=$lt_link_static_flag # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_no_builtin_flag # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$lt_export_dynamic_flag_spec # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$lt_whole_archive_flag_spec # Compiler flag to generate thread-safe objects. thread_safe_flag_spec=$lt_thread_safe_flag_spec # Library versioning type. version_type=$version_type # Format of library name prefix. libname_spec=$lt_libname_spec # List of archive names. First name is the real one, the rest are links. # The last name is the one that the linker finds with -lNAME. library_names_spec=$lt_library_names_spec # The coded name of the library, if different from the real name. soname_spec=$lt_soname_spec # Commands used to build and install an old-style archive. RANLIB=$lt_RANLIB old_archive_cmds=$lt_old_archive_cmds old_postinstall_cmds=$lt_old_postinstall_cmds old_postuninstall_cmds=$lt_old_postuninstall_cmds # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$lt_old_archive_from_new_cmds # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds # Commands used to build and install a shared archive. archive_cmds=$lt_archive_cmds archive_expsym_cmds=$lt_archive_expsym_cmds postinstall_cmds=$lt_postinstall_cmds postuninstall_cmds=$lt_postuninstall_cmds # Commands to strip libraries. old_striplib=$lt_old_striplib striplib=$lt_striplib # Method to check whether dependent libraries are shared objects. deplibs_check_method=$lt_deplibs_check_method # Command to use when deplibs_check_method == file_magic. file_magic_cmd=$lt_file_magic_cmd # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$lt_allow_undefined_flag # Flag that forces no undefined symbols. no_undefined_flag=$lt_no_undefined_flag # Commands used to finish a libtool library installation in a directory. finish_cmds=$lt_finish_cmds # Same as above, but a single script fragment to be evaled but not shown. finish_eval=$lt_finish_eval # Take the output of nm and produce a listing of raw symbols and C names. global_symbol_pipe=$lt_global_symbol_pipe # Transform the output of nm in a proper C declaration global_symbol_to_cdecl=$lt_global_symbol_to_cdecl # Transform the output of nm in a C name address pair global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address # This is the shared library runtime path variable. runpath_var=$runpath_var # This is the shared library path variable. shlibpath_var=$shlibpath_var # Is shlibpath searched before the hard-coded library search path? shlibpath_overrides_runpath=$shlibpath_overrides_runpath # How to hardcode a shared library path into an executable. hardcode_action=$hardcode_action # Whether we should hardcode library paths into libraries. hardcode_into_libs=$hardcode_into_libs # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator # Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the # resulting binary. hardcode_direct=$hardcode_direct # Set to yes if using the -LDIR flag during linking hardcodes DIR into the # resulting binary. hardcode_minus_L=$hardcode_minus_L # Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into # the resulting binary. hardcode_shlibpath_var=$hardcode_shlibpath_var # Variables whose values should be saved in libtool wrapper scripts and # restored at relink time. variables_saved_for_relink="$variables_saved_for_relink" # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs # Compile-time system search path for libraries sys_lib_search_path_spec=$lt_sys_lib_search_path_spec # Run-time system search path for libraries sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec # Fix the shell variable \$srcfile for the compiler. fix_srcfile_path="$fix_srcfile_path" # Set to yes if exported symbols are required. always_export_symbols=$always_export_symbols # The commands to list exported symbols. export_symbols_cmds=$lt_export_symbols_cmds # The commands to extract the exported symbol list from a shared archive. extract_expsyms_cmds=$lt_extract_expsyms_cmds # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$lt_exclude_expsyms # Symbols that must always be exported. include_expsyms=$lt_include_expsyms # ### END LIBTOOL CONFIG __EOF__ case $host_os in aix3*) cat <<\EOF >> "${ofile}T" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi EOF ;; esac case $host_os in cygwin* | mingw* | pw32* | os2*) cat <<'EOF' >> "${ofile}T" # This is a source program that is used to create dlls on Windows # Don't remove nor modify the starting and closing comments # /* ltdll.c starts here */ # #define WIN32_LEAN_AND_MEAN # #include # #undef WIN32_LEAN_AND_MEAN # #include # # #ifndef __CYGWIN__ # # ifdef __CYGWIN32__ # # define __CYGWIN__ __CYGWIN32__ # # endif # #endif # # #ifdef __cplusplus # extern "C" { # #endif # BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); # #ifdef __cplusplus # } # #endif # # #ifdef __CYGWIN__ # #include # DECLARE_CYGWIN_DLL( DllMain ); # #endif # HINSTANCE __hDllInstance_base; # # BOOL APIENTRY # DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) # { # __hDllInstance_base = hInst; # return TRUE; # } # /* ltdll.c ends here */ # This is a source program that is used to create import libraries # on Windows for dlls which lack them. Don't remove nor modify the # starting and closing comments # /* impgen.c starts here */ # /* Copyright (C) 1999-2000 Free Software Foundation, Inc. # # This file is part of GNU libtool. # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # */ # # #include /* for printf() */ # #include /* for open(), lseek(), read() */ # #include /* for O_RDONLY, O_BINARY */ # #include /* for strdup() */ # # /* O_BINARY isn't required (or even defined sometimes) under Unix */ # #ifndef O_BINARY # #define O_BINARY 0 # #endif # # static unsigned int # pe_get16 (fd, offset) # int fd; # int offset; # { # unsigned char b[2]; # lseek (fd, offset, SEEK_SET); # read (fd, b, 2); # return b[0] + (b[1]<<8); # } # # static unsigned int # pe_get32 (fd, offset) # int fd; # int offset; # { # unsigned char b[4]; # lseek (fd, offset, SEEK_SET); # read (fd, b, 4); # return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); # } # # static unsigned int # pe_as32 (ptr) # void *ptr; # { # unsigned char *b = ptr; # return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); # } # # int # main (argc, argv) # int argc; # char *argv[]; # { # int dll; # unsigned long pe_header_offset, opthdr_ofs, num_entries, i; # unsigned long export_rva, export_size, nsections, secptr, expptr; # unsigned long name_rvas, nexp; # unsigned char *expdata, *erva; # char *filename, *dll_name; # # filename = argv[1]; # # dll = open(filename, O_RDONLY|O_BINARY); # if (dll < 1) # return 1; # # dll_name = filename; # # for (i=0; filename[i]; i++) # if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') # dll_name = filename + i +1; # # pe_header_offset = pe_get32 (dll, 0x3c); # opthdr_ofs = pe_header_offset + 4 + 20; # num_entries = pe_get32 (dll, opthdr_ofs + 92); # # if (num_entries < 1) /* no exports */ # return 1; # # export_rva = pe_get32 (dll, opthdr_ofs + 96); # export_size = pe_get32 (dll, opthdr_ofs + 100); # nsections = pe_get16 (dll, pe_header_offset + 4 +2); # secptr = (pe_header_offset + 4 + 20 + # pe_get16 (dll, pe_header_offset + 4 + 16)); # # expptr = 0; # for (i = 0; i < nsections; i++) # { # char sname[8]; # unsigned long secptr1 = secptr + 40 * i; # unsigned long vaddr = pe_get32 (dll, secptr1 + 12); # unsigned long vsize = pe_get32 (dll, secptr1 + 16); # unsigned long fptr = pe_get32 (dll, secptr1 + 20); # lseek(dll, secptr1, SEEK_SET); # read(dll, sname, 8); # if (vaddr <= export_rva && vaddr+vsize > export_rva) # { # expptr = fptr + (export_rva - vaddr); # if (export_rva + export_size > vaddr + vsize) # export_size = vsize - (export_rva - vaddr); # break; # } # } # # expdata = (unsigned char*)malloc(export_size); # lseek (dll, expptr, SEEK_SET); # read (dll, expdata, export_size); # erva = expdata - export_rva; # # nexp = pe_as32 (expdata+24); # name_rvas = pe_as32 (expdata+32); # # printf ("EXPORTS\n"); # for (i = 0; i> "${ofile}T" || (rm -f "${ofile}T"; exit 1) mv -f "${ofile}T" "$ofile" || \ (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T") chmod +x "$ofile" fi # This can be used to rebuild libtool when needed LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' # Prevent multiple expansion echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 echo "configure:5361: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftestmake <<\EOF all: @echo 'ac_maketemp="${MAKE}"' EOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` if test -n "$ac_maketemp"; then eval ac_cv_prog_make_${ac_make}_set=yes else eval ac_cv_prog_make_${ac_make}_set=no fi rm -f conftestmake fi if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then echo "$ac_t""yes" 1>&6 SET_MAKE= else echo "$ac_t""no" 1>&6 SET_MAKE="MAKE=${MAKE-make}" fi # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 echo "configure:5399: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" for ac_dir in $PATH; do # Account for people who put trailing slashes in PATH elements. case "$ac_dir/" in /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do if test -f $ac_dir/$ac_prog; then if test $ac_prog = install && grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : else ac_cv_path_install="$ac_dir/$ac_prog -c" break 2 fi fi done ;; esac done IFS="$ac_save_IFS" fi if test "${ac_cv_path_install+set}" = set; then INSTALL="$ac_cv_path_install" else # As a last resort, use the slow shell script. We don't cache a # path for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the path is relative. INSTALL="$ac_install_sh" fi fi echo "$ac_t""$INSTALL" 1>&6 # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo "$INSTALL" | egrep "^\./" 2>&1 > /dev/null && { INSTALL="$PWDD/install-sh" } INSTALL_DIR="$INSTALL -d" case $host in *cygwin*) cat >> confdefs.h <<\EOF #define _CYGWIN_ 1 EOF ;; esac # test, whether the compiler understands the -pipe command # (thanks to Tatu Illonen: ssh/configure.in) CC_NOPIPE="$CC" if test -z "$GCC_NO_PIPE" -a -n "$GCC"; then echo $ac_n "checking if the compiler understands -pipe""... $ac_c" 1>&6 echo "configure:5475: checking if the compiler understands -pipe" >&5 CC="$CC -pipe" cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* echo "$ac_t""yes" 1>&6 else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* CC="$CC_NOPIPE" echo "$ac_t""no" 1>&6 fi rm -f conftest* fi # Extract the first word of "nessus-config", so it can be a program name with args. set dummy nessus-config; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:5505: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_NESSUSCONFIG'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else case "$NESSUSCONFIG" in /*) ac_cv_path_NESSUSCONFIG="$NESSUSCONFIG" # Let the user override the test with a path. ;; ?:/*) ac_cv_path_NESSUSCONFIG="$NESSUSCONFIG" # Let the user override the test with a dos path. ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_NESSUSCONFIG="$ac_dir/$ac_word" break fi done IFS="$ac_save_ifs" ;; esac fi NESSUSCONFIG="$ac_cv_path_NESSUSCONFIG" if test -n "$NESSUSCONFIG"; then echo "$ac_t""$NESSUSCONFIG" 1>&6 else echo "$ac_t""no" 1>&6 fi test "x$NESSUSCONFIG" = x && { echo "configure: error: "" "" "*** nessus-libraries is not installed ! You need to install it before you" "compile libnasl." "Get it at ftp://ftp.nessus.org/pub/nessus/"" 1>&2; exit 1; } XFLAGS="$CFLAGS" CPPFLAGS=`$NESSUSCONFIG --cflags` for ac_hdr in openssl/md2.h openssl/md4.h openssl/md5.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 echo "configure:5551: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:5561: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_$ac_safe=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` cat >> confdefs.h <&6 fi done CPPFLAGS="$XFLAGS" # Extract the first word of "bison", so it can be a program name with args. set dummy bison; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:5596: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_BISON'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else case "$BISON" in /*) ac_cv_path_BISON="$BISON" # Let the user override the test with a path. ;; ?:/*) ac_cv_path_BISON="$BISON" # Let the user override the test with a dos path. ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_BISON="$ac_dir/$ac_word" break fi done IFS="$ac_save_ifs" ;; esac fi BISON="$ac_cv_path_BISON" if test -n "$BISON"; then echo "$ac_t""$BISON" 1>&6 else echo "$ac_t""no" 1>&6 fi test "x$BISON" = "x" && { echo "configure: error: "" "" "*** bison is not installed on this host ! You need to install it before you" "compile libnasl" "Get it at ftp://ftp.gnu.org/pub/gnu/bison/ or check your operating system" "packages"" 1>&2; exit 1; } echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 echo "configure:5637: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include #include #include EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:5650: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* ac_cv_header_stdc=yes else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_header_stdc=no fi rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext < EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "memchr" >/dev/null 2>&1; then : else rm -rf conftest* ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext < EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "free" >/dev/null 2>&1; then : else rm -rf conftest* ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext < #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') #define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF if { (eval echo configure:5717: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* ac_cv_header_stdc=no fi rm -fr conftest* fi fi fi echo "$ac_t""$ac_cv_header_stdc" 1>&6 if test $ac_cv_header_stdc = yes; then cat >> confdefs.h <<\EOF #define STDC_HEADERS 1 EOF fi echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6 echo "configure:5741: checking for sys/wait.h that is POSIX.1 compatible" >&5 if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include #ifndef WEXITSTATUS #define WEXITSTATUS(stat_val) ((unsigned)(stat_val) >> 8) #endif #ifndef WIFEXITED #define WIFEXITED(stat_val) (((stat_val) & 255) == 0) #endif int main() { int s; wait (&s); s = WIFEXITED (s) ? WEXITSTATUS (s) : 1; ; return 0; } EOF if { (eval echo configure:5762: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_header_sys_wait_h=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_header_sys_wait_h=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_header_sys_wait_h" 1>&6 if test $ac_cv_header_sys_wait_h = yes; then cat >> confdefs.h <<\EOF #define HAVE_SYS_WAIT_H 1 EOF fi echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6 echo "configure:5783: checking whether time.h and sys/time.h may both be included" >&5 if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include #include int main() { struct tm *tp; ; return 0; } EOF if { (eval echo configure:5797: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_header_time=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_header_time=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_header_time" 1>&6 if test $ac_cv_header_time = yes; then cat >> confdefs.h <<\EOF #define TIME_WITH_SYS_TIME 1 EOF fi ac_header_dirent=no for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6 echo "configure:5822: checking for $ac_hdr that defines DIR" >&5 if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include <$ac_hdr> int main() { DIR *dirp = 0; ; return 0; } EOF if { (eval echo configure:5835: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* eval "ac_cv_header_dirent_$ac_safe=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_dirent_$ac_safe=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_dirent_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` cat >> confdefs.h <&6 fi done # Two versions of opendir et al. are in -ldir and -lx on SCO Xenix. if test $ac_header_dirent = dirent.h; then echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6 echo "configure:5860: checking for opendir in -ldir" >&5 ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-ldir $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 LIBS="$LIBS -ldir" else echo "$ac_t""no" 1>&6 fi else echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6 echo "configure:5901: checking for opendir in -lx" >&5 ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lx $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 LIBS="$LIBS -lx" else echo "$ac_t""no" 1>&6 fi fi echo $ac_n "checking for -lrpcsvc""... $ac_c" 1>&6 echo "configure:5943: checking for -lrpcsvc" >&5 if eval "test \"`echo '$''{'ac_cv_lib_rpcsvc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lrpcsvc $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_lib_rpcsvc=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_lib_rpcsvc=no fi rm -f conftest* LIBS="$ac_save_LIBS" fi echo "$ac_t""$ac_cv_lib_rpcsvc" 1>&6 if test "$ac_cv_lib_rpcsvc" = yes; then rpcsvc_lib="-lrpcsvc" fi ac_safe=`echo "/usr/ucbinclude/fcntl.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for /usr/ucbinclude/fcntl.h""... $ac_c" 1>&6 echo "configure:5977: checking for /usr/ucbinclude/fcntl.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:5987: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_$ac_safe=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 have_ucbinclude="-DHAVE_UCBINCLUDE" else echo "$ac_t""no" 1>&6 fi for ac_hdr in unistd.h getopt.h string.h strings.h sys/sockio.h sys/socketio.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 echo "configure:6012: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:6022: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_$ac_safe=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` cat >> confdefs.h <&6 fi done for ac_hdr in netinet/in.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 echo "configure:6053: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:6063: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_$ac_safe=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` cat >> confdefs.h <&6 fi done for ac_hdr in netinet/in_systm.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 echo "configure:6093: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:6103: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_$ac_safe=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` cat >> confdefs.h <&6 fi done for ac_hdr in netinet/ip.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 echo "configure:6133: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:6143: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_$ac_safe=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` cat >> confdefs.h <&6 fi done for ac_hdr in netinet/ip_icmp.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 echo "configure:6173: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:6183: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_$ac_safe=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` cat >> confdefs.h <&6 fi done for ac_hdr in netinet/ip.h netinet/udp.h netinet/protocols.h netinet/ip_udp.h netinet/ip_tcp.h netinet/tcpip.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 echo "configure:6213: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:6223: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_$ac_safe=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` cat >> confdefs.h <&6 fi done for ac_hdr in sys/param.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 echo "configure:6254: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:6264: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_$ac_safe=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` cat >> confdefs.h <&6 fi done for ac_hdr in sys/ioctl.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 echo "configure:6294: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:6304: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_$ac_safe=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` cat >> confdefs.h <&6 fi done for ac_hdr in rpc/rpc.h dlfcn.h sys/un.h memory.h ctype.h errno.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 echo "configure:6334: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:6344: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_$ac_safe=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` cat >> confdefs.h <&6 fi done for ac_hdr in sys/types.h stdlib.h stdio.h pthread.h sys/filio.h pwd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 echo "configure:6374: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:6384: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_$ac_safe=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` cat >> confdefs.h <&6 fi done for ac_hdr in assert.h netdb.h netinet/in.h arpa/inet.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 echo "configure:6414: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:6424: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_$ac_safe=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` cat >> confdefs.h <&6 fi done for ac_hdr in poll.h sys/poll.h netinet/ip_tcp.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 echo "configure:6454: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:6464: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_$ac_safe=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` cat >> confdefs.h <&6 fi done for ac_hdr in sys/stat.h stat.h net/if.h sys/mman.h search.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 echo "configure:6494: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:6504: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_$ac_safe=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` cat >> confdefs.h <&6 fi done case "$host" in *-irix*) cat >> confdefs.h <<\EOF #define HAVE_SYS_SOCKET_H 1 EOF cat >> confdefs.h <<\EOF #define HAVE_NETINET_IP_H 1 EOF cat >> confdefs.h <<\EOF #define HAVE_NETINET_TCP_H 1 EOF ;; *) for ac_hdr in sys/socket.h netinet/ip.h netinet/tcp.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 echo "configure:6552: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:6562: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_$ac_safe=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` cat >> confdefs.h <&6 fi done ;; esac # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 echo "configure:6596: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF if { (eval echo configure:6608: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_header_alloca_h=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_header_alloca_h" 1>&6 if test $ac_cv_header_alloca_h = yes; then cat >> confdefs.h <<\EOF #define HAVE_ALLOCA_H 1 EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 echo "configure:6629: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < # define alloca _alloca # else # if HAVE_ALLOCA_H # include # else # ifdef _AIX #pragma alloca # else # ifndef alloca /* predefined by HP cc +Olibcalls */ char *alloca (); # endif # endif # endif # endif #endif int main() { char *p = (char *) alloca(1); ; return 0; } EOF if { (eval echo configure:6662: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_func_alloca_works=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_func_alloca_works" 1>&6 if test $ac_cv_func_alloca_works = yes; then cat >> confdefs.h <<\EOF #define HAVE_ALLOCA 1 EOF fi if test $ac_cv_func_alloca_works = no; then # The SVR3 libPW and SVR4 libucb both contain incompatible functions # that cause trouble. Some versions do not even contain alloca or # contain a buggy version. If you still want to use their alloca, # use ar to extract alloca.o from them instead of compiling alloca.c. ALLOCA=alloca.${ac_objext} cat >> confdefs.h <<\EOF #define C_ALLOCA 1 EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 echo "configure:6694: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5 | egrep "webecray" >/dev/null 2>&1; then rm -rf conftest* ac_cv_os_cray=yes else rm -rf conftest* ac_cv_os_cray=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_os_cray" 1>&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo "configure:6724: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else $ac_func(); #endif ; return 0; } EOF if { (eval echo configure:6752: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_$ac_func=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then echo "$ac_t""yes" 1>&6 cat >> confdefs.h <&6 fi done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 echo "configure:6779: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$cross_compiling" = yes; then ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext < addr) ? 1 : -1; } main () { exit (find_stack_direction() < 0); } EOF if { (eval echo configure:6806: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* ac_cv_c_stack_direction=-1 fi rm -fr conftest* fi fi echo "$ac_t""$ac_cv_c_stack_direction" 1>&6 cat >> confdefs.h <&6 echo "configure:6830: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else $ac_func(); #endif ; return 0; } EOF if { (eval echo configure:6858: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_$ac_func=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` cat >> confdefs.h <&6 fi done for ac_func in strchr memcpy select poll do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo "configure:6885: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else $ac_func(); #endif ; return 0; } EOF if { (eval echo configure:6913: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_$ac_func=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` cat >> confdefs.h <&6 fi done echo $ac_n "checking for vsnprintf""... $ac_c" 1>&6 echo "configure:6938: checking for vsnprintf" >&5 if eval "test \"`echo '$''{'ac_cv_func_vsnprintf'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char vsnprintf(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_vsnprintf) || defined (__stub___vsnprintf) choke me #else vsnprintf(); #endif ; return 0; } EOF if { (eval echo configure:6966: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_vsnprintf=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_vsnprintf=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'vsnprintf`\" = yes"; then echo "$ac_t""yes" 1>&6 cat >> confdefs.h <<\EOF #define HAVE_VSNPRINTF 1 EOF else echo "$ac_t""no" 1>&6 fi echo $ac_n "checking for memmem""... $ac_c" 1>&6 echo "configure:6989: checking for memmem" >&5 if eval "test \"`echo '$''{'ac_cv_func_memmem'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char memmem(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_memmem) || defined (__stub___memmem) choke me #else memmem(); #endif ; return 0; } EOF if { (eval echo configure:7017: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_memmem=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_memmem=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'memmem`\" = yes"; then echo "$ac_t""yes" 1>&6 cat >> confdefs.h <<\EOF #define HAVE_MEMMEM 1 EOF else echo "$ac_t""no" 1>&6 fi for ac_func in bzero bcopy do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo "configure:7042: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else $ac_func(); #endif ; return 0; } EOF if { (eval echo configure:7070: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_$ac_func=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` cat >> confdefs.h <&6 fi done for ac_func in addr2ascii inet_neta do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo "configure:7097: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else $ac_func(); #endif ; return 0; } EOF if { (eval echo configure:7125: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_$ac_func=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` cat >> confdefs.h <&6 fi done for ac_func in signal sigaction wait wait3 wait4 waitpid do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo "configure:7152: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else $ac_func(); #endif ; return 0; } EOF if { (eval echo configure:7180: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_$ac_func=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` cat >> confdefs.h <&6 fi done for ac_func in lfind do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo "configure:7208: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else $ac_func(); #endif ; return 0; } EOF if { (eval echo configure:7236: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_$ac_func=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` cat >> confdefs.h <&6 fi done echo $ac_n "checking for lfind in -lcompat""... $ac_c" 1>&6 echo "configure:7261: checking for lfind in -lcompat" >&5 ac_lib_var=`echo compat'_'lfind | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lcompat $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 compat_lib="-lcompat" else echo "$ac_t""no" 1>&6 fi test -n "$compat_lib" && cat >> confdefs.h <<\EOF #define HAVE_LFIND 1 EOF echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6 echo "configure:7308: checking whether byte ordering is bigendian" >&5 if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_bigendian=unknown # See if sys/param.h defines the BYTE_ORDER macro. cat > conftest.$ac_ext < #include int main() { #if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN bogus endian macros #endif ; return 0; } EOF if { (eval echo configure:7326: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* # It does; now see whether it defined to BIG_ENDIAN or not. cat > conftest.$ac_ext < #include int main() { #if BYTE_ORDER != BIG_ENDIAN not big endian #endif ; return 0; } EOF if { (eval echo configure:7341: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_bigendian=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_c_bigendian=no fi rm -f conftest* else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* if test $ac_cv_c_bigendian = unknown; then if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_bigendian=no else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* ac_cv_c_bigendian=yes fi rm -fr conftest* fi fi fi echo "$ac_t""$ac_cv_c_bigendian" 1>&6 if test $ac_cv_c_bigendian = yes; then cat >> confdefs.h <<\EOF #define WORDS_BIGENDIAN 1 EOF fi echo $ac_n "checking for time_t""... $ac_c" 1>&6 echo "configure:7398: checking for time_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_time_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS #include #include #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "(^|[^a-zA-Z_0-9])time_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_time_t=yes else rm -rf conftest* ac_cv_type_time_t=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_type_time_t" 1>&6 if test $ac_cv_type_time_t = no; then cat >> confdefs.h <<\EOF #define time_t int EOF fi echo $ac_n "checking for pid_t""... $ac_c" 1>&6 echo "configure:7431: checking for pid_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS #include #include #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "(^|[^a-zA-Z_0-9])pid_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_pid_t=yes else rm -rf conftest* ac_cv_type_pid_t=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_type_pid_t" 1>&6 if test $ac_cv_type_pid_t = no; then cat >> confdefs.h <<\EOF #define pid_t int EOF fi echo $ac_n "checking for size_t""... $ac_c" 1>&6 echo "configure:7464: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS #include #include #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_size_t=yes else rm -rf conftest* ac_cv_type_size_t=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_type_size_t" 1>&6 if test $ac_cv_type_size_t = no; then cat >> confdefs.h <<\EOF #define size_t unsigned EOF fi echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6 echo "configure:7497: checking for uid_t in sys/types.h" >&5 if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "uid_t" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_uid_t=yes else rm -rf conftest* ac_cv_type_uid_t=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_type_uid_t" 1>&6 if test $ac_cv_type_uid_t = no; then cat >> confdefs.h <<\EOF #define uid_t int EOF cat >> confdefs.h <<\EOF #define gid_t int EOF fi echo $ac_n "checking size of short""... $ac_c" 1>&6 echo "configure:7531: checking size of short" >&5 if eval "test \"`echo '$''{'ac_cv_sizeof_short'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; ac_cv_sizeof_short=2; } else cat > conftest.$ac_ext < main() { FILE *f=fopen("conftestval", "w"); if (!f) exit(1); fprintf(f, "%d\n", sizeof(short)); exit(0); } EOF if { (eval echo configure:7550: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_sizeof_short=`cat conftestval` else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* ac_cv_sizeof_short=0 fi rm -fr conftest* fi fi echo "$ac_t""$ac_cv_sizeof_short" 1>&6 cat >> confdefs.h <&6 echo "configure:7570: checking size of int" >&5 if eval "test \"`echo '$''{'ac_cv_sizeof_int'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; ac_cv_sizeof_int=4; } else cat > conftest.$ac_ext < main() { FILE *f=fopen("conftestval", "w"); if (!f) exit(1); fprintf(f, "%d\n", sizeof(int)); exit(0); } EOF if { (eval echo configure:7589: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_sizeof_int=`cat conftestval` else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* ac_cv_sizeof_int=0 fi rm -fr conftest* fi fi echo "$ac_t""$ac_cv_sizeof_int" 1>&6 cat >> confdefs.h <&6 echo "configure:7609: checking size of long" >&5 if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; ac_cv_sizeof_long=4; } else cat > conftest.$ac_ext < main() { FILE *f=fopen("conftestval", "w"); if (!f) exit(1); fprintf(f, "%d\n", sizeof(long)); exit(0); } EOF if { (eval echo configure:7628: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_sizeof_long=`cat conftestval` else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* ac_cv_sizeof_long=0 fi rm -fr conftest* fi fi echo "$ac_t""$ac_cv_sizeof_long" 1>&6 cat >> confdefs.h <&6 echo "configure:7650: checking struct ip contains ip_csum" >&5 cat > conftest.$ac_ext < #include #include #include int main() { struct ip ip; ip.ip_csum = 0; ; return 0; } EOF if { (eval echo configure:7670: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* echo "$ac_t""yes" 1>&6; cat >> confdefs.h <<\EOF #define HAVE_STRUCT_IP_CSUM 1 EOF else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* echo "$ac_t""no" 1>&6; fi rm -f conftest* echo $ac_n "checking struct ip""... $ac_c" 1>&6 echo "configure:7685: checking struct ip" >&5 cat > conftest.$ac_ext < #include #include #include int main() { struct ip ip; ; return 0; } EOF if { (eval echo configure:7697: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* echo "$ac_t""yes" 1>&6; cat >> confdefs.h <<\EOF #define HAVE_STRUCT_IP 1 EOF else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* echo "$ac_t""no" 1>&6 fi rm -f conftest* echo $ac_n "checking struct ip has ip_hl""... $ac_c" 1>&6 echo "configure:7712: checking struct ip has ip_hl" >&5 cat > conftest.$ac_ext < #include #include #include int main() { struct ip ip;ip.ip_hl = 1 ; return 0; } EOF if { (eval echo configure:7724: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* echo "$ac_t""yes" 1>&6; cat >> confdefs.h <<\EOF #define HAVE_IP_HL 1 EOF else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* echo "$ac_t""no" 1>&6 fi rm -f conftest* echo $ac_n "checking struct icmp""... $ac_c" 1>&6 echo "configure:7741: checking struct icmp" >&5 cat > conftest.$ac_ext < #include #include #include #include int main() { struct icmp icmp; ; return 0; } EOF if { (eval echo configure:7754: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* echo "$ac_t""yes" 1>&6; cat >> confdefs.h <<\EOF #define HAVE_STRUCT_ICMP 1 EOF else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* echo "$ac_t""no" 1>&6 fi rm -f conftest* echo $ac_n "checking struct udphdr""... $ac_c" 1>&6 echo "configure:7769: checking struct udphdr" >&5 cat > conftest.$ac_ext < #include #include #include #include int main() { struct udphdr udp; ; return 0; } EOF if { (eval echo configure:7782: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* echo "$ac_t""yes" 1>&6; cat >> confdefs.h <<\EOF #define HAVE_STRUCT_UDPHDR 1 EOF else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* echo "$ac_t""no" 1>&6 fi rm -f conftest* echo $ac_n "checking BSD struct udphdr""... $ac_c" 1>&6 echo "configure:7797: checking BSD struct udphdr" >&5 cat > conftest.$ac_ext < #include #include #include #include int main() { struct udphdr udp;udp.uh_dport = 0; ; return 0; } EOF if { (eval echo configure:7815: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* echo "$ac_t""yes" 1>&6; cat >> confdefs.h <<\EOF #define HAVE_BSD_STRUCT_UDPHDR 1 EOF else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* echo "$ac_t""no" 1>&6 fi rm -f conftest* echo $ac_n "checking struct tcphdr""... $ac_c" 1>&6 echo "configure:7831: checking struct tcphdr" >&5 cat > conftest.$ac_ext < #include #include #include #include int main() { struct tcphdr tcp; ; return 0; } EOF if { (eval echo configure:7844: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* echo "$ac_t""yes" 1>&6; cat >> confdefs.h <<\EOF #define HAVE_STRUCT_TCPHDR 1 EOF else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* echo "$ac_t""no" 1>&6 fi rm -f conftest* echo $ac_n "checking struct tcphdr has th_off""... $ac_c" 1>&6 echo "configure:7859: checking struct tcphdr has th_off" >&5 cat > conftest.$ac_ext < #ifdef __linux__ #define __FAVOR_BSD #endif #include #include #include #include int main() { struct tcphdr tcp;tcp.th_off = 0; ; return 0; } EOF if { (eval echo configure:7875: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* echo "$ac_t""yes" 1>&6; cat >> confdefs.h <<\EOF #define HAVE_TCPHDR_TH_OFF 1 EOF else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* echo "$ac_t""no" 1>&6 fi rm -f conftest* echo $ac_n "checking struct tcphdr has th_x2_off""... $ac_c" 1>&6 echo "configure:7890: checking struct tcphdr has th_x2_off" >&5 cat > conftest.$ac_ext < #ifdef __linux__ #define __FAVOR_BSD #endif #include #include #include #include int main() { struct tcphdr tcp;tcp.th_x2_off = 0; ; return 0; } EOF if { (eval echo configure:7906: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* echo "$ac_t""yes" 1>&6; cat >> confdefs.h <<\EOF #define HAVE_TCPHDR_TH_X2_OFF 1 EOF else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* echo "$ac_t""no" 1>&6 fi rm -f conftest* echo $ac_n "checking for long file names""... $ac_c" 1>&6 echo "configure:7921: checking for long file names" >&5 if eval "test \"`echo '$''{'ac_cv_sys_long_file_names'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_sys_long_file_names=yes # Test for long file names in all the places we know might matter: # . the current directory, where building will happen # $prefix/lib where we will be installing things # $exec_prefix/lib likewise # eval it to expand exec_prefix. # $TMPDIR if set, where it might want to write temporary files # if $TMPDIR is not set: # /tmp where it might want to write temporary files # /var/tmp likewise # /usr/tmp likewise if test -n "$TMPDIR" && test -d "$TMPDIR" && test -w "$TMPDIR"; then ac_tmpdirs="$TMPDIR" else ac_tmpdirs='/tmp /var/tmp /usr/tmp' fi for ac_dir in . $ac_tmpdirs `eval echo $prefix/lib $exec_prefix/lib` ; do test -d $ac_dir || continue test -w $ac_dir || continue # It is less confusing to not echo anything here. (echo 1 > $ac_dir/conftest9012345) 2>/dev/null (echo 2 > $ac_dir/conftest9012346) 2>/dev/null val=`cat $ac_dir/conftest9012345 2>/dev/null` if test ! -f $ac_dir/conftest9012345 || test "$val" != 1; then ac_cv_sys_long_file_names=no rm -f $ac_dir/conftest9012345 $ac_dir/conftest9012346 2>/dev/null break fi rm -f $ac_dir/conftest9012345 $ac_dir/conftest9012346 2>/dev/null done fi echo "$ac_t""$ac_cv_sys_long_file_names" 1>&6 if test $ac_cv_sys_long_file_names = yes; then cat >> confdefs.h <<\EOF #define HAVE_LONG_FILE_NAMES 1 EOF fi echo $ac_n "checking for inet_aton in -lc""... $ac_c" 1>&6 echo "configure:7967: checking for inet_aton in -lc" >&5 ac_lib_var=`echo c'_'inet_aton | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lc $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 cat >> confdefs.h <<\EOF #define HAVE_INET_ATON 1 EOF else echo "$ac_t""no" 1>&6 fi echo $ac_n "checking for inet_aton in -lresolv""... $ac_c" 1>&6 echo "configure:8010: checking for inet_aton in -lresolv" >&5 ac_lib_var=`echo resolv'_'inet_aton | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lresolv $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 cat >> confdefs.h <<\EOF #define HAVE_INET_ATON 1 EOF else echo "$ac_t""no" 1>&6 fi if test "`uname`" != "IRIX" ; then echo $ac_n "checking for inet_aton in -lsocket""... $ac_c" 1>&6 echo "configure:8056: checking for inet_aton in -lsocket" >&5 ac_lib_var=`echo socket'_'inet_aton | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lsocket $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 cat >> confdefs.h <<\EOF #define HAVE_INET_ATON 1 EOF else echo "$ac_t""no" 1>&6 fi echo $ac_n "checking for inet_aton in -lnsl""... $ac_c" 1>&6 echo "configure:8099: checking for inet_aton in -lnsl" >&5 ac_lib_var=`echo nsl'_'inet_aton | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lnsl $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 cat >> confdefs.h <<\EOF #define HAVE_INET_ATON 1 EOF else echo "$ac_t""no" 1>&6 fi fi echo $ac_n "checking if sockaddr{} has sa_len member""... $ac_c" 1>&6 echo "configure:8144: checking if sockaddr{} has sa_len member" >&5 if eval "test \"`echo '$''{'ac_cv_sockaddr_has_sa_len'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < # include int main() { unsigned int i = sizeof(((struct sockaddr *)0)->sa_len) ; return 0; } EOF if { (eval echo configure:8158: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_sockaddr_has_sa_len=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_sockaddr_has_sa_len=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_sockaddr_has_sa_len" 1>&6 if test $ac_cv_sockaddr_has_sa_len = yes ; then cat >> confdefs.h <<\EOF #define HAVE_SOCKADDR_SA_LEN 1 EOF fi BROKEN_REGEXP="" # # RedHat 8.0 ships with a broken regexp library (Nessus bug#90) # test -f /etc/redhat-release && { cat /etc/redhat-release | egrep "(8\.0|9)" >/dev/null && BROKEN_REGEXP=y } test -z "$BROKEN_REGEXP" && { echo $ac_n "checking for a working regexp implementation""... $ac_c" 1>&6 echo "configure:8193: checking for a working regexp implementation" >&5 if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; echo "$ac_t""yes" 1>&6;cat >> confdefs.h <<\EOF #define HAVE_REGEX_SUPPORT 1 EOF } else cat > conftest.$ac_ext < #include #include #include int main() { char fastmap[1 << 8]; struct re_pattern_buffer pb; struct re_registers regs; pb.allocated = 8; pb.buffer = malloc(8); pb.fastmap = fastmap; pb.translate = 0; re_set_syntax(RE_SYNTAX_POSIX_EGREP); re_compile_pattern(".*nessus.*", strlen(".*nessus.*"), &pb); re_compile_fastmap(&pb); return re_search(&pb, "i use nessus everyday", strlen("i use nessus everyday"), 0, strlen("i use nessus everyday"), ®s); } EOF if { (eval echo configure:8228: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then echo "$ac_t""yes" 1>&6;cat >> confdefs.h <<\EOF #define HAVE_REGEX_SUPPORT 1 EOF else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* echo "$ac_t""no" 1>&6 fi rm -fr conftest* fi } echo $ac_n "checking for a working strndup implementation""... $ac_c" 1>&6 echo "configure:8247: checking for a working strndup implementation" >&5 if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; echo "$ac_t""yes" 1>&6;cat >> confdefs.h <<\EOF #define HAVE_STRNDUP_ALREADY 1 EOF } else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then echo "$ac_t""yes" 1>&6;cat >> confdefs.h <<\EOF #define HAVE_STRNDUP_ALREADY 1 EOF else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* echo "$ac_t""no" 1>&6 fi rm -fr conftest* fi case "$host" in *-freebsd*|*-bsdi*|*-netbsd*) cat >> confdefs.h <<\EOF #define BSD_BYTE_ORDERING 1 EOF esac case "$host" in *-netbsd*) cat >> confdefs.h <<\EOF #define NETBSD 1 EOF ;; *-openbsd*) cat >> confdefs.h <<\EOF #define OPENBSD 1 EOF ;; *-sgi-irix5*) cat >> confdefs.h <<\EOF #define IRIX 1 EOF no_libsocket=yes no_libnsl=yes if test -z "$GCC"; then sgi_cc=yes fi ;; *-sgi-irix6*) cat >> confdefs.h <<\EOF #define IRIX 1 EOF no_libsocket=yes no_libnsl=yes if test -z "$GCC"; then sgi_cc=yes fi ;; *-solaris2.0*) cat >> confdefs.h <<\EOF #define STUPID_SOLARIS_CHECKSUM_BUG 1 EOF cat >> confdefs.h <<\EOF #define SOLARIS 1 EOF ;; *-solaris2.1*) cat >> confdefs.h <<\EOF #define STUPID_SOLARIS_CHECKSUM_BUG 1 EOF cat >> confdefs.h <<\EOF #define SOLARIS 1 EOF ;; *-solaris2.2*) cat >> confdefs.h <<\EOF #define STUPID_SOLARIS_CHECKSUM_BUG 1 EOF cat >> confdefs.h <<\EOF #define SOLARIS 1 EOF ;; *-solaris2.3*) cat >> confdefs.h <<\EOF #define STUPID_SOLARIS_CHECKSUM_BUG 1 EOF cat >> confdefs.h <<\EOF #define SOLARIS 1 EOF ;; *-solaris2.4*) cat >> confdefs.h <<\EOF #define STUPID_SOLARIS_CHECKSUM_BUG 1 EOF cat >> confdefs.h <<\EOF #define SOLARIS 1 EOF ;; *-solaris2.5.1) cat >> confdefs.h <<\EOF #define STUPID_SOLARIS_CHECKSUM_BUG 1 EOF cat >> confdefs.h <<\EOF #define SOLARIS 1 EOF ;; *-solaris*) cat >> confdefs.h <<\EOF #define SOLARIS 1 EOF ;; *-sunos4*) cat >> confdefs.h <<\EOF #define SUNOS 1 EOF cat >> confdefs.h <<\EOF #define SPRINTF_RETURNS_STRING 1 EOF no_libnsl=yes no_libsocket=yes ;; *-linux*) linux=yes cat >> confdefs.h <<\EOF #define LINUX 1 EOF cat >> confdefs.h <<\EOF #define PCAP_TIMEOUT_IGNORED 1 EOF # libpcap doesn't even LOOK at # the timeout you give it under Linux ;; *-freebsd*) cat >> confdefs.h <<\EOF #define FREEBSD 1 EOF ;; *-bsdi*) cat >> confdefs.h <<\EOF #define BSDI 1 EOF ;; esac OLD_CFLAGS=$CFLAGS CFLAGS="$CFLAGS `$NESSUSCONFIG --libs --cflags`" if echo $CFLAGS | grep pcap-nessus 2>&1 > /dev/null; then echo $ac_n "checking for pcap_restart in -lpcap-nessus""... $ac_c" 1>&6 echo "configure:8444: checking for pcap_restart in -lpcap-nessus" >&5 ac_lib_var=`echo pcap-nessus'_'pcap_restart | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lpcap-nessus $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 cat >> confdefs.h <<\EOF #define PCAP_RESTART pcap_restart EOF else echo "$ac_t""no" 1>&6 echo $ac_n "checking for pcap_yyrestart in -lpcap-nessus""... $ac_c" 1>&6 echo "configure:8485: checking for pcap_yyrestart in -lpcap-nessus" >&5 ac_lib_var=`echo pcap-nessus'_'pcap_yyrestart | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lpcap-nessus $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 cat >> confdefs.h <<\EOF #define PCAP_RESTART pcap_yyrestart EOF else echo "$ac_t""no" 1>&6 echo $ac_n "checking for yyrestart in -lpcap-nessus""... $ac_c" 1>&6 echo "configure:8526: checking for yyrestart in -lpcap-nessus" >&5 ac_lib_var=`echo pcap-nessus'_'yyrestart | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lpcap-nessus $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 cat >> confdefs.h <<\EOF #define PCAP_RESTART yyrestart EOF else echo "$ac_t""no" 1>&6 echo no yacc restart func found echo perhaps libpcap-nessus wasn\'t compiled with bison/flex\? fi fi fi else echo $ac_n "checking for pcap_restart in -lpcap""... $ac_c" 1>&6 echo "configure:8577: checking for pcap_restart in -lpcap" >&5 ac_lib_var=`echo pcap'_'pcap_restart | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lpcap $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 cat >> confdefs.h <<\EOF #define PCAP_RESTART pcap_restart EOF else echo "$ac_t""no" 1>&6 echo $ac_n "checking for pcap_yyrestart in -lpcap""... $ac_c" 1>&6 echo "configure:8618: checking for pcap_yyrestart in -lpcap" >&5 ac_lib_var=`echo pcap'_'pcap_yyrestart | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lpcap $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 cat >> confdefs.h <<\EOF #define PCAP_RESTART pcap_yyrestart EOF else echo "$ac_t""no" 1>&6 echo $ac_n "checking for yyrestart in -lpcap""... $ac_c" 1>&6 echo "configure:8659: checking for yyrestart in -lpcap" >&5 ac_lib_var=`echo pcap'_'yyrestart | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lpcap $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 cat >> confdefs.h <<\EOF #define PCAP_RESTART yyrestart EOF else echo "$ac_t""no" 1>&6 echo no yacc restart func found echo perhaps libpcap wasn\'t compiled with bison/flex\? fi fi fi fi CFLAGS=$OLD_CFLAGS trap '' 1 2 15 cat > confcache <<\EOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs. It is not useful on other systems. # If it contains results you don't want to keep, you may remove or edit it. # # By default, configure uses ./config.cache as the cache file, # creating it if it does not exist already. You can give configure # the --cache-file=FILE option to use a different cache file; that is # what configure does when it calls configure scripts in # subdirectories, so they share the cache. # Giving --cache-file=/dev/null disables caching, for debugging configure. # config.status only pays attention to the cache file if you give it the # --recheck option to rerun configure. # EOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, don't put newlines in cache variables' values. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | case `(ac_space=' '; set | grep ac_space) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote substitution # turns \\\\ into \\, and sed turns \\ into \). sed -n \ -e "s/'/'\\\\''/g" \ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" ;; *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' ;; esac >> confcache if cmp -s $cache_file confcache; then : else if test -w $cache_file; then echo "updating cache $cache_file" cat confcache > $cache_file else echo "not updating unwritable cache $cache_file" fi fi rm -f confcache trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' # Any assignment to VPATH causes Sun make to only execute # the first set of double-colon rules, so remove it if not needed. # If there is a colon in the path, we need to keep it. if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' fi trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 DEFS=-DHAVE_CONFIG_H # Without the "./", some shells look in PATH for config.status. : ${CONFIG_STATUS=./config.status} echo creating $CONFIG_STATUS rm -f $CONFIG_STATUS cat > $CONFIG_STATUS </dev/null | sed 1q`: # # $0 $ac_configure_args # # Compiler output produced by configure, useful for debugging # configure, is in ./config.log if it exists. ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" for ac_option do case "\$ac_option" in -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) echo "$CONFIG_STATUS generated by autoconf version 2.13" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; *) echo "\$ac_cs_usage"; exit 1 ;; esac done ac_given_srcdir=$srcdir ac_given_INSTALL="$INSTALL" trap 'rm -fr `echo "nasl.tmpl nasl-config include/config.h nasl/strutils.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 EOF cat >> $CONFIG_STATUS < conftest.subs <<\\CEOF $ac_vpsub $extrasub s%@SHELL@%$SHELL%g s%@CFLAGS@%$CFLAGS%g s%@CPPFLAGS@%$CPPFLAGS%g s%@CXXFLAGS@%$CXXFLAGS%g s%@FFLAGS@%$FFLAGS%g s%@DEFS@%$DEFS%g s%@LDFLAGS@%$LDFLAGS%g s%@LIBS@%$LIBS%g s%@exec_prefix@%$exec_prefix%g s%@prefix@%$prefix%g s%@program_transform_name@%$program_transform_name%g s%@bindir@%$bindir%g s%@sbindir@%$sbindir%g s%@libexecdir@%$libexecdir%g s%@datadir@%$datadir%g s%@sysconfdir@%$sysconfdir%g s%@sharedstatedir@%$sharedstatedir%g s%@localstatedir@%$localstatedir%g s%@libdir@%$libdir%g s%@includedir@%$includedir%g s%@oldincludedir@%$oldincludedir%g s%@infodir@%$infodir%g s%@mandir@%$mandir%g s%@CC@%$CC%g s%@host@%$host%g s%@host_alias@%$host_alias%g s%@host_cpu@%$host_cpu%g s%@host_vendor@%$host_vendor%g s%@host_os@%$host_os%g s%@build@%$build%g s%@build_alias@%$build_alias%g s%@build_cpu@%$build_cpu%g s%@build_vendor@%$build_vendor%g s%@build_os@%$build_os%g s%@LN_S@%$LN_S%g s%@OBJEXT@%$OBJEXT%g s%@EXEEXT@%$EXEEXT%g s%@ECHO@%$ECHO%g s%@RANLIB@%$RANLIB%g s%@STRIP@%$STRIP%g s%@DLLTOOL@%$DLLTOOL%g s%@AS@%$AS%g s%@OBJDUMP@%$OBJDUMP%g s%@CPP@%$CPP%g s%@LIBTOOL@%$LIBTOOL%g s%@SET_MAKE@%$SET_MAKE%g s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g s%@INSTALL_DATA@%$INSTALL_DATA%g s%@NESSUSCONFIG@%$NESSUSCONFIG%g s%@BISON@%$BISON%g s%@ALLOCA@%$ALLOCA%g s%@PWD@%$PWD%g s%@PWDD@%$PWDD%g s%@CWALL@%$CWALL%g s%@CWARN@%$CWARN%g s%@INSTALL@%$INSTALL%g s%@version@%$version%g s%@NESSUS_MAJOR@%$NESSUS_MAJOR%g s%@NESSUS_MINOR@%$NESSUS_MINOR%g s%@NESSUS_SUPER@%$NESSUS_SUPER%g s%@NESSUS_PATCH@%$NESSUS_PATCH%g s%@NESSUS_DATE@%$NESSUS_DATE%g s%@INSTALL_DIR@%$INSTALL_DIR%g s%@rpcsvc_lib@%$rpcsvc_lib%g s%@compat_lib@%$compat_lib%g s%@VERSION@%$VERSION%g s%@have_ucbinclude@%$have_ucbinclude%g CEOF EOF cat >> $CONFIG_STATUS <<\EOF # Split the substitutions into bite-sized pieces for seds with # small command number limits, like on Digital OSF/1 and HP-UX. ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. ac_file=1 # Number of current file. ac_beg=1 # First line for current file. ac_end=$ac_max_sed_cmds # Line after last line for current file. ac_more_lines=: ac_sed_cmds="" while $ac_more_lines; do if test $ac_beg -gt 1; then sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file else sed "${ac_end}q" conftest.subs > conftest.s$ac_file fi if test ! -s conftest.s$ac_file; then ac_more_lines=false rm -f conftest.s$ac_file else if test -z "$ac_sed_cmds"; then ac_sed_cmds="sed -f conftest.s$ac_file" else ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" fi ac_file=`expr $ac_file + 1` ac_beg=$ac_end ac_end=`expr $ac_end + $ac_max_sed_cmds` fi done if test -z "$ac_sed_cmds"; then ac_sed_cmds=cat fi EOF cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case "$ac_file" in *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. # Remove last slash and all that follows it. Not all systems have dirname. ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then # The file is in a subdirectory. test ! -d "$ac_dir" && mkdir "$ac_dir" ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" # A "../" for each directory in $ac_dir_suffix. ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` else ac_dir_suffix= ac_dots= fi case "$ac_given_srcdir" in .) srcdir=. if test -z "$ac_dots"; then top_srcdir=. else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; *) # Relative path. srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" top_srcdir="$ac_dots$ac_given_srcdir" ;; esac case "$ac_given_INSTALL" in [/$]*) INSTALL="$ac_given_INSTALL" ;; *) INSTALL="$ac_dots$ac_given_INSTALL" ;; esac echo creating "$ac_file" rm -f "$ac_file" configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." case "$ac_file" in *Makefile*) ac_comsub="1i\\ # $configure_input" ;; *) ac_comsub= ;; esac ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` sed -e "$ac_comsub s%@configure_input@%$configure_input%g s%@srcdir@%$srcdir%g s%@top_srcdir@%$top_srcdir%g s%@INSTALL@%$INSTALL%g " $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file fi; done rm -f conftest.s* # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where # NAME is the cpp macro being defined and VALUE is the value it is being given. # # ac_d sets the value in "#define NAME VALUE" lines. ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)' ac_dB='\([ ][ ]*\)[^ ]*%\1#\2' ac_dC='\3' ac_dD='%g' # ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE". ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' ac_uB='\([ ]\)%\1#\2define\3' ac_uC=' ' ac_uD='\4%g' # ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE". ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' ac_eB='$%\1#\2define\3' ac_eC=' ' ac_eD='%g' if test "${CONFIG_HEADERS+set}" != set; then EOF cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF fi for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case "$ac_file" in *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac echo creating $ac_file rm -f conftest.frag conftest.in conftest.out ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` cat $ac_file_inputs > conftest.in EOF # Transform confdefs.h into a sed script conftest.vals that substitutes # the proper values into config.h.in to produce config.h. And first: # Protect against being on the right side of a sed subst in config.status. # Protect against being in an unquoted here document in config.status. rm -f conftest.vals cat > conftest.hdr <<\EOF s/[\\&%]/\\&/g s%[\\$`]%\\&%g s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp s%ac_d%ac_u%gp s%ac_u%ac_e%gp EOF sed -n -f conftest.hdr confdefs.h > conftest.vals rm -f conftest.hdr # This sed command replaces #undef with comments. This is necessary, for # example, in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. cat >> conftest.vals <<\EOF s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */% EOF # Break up conftest.vals because some shells have a limit on # the size of here documents, and old seds have small limits too. rm -f conftest.tail while : do ac_lines=`grep -c . conftest.vals` # grep -c gives empty output for an empty file on some AIX systems. if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi # Write a limited-size here document to conftest.frag. echo ' cat > conftest.frag <> $CONFIG_STATUS sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS echo 'CEOF sed -f conftest.frag conftest.in > conftest.out rm -f conftest.in mv conftest.out conftest.in ' >> $CONFIG_STATUS sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail rm -f conftest.vals mv conftest.tail conftest.vals done rm -f conftest.vals cat >> $CONFIG_STATUS <<\EOF rm -f conftest.frag conftest.h echo "/* $ac_file. Generated automatically by configure. */" > conftest.h cat conftest.in >> conftest.h rm -f conftest.in if cmp -s $ac_file conftest.h 2>/dev/null; then echo "$ac_file is unchanged" rm -f conftest.h else # Remove last slash and all that follows it. Not all systems have dirname. ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then # The file is in a subdirectory. test ! -d "$ac_dir" && mkdir "$ac_dir" fi rm -f $ac_file mv conftest.h $ac_file fi fi; done EOF cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF exit 0 EOF chmod +x $CONFIG_STATUS rm -fr confdefs* $ac_clean_files test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 exit 0