#
# Makefile to build perl on Windows NT using Microsoft NMAKE.
#

##
## Make sure you read README.win32 *before* you mess with anything here!
##
## If you want a configuration that is the same as ActivePerl (see
## www.ActiveState.com) make sure you set at least BUILD_FLAVOR below!
##

##
## Build configuration.  Edit the values below to suit your needs.
##

#
# Set these to wherever you want "nmake install" to put your newly
# built perl.  Setting it to a path with spaces is NOT recommended.
#
INST_DRV	= c:
INST_TOP	= $(INST_DRV)\perl

#
# uncomment one of the following lines if you are using either
# Visual C++ 2.x, or Visual C++ 5.x (aka Visual Studio 97) _without_
# service pack 3 applied.
#
# If you have 5.x SP3 or later, or 6.x, no change is required.
#
#CCTYPE		= MSVC20
#CCTYPE		= MSVC_PRE_50SP3

#
# set the install locations of the compiler include/libraries. Running
# VCVARS32.BAT is *required* when using Visual C.  Some versions of
# Visual C earlier than 5.x SP3 don't define MSVCDIR in the environment.
# If such is the case you may have to set CCHOME explicitly.  Spaces in
# the path name should not be quoted.
#
# If you have run VCVARS32.BAT and have VC 5.x SP3 or later, the defaults
# should just work.
#
#CCHOME		= f:\msvc20
CCHOME		= $(MSVCDIR)
CCINCDIR	= $(CCHOME)\include
CCLIBDIR	= $(CCHOME)\lib

#
# if you have the source for des_fcrypt(), uncomment CRYPT_SRC and make sure
# the file exists (see README.win32).  File should be located in the same
# directory as this makefile.
#
# If you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
# library, uncomment CRYPT_LIB, and make sure the library exists (see
# README.win32).  Specify the full pathname of the library.
#
# If you don't enable one of these, the crypt() builtin will fail to work.
# (Generally not critical.)
#
#CRYPT_SRC	= fcrypt.c
#CRYPT_LIB	= fcrypt.lib

#
# uncomment this option if you want to bulk-enable all the options that
# ActiveState uses to build their ActivePerl distribution.  If you set this,
# there should be no need to set any of the other options that follow.
#
# If you don't enable this, the defaults below will get you the most
# efficient perl configuration possible that will also be compatible
# with the build defaults used on Unix platforms.  On the other hand,
# the ActivePerl configuration will get you fork() emulation at the
# cost of some added bloat.
#
#BUILD_FLAVOR	= ActivePerl

#
# uncomment next line if you want debug version of perl (big and slow).
# If not enabled, we automatically try to use maximum optimization
# with all compilers that are known to have a working optimizer.
#
#CFG		= Debug

#
# Comment this out if you DON'T want your perl installation to be versioned.
# This means that the new installation will overwrite any files from the
# old installation at the same INST_TOP location.  Leaving it enabled is
# the safest route, as perl adds the extra version directory to all the
# locations it installs files to.  If you disable it, an alternative
# versioned installation can be obtained by setting INST_TOP above to a
# path that includes an arbitrary version string.
#
INST_VER = \5.6.1

#
# Comment this out if you DON'T want your perl installation to have
# architecture specific components.  This means that architecture-
# specific files will be installed along with the architecture-neutral
# files.  Leaving it enabled is safer and more flexible, in case you
# want to build multiple flavors of perl and install them together in
# the same location.  Commenting it out gives you a simpler
# installation that is easier to understand for beginners.
#
INST_ARCH = \$(ARCHNAME)

#
# uncomment to enable multiple interpreters.  This is need for fork()
# emulation.
#
#USE_MULTI = define

#
# Beginnings of interpreter cloning/threads; still very incomplete.
# This should be enabled to get the fork() emulation.  This needs
# USE_MULTI as well.
#
#USE_ITHREADS = define

#
# uncomment to enable the implicit "host" layer for all system calls
# made by perl.  This needs USE_MULTI above.  This is also needed to
# get fork().
#
#USE_IMP_SYS = define

#
# WARNING! This option is deprecated and will eventually go away (enable
# USE_ITHREADS instead).
#
# uncomment to enable threads-capabilities.  This is incompatible with
# USE_ITHREADS, and is only here for people who may have come to rely
# on the experimental Thread support that was in 5.005.
#
#USE_5005THREADS= define

#
# WARNING! This option is deprecated and will eventually go away (enable
# USE_MULTI instead).
#
# uncomment next line if you want to use the PERL_OBJECT build option.
# DO NOT ENABLE unless you have legacy code that relies on the C++
# CPerlObj class that was available in 5.005.  This cannot be enabled
# if you ask for USE_5005THREADS or USE_MULTI above.
#
#USE_OBJECT	= define

#
# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
# It has patches that fix known bugs in older versions of MSVCRT.DLL.
# This currently requires VC 5.0 with Service Pack 3 or later.
# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/
# and follow the directions in the package to install.
#
# Not recommended if you have VC 6.x and you're not running Windows 9x.
#
#USE_PERLCRT	= define

#
# uncomment to enable linking with setargv.obj under the Visual C
# compiler. Setting this option enables perl to expand wildcards in
# arguments, but it may be harder to use alternate methods like
# File::DosGlob that are more powerful, or use perl inside shells
# that do the expansion for you.  This option is supported only
# with Visual C.
#
#USE_SETARGV	= define

#
# set this if you wish to use perl's malloc
# WARNING: Turning this on/off WILL break binary compatibility with extensions
# you may have compiled with/without it.  Be prepared to recompile all
# extensions if you change the default.  Currently, this cannot be enabled
# if you ask for USE_IMP_SYS above.
#
#PERL_MALLOC	= define

#
# Additional compiler flags can be specified here.
#

#
# This should normally be disabled.  Adding -DPERL_POLLUTE enables support
# for old symbols by default, at the expense of extreme pollution.  You most
# probably just want to build modules that won't compile with
#         perl Makefile.PL POLLUTE=1
# instead of enabling this.  Please report such modules to the respective
# authors.
#
#BUILDOPT	= $(BUILDOPT) -DPERL_POLLUTE

#
# This should normally be disabled.  Enabling it will disable the File::Glob
# implementation of CORE::glob.
#
#BUILDOPT	= $(BUILDOPT) -DPERL_EXTERNAL_GLOB

#
# This should normally be disabled.  Enabling it causes perl to read scripts
# in text mode (which is the 5.005 behavior) and will break ByteLoader.
#BUILDOPT	= $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS

#
# specify semicolon-separated list of extra directories that modules will
# look for libraries (spaces in path names need not be quoted)
#
EXTRALIBDIRS	=

#
# set this to your email address (perl will guess a value from
# from your loginname and your hostname, which may not be right)
#
#EMAIL		=

##
## Build configuration ends.
##

##################### CHANGE THESE ONLY IF YOU MUST #####################

!IF "$(BUILD_FLAVOR)" == "ActivePerl"
INST_VER	= 
INST_ARCH	= 
USE_MULTI	= define
USE_ITHREADS	= define
USE_IMP_SYS	= define
USE_5005THREADS	= undef
USE_OBJECT	= undef
USE_PERLCRT	= undef
USE_SETARGV	=
PERL_MALLOC	= undef
!ENDIF

!IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
D_CRYPT		= undef
!ELSE
D_CRYPT		= define
CRYPT_FLAG	= -DHAVE_DES_FCRYPT
!ENDIF

!IF "$(USE_OBJECT)" == "define"
PERL_MALLOC	= undef
USE_5005THREADS	= undef
USE_MULTI	= undef
USE_IMP_SYS	= define
!ENDIF

!IF "$(PERL_MALLOC)" == ""
PERL_MALLOC	= undef
!ENDIF

!IF "$(USE_5005THREADS)" == ""
USE_5005THREADS	= undef
!ENDIF

!IF "$(USE_5005THREADS)" == "define"
USE_ITHREADS	= undef
!ENDIF

!IF "$(USE_IMP_SYS)" == "define"
PERL_MALLOC	= undef
!ENDIF

!IF "$(CCTYPE)" == ""
CCTYPE		= MSVC60
!ENDIF

!IF "$(USE_MULTI)" == ""
USE_MULTI	= undef
!ENDIF

!IF "$(USE_OBJECT)" == ""
USE_OBJECT	= undef
!ENDIF

!IF "$(USE_ITHREADS)" == ""
USE_ITHREADS	= undef
!ENDIF

!IF "$(USE_IMP_SYS)" == ""
USE_IMP_SYS	= undef
!ENDIF

!IF "$(USE_PERLCRT)" == ""
USE_PERLCRT	= undef
!ENDIF

!IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef"
USE_MULTI	= define
!ENDIF

!IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef"
USE_MULTI	= define
USE_5005THREADS	= undef
!ENDIF

!IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef"
BUILDOPT	= $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
!ENDIF

!IF "$(USE_IMP_SYS)" != "undef"
BUILDOPT	= $(BUILDOPT) -DPERL_IMPLICIT_SYS
!ENDIF

!IF "$(PROCESSOR_ARCHITECTURE)" == ""
PROCESSOR_ARCHITECTURE	= x86
!ENDIF

!IF "$(USE_OBJECT)" == "define"
ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-object
!ELSE
!IF "$(USE_5005THREADS)" == "define"
ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
!ELSE
!IF "$(USE_MULTI)" == "define"
ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
!ELSE
ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)
!ENDIF
!ENDIF
!ENDIF

!IF "$(USE_ITHREADS)" == "define"
ARCHNAME	= $(ARCHNAME)-thread
!ENDIF

# Visual Studio 98 specific
!IF "$(CCTYPE)" == "MSVC60"
# VC 6.0 can load the socket dll on demand.  Makes the test suite
# run in about 10% less time.
DELAYLOAD	= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib 
!ENDIF


ARCHDIR		= ..\lib\$(ARCHNAME)
COREDIR		= ..\lib\CORE
AUTODIR		= ..\lib\auto
LIBDIR		= ..\lib
EXTDIR		= ..\ext
PODDIR		= ..\pod
EXTUTILSDIR	= $(LIBDIR)\ExtUtils

#
INST_SCRIPT	= $(INST_TOP)$(INST_VER)\bin
INST_BIN	= $(INST_SCRIPT)$(INST_ARCH)
INST_LIB	= $(INST_TOP)$(INST_VER)\lib
INST_ARCHLIB	= $(INST_LIB)$(INST_ARCH)
INST_COREDIR	= $(INST_ARCHLIB)\CORE
INST_POD	= $(INST_LIB)\pod
INST_HTML	= $(INST_TOP)$(INST_VER)\html

#
# Programs to compile, build .lib files and link
#

CC		= cl
LINK32		= link
LIB32		= $(LINK32) -lib
RSC		= rc

#
# Options
#

INCLUDES	= -I$(COREDIR) -I.\include -I. -I..
#PCHFLAGS	= -Fpc:\temp\vcmoduls.pch -YX 
DEFINES		= -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
LOCDEFS		= -DPERLDLL -DPERL_CORE
SUBSYS		= console
CXX_FLAG	= -TP -GX

!IF "$(USE_PERLCRT)" != "define"
LIBC	= msvcrt.lib
!ELSE
LIBC	= PerlCRT.lib
!ENDIF

PERLEXE_RES	=
PERLDLL_RES	=

!IF  "$(CFG)" == "Debug"
!  IF "$(CCTYPE)" == "MSVC20"
OPTIMIZE	= -Od -MD -Z7 -DDEBUGGING
!  ELSE
OPTIMIZE	= -Od -MD -Zi -DDEBUGGING
!  ENDIF
LINK_DBG	= -debug -pdb:none
!ELSE
# -O1 yields smaller code, which turns out to be faster than -O2
OPTIMIZE	= -O1 -MD -DNDEBUG
# VC 6.0 seems capable of compiling perl correctly with optimizations
# enabled.  Anything earlier fails tests.
!  IF "$(CCTYPE)" == "MSVC20" || "$(CCTYPE)" == "MSVC_PRE_50SP3"
OPTIMIZE	= -Od -MD -DNDEBUG
!  ENDIF
LINK_DBG	= -release
!ENDIF


!IF "$(USE_OBJECT)" == "define"
OPTIMIZE	= $(OPTIMIZE) $(CXX_FLAG)
BUILDOPT	= $(BUILDOPT) -DPERL_OBJECT
!ENDIF

!IF "$(USE_PERLCRT)" != "define"
BUILDOPT	= $(BUILDOPT) -DPERL_MSVCRT_READFIX
!ENDIF

LIBBASEFILES	= $(CRYPT_LIB) \
		oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
		comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
		netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
		version.lib odbc32.lib odbccp32.lib

# we add LIBC here, since we may be using PerlCRT.dll
LIBFILES	= $(LIBBASEFILES) $(LIBC)

CFLAGS		= -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
		$(PCHFLAGS) $(OPTIMIZE)
LINK_FLAGS	= -nologo -nodefaultlib $(LINK_DBG) \
		-libpath:"$(INST_COREDIR)" \
		-machine:$(PROCESSOR_ARCHITECTURE)
OBJOUT_FLAG	= -Fo
EXEOUT_FLAG	= -Fe

CFLAGS_O	= $(CFLAGS) $(BUILDOPT)

#################### do not edit below this line #######################
############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############

o = .obj

#
# Rules
# 

.SUFFIXES : .c $(o) .dll .lib .exe .rc .res

.c$(o):
	$(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<

.y.c:
	$(NOOP)

$(o).dll:
	$(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
	    -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)  

.rc.res:
	$(RSC) -i.. $<

#
# various targets
PERLIMPLIB	= ..\perl56.lib
PERLDLL		= ..\perl56.dll

MINIPERL	= ..\miniperl.exe
MINIDIR		= .\mini
PERLEXE		= ..\perl.exe
WPERLEXE	= ..\wperl.exe
GLOBEXE		= ..\perlglob.exe
CONFIGPM	= ..\lib\Config.pm
MINIMOD		= ..\lib\ExtUtils\Miniperl.pm
X2P		= ..\x2p\a2p.exe

PL2BAT		= bin\pl2bat.pl
GLOBBAT		= bin\perlglob.bat

UTILS		=			\
		..\utils\h2ph		\
		..\utils\splain		\
		..\utils\dprofpp	\
		..\utils\perlbug	\
		..\utils\pl2pm 		\
		..\utils\c2ph		\
		..\utils\h2xs		\
		..\utils\perldoc	\
		..\utils\perlcc		\
		..\pod\checkpods	\
		..\pod\pod2html		\
		..\pod\pod2latex	\
		..\pod\pod2man		\
		..\pod\pod2text		\
		..\pod\pod2usage	\
		..\pod\podchecker	\
		..\pod\podselect	\
		..\x2p\find2perl	\
		..\x2p\s2p		\
		bin\exetype.pl		\
		bin\runperl.pl		\
		bin\pl2bat.pl		\
		bin\perlglob.pl		\
		bin\search.pl

MAKE		= nmake -nologo

CFGSH_TMPL	= config.vc
CFGH_TMPL	= config_H.vc

XCOPY		= xcopy /f /r /i /d
RCOPY		= xcopy /f /r /i /e /d
NOOP		= @echo
NULL		=

#
# filenames given to xsubpp must have forward slashes (since it puts
# full pathnames in #line strings)
XSUBPP		= ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
		-C++ -prototypes

MICROCORE_SRC	=		\
		..\av.c		\
		..\deb.c	\
		..\doio.c	\
		..\doop.c	\
		..\dump.c	\
		..\globals.c	\
		..\gv.c		\
		..\hv.c		\
		..\mg.c		\
		..\op.c		\
		..\perl.c	\
		..\perlapi.c	\
		..\perly.c	\
		..\pp.c		\
		..\pp_ctl.c	\
		..\pp_hot.c	\
		..\pp_sys.c	\
		..\regcomp.c	\
		..\regexec.c	\
		..\run.c	\
		..\scope.c	\
		..\sv.c		\
		..\taint.c	\
		..\toke.c	\
		..\universal.c	\
		..\utf8.c	\
		..\util.c	\
		..\xsutils.c

EXTRACORE_SRC	= $(EXTRACORE_SRC) perllib.c

!IF "$(PERL_MALLOC)" == "define"
EXTRACORE_SRC	= $(EXTRACORE_SRC) ..\malloc.c
!ENDIF

!IF "$(USE_OBJECT)" != "define"
EXTRACORE_SRC	= $(EXTRACORE_SRC) ..\perlio.c
!ENDIF

WIN32_SRC	=		\
		.\win32.c	\
		.\win32sck.c	\
		.\win32thread.c 

!IF "$(CRYPT_SRC)" != ""
WIN32_SRC	= $(WIN32_SRC) .\$(CRYPT_SRC)
!ENDIF

DLL_SRC		= $(DYNALOADER).c

X2P_SRC		=		\
		..\x2p\a2p.c	\
		..\x2p\hash.c	\
		..\x2p\str.c	\
		..\x2p\util.c	\
		..\x2p\walk.c

CORE_NOCFG_H	=		\
		..\av.h		\
		..\cop.h	\
		..\cv.h		\
		..\dosish.h	\
		..\embed.h	\
		..\form.h	\
		..\gv.h		\
		..\handy.h	\
		..\hv.h		\
		..\iperlsys.h	\
		..\mg.h		\
		..\nostdio.h	\
		..\op.h		\
		..\opcode.h	\
		..\perl.h	\
		..\perlapi.h	\
		..\perlsdio.h	\
		..\perlsfio.h	\
		..\perly.h	\
		..\pp.h		\
		..\proto.h	\
		..\regexp.h	\
		..\scope.h	\
		..\sv.h		\
		..\thread.h	\
		..\unixish.h	\
		..\utf8.h	\
		..\util.h	\
		..\warnings.h	\
		..\XSUB.h	\
		..\EXTERN.h	\
		..\perlvars.h	\
		..\intrpvar.h	\
		..\thrdvar.h	\
		.\include\dirent.h	\
		.\include\netdb.h	\
		.\include\sys\socket.h	\
		.\win32.h

CORE_H		= $(CORE_NOCFG_H) .\config.h

MICROCORE_OBJ	= $(MICROCORE_SRC:.c=.obj)
CORE_OBJ	= $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
WIN32_OBJ	= $(WIN32_SRC:.c=.obj)
MINICORE_OBJ	= $(MICROCORE_OBJ:..\=.\mini\)	\
		  $(MINIDIR)\miniperlmain$(o)	\
		  $(MINIDIR)\perlio$(o)
MINIWIN32_OBJ	= $(WIN32_OBJ:.\=.\mini\)
MINI_OBJ	= $(MINICORE_OBJ) $(MINIWIN32_OBJ)
DLL_OBJ		= $(DLL_SRC:.c=.obj)
X2P_OBJ		= $(X2P_SRC:.c=.obj)

PERLDLL_OBJ	= $(CORE_OBJ)
PERLEXE_OBJ	= perlmain$(o)

PERLDLL_OBJ	= $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
#PERLEXE_OBJ	= $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)

!IF "$(USE_SETARGV)" != ""
SETARGV_OBJ	= setargv$(o)
!ENDIF

DYNAMIC_EXT	= Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
		Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
		Sys/Hostname
STATIC_EXT	= DynaLoader
NONXS_EXT	= Errno

DYNALOADER	= $(EXTDIR)\DynaLoader\DynaLoader
SOCKET		= $(EXTDIR)\Socket\Socket
FCNTL		= $(EXTDIR)\Fcntl\Fcntl
OPCODE		= $(EXTDIR)\Opcode\Opcode
SDBM_FILE	= $(EXTDIR)\SDBM_File\SDBM_File
IO		= $(EXTDIR)\IO\IO
POSIX		= $(EXTDIR)\POSIX\POSIX
ATTRS		= $(EXTDIR)\attrs\attrs
THREAD		= $(EXTDIR)\Thread\Thread
B		= $(EXTDIR)\B\B
RE		= $(EXTDIR)\re\re
DUMPER		= $(EXTDIR)\Data\Dumper\Dumper
ERRNO		= $(EXTDIR)\Errno\Errno
PEEK		= $(EXTDIR)\Devel\Peek\Peek
BYTELOADER	= $(EXTDIR)\ByteLoader\ByteLoader
DPROF		= $(EXTDIR)\Devel\DProf\DProf
GLOB		= $(EXTDIR)\File\Glob\Glob
HOSTNAME	= $(EXTDIR)\Sys\Hostname\Hostname

SOCKET_DLL	= $(AUTODIR)\Socket\Socket.dll
FCNTL_DLL	= $(AUTODIR)\Fcntl\Fcntl.dll
OPCODE_DLL	= $(AUTODIR)\Opcode\Opcode.dll
SDBM_FILE_DLL	= $(AUTODIR)\SDBM_File\SDBM_File.dll
IO_DLL		= $(AUTODIR)\IO\IO.dll
POSIX_DLL	= $(AUTODIR)\POSIX\POSIX.dll
ATTRS_DLL	= $(AUTODIR)\attrs\attrs.dll
THREAD_DLL	= $(AUTODIR)\Thread\Thread.dll
B_DLL		= $(AUTODIR)\B\B.dll
DUMPER_DLL	= $(AUTODIR)\Data\Dumper\Dumper.dll
PEEK_DLL	= $(AUTODIR)\Devel\Peek\Peek.dll
RE_DLL		= $(AUTODIR)\re\re.dll
BYTELOADER_DLL	= $(AUTODIR)\ByteLoader\ByteLoader.dll
DPROF_DLL	= $(AUTODIR)\Devel\DProf\DProf.dll
GLOB_DLL	= $(AUTODIR)\File\Glob\Glob.dll
HOSTNAME_DLL	= $(AUTODIR)\Sys\Hostname\Hostname.dll

ERRNO_PM	= $(LIBDIR)\Errno.pm

EXTENSION_C	= 		\
		$(SOCKET).c	\
		$(FCNTL).c	\
		$(OPCODE).c	\
		$(SDBM_FILE).c	\
		$(IO).c		\
		$(POSIX).c	\
		$(ATTRS).c	\
		$(THREAD).c	\
		$(RE).c		\
		$(DUMPER).c	\
		$(PEEK).c	\
		$(B).c		\
		$(BYTELOADER).c	\
		$(DPROF).c	\
		$(GLOB).c	\
		$(HOSTNAME).c

EXTENSION_DLL	= 		\
		$(SOCKET_DLL)	\
		$(FCNTL_DLL)	\
		$(OPCODE_DLL)	\
		$(SDBM_FILE_DLL)\
		$(IO_DLL)	\
		$(POSIX_DLL)	\
		$(ATTRS_DLL)	\
		$(DUMPER_DLL)	\
		$(PEEK_DLL)	\
		$(B_DLL)	\
		$(RE_DLL)	\
		$(THREAD_DLL)	\
		$(BYTELOADER_DLL)	\
		$(DPROF_DLL)	\
		$(GLOB_DLL)	\
		$(HOSTNAME_DLL)

EXTENSION_PM	=		\
		$(ERRNO_PM)

POD2HTML	= $(PODDIR)\pod2html
POD2MAN		= $(PODDIR)\pod2man
POD2LATEX	= $(PODDIR)\pod2latex
POD2TEXT	= $(PODDIR)\pod2text

CFG_VARS	=					\
		"INST_DRV=$(INST_DRV)"			\
		"INST_TOP=$(INST_TOP)"			\
		"INST_VER=$(INST_VER)"			\
		"INST_ARCH=$(INST_ARCH)"		\
		"archname=$(ARCHNAME)"			\
		"cc=$(CC)"				\
		"ccflags=-nologo $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)"	\
		"cf_email=$(EMAIL)"			\
		"d_crypt=$(D_CRYPT)"			\
		"d_mymalloc=$(PERL_MALLOC)"		\
		"libs=$(LIBFILES)"			\
		"incpath=$(CCINCDIR:"=\")"		\
		"libperl=$(PERLIMPLIB:..\=)"		\
		"libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")"	\
		"libc=$(LIBC)"				\
		"make=nmake"				\
		"static_ext=$(STATIC_EXT)"		\
		"dynamic_ext=$(DYNAMIC_EXT)"		\
		"nonxs_ext=$(NONXS_EXT)"		\
		"use5005threads=$(USE_5005THREADS)"	\
		"useithreads=$(USE_ITHREADS)"		\
		"usethreads=$(USE_5005THREADS)"		\
		"usemultiplicity=$(USE_MULTI)"		\
		"LINK_FLAGS=$(LINK_FLAGS:"=\")"		\
		"optimize=$(OPTIMIZE:"=\")"

#
# Top targets
#

all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
	$(X2P) $(EXTENSION_DLL) $(EXTENSION_PM)

$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c

#------------------------------------------------------------

$(GLOBEXE) : perlglob$(o)
	$(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
	    perlglob$(o) setargv$(o) 

perlglob$(o)  : perlglob.c

config.w32 : $(CFGSH_TMPL)
	copy $(CFGSH_TMPL) config.w32

.\config.h : $(CFGH_TMPL)
	-del /f config.h
	copy $(CFGH_TMPL) config.h

..\config.sh : config.w32 $(MINIPERL) config_sh.PL
	$(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh

# this target is for when changes to the main config.sh happen
# edit config.{b,v,g}c and make this target once for each supported
# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
regen_config_h:
	perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
	cd ..
	-del /f perl.exe
	perl configpm
	cd win32
	-del /f $(CFGH_TMPL)
	-mkdir $(COREDIR)
	-perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"
	rename config.h $(CFGH_TMPL)

$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
	cd .. && miniperl configpm
	if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
	$(XCOPY) ..\*.h $(COREDIR)\*.*
	$(XCOPY) *.h $(COREDIR)\*.*
	$(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
	$(RCOPY) include $(COREDIR)\*.*
	$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
	    || $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)

$(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
	$(LINK32) -subsystem:console -out:$@ @<<
	$(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)
<<

$(MINIDIR) :
	if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"

$(MINICORE_OBJ) : $(CORE_NOCFG_H)
	$(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c

$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
	$(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c

# -DPERL_IMPLICIT_SYS needs C++ for perllib.c
# This is the only file that depends on perlhost.h, vmem.h, and vdir.h
!IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef"
perllib$(o)	: perllib.c .\perlhost.h .\vdir.h .\vmem.h
	$(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
!ENDIF

# 1. we don't want to rebuild miniperl.exe when config.h changes
# 2. we don't want to rebuild miniperl.exe with non-default config.h
$(MINI_OBJ)	: $(CORE_NOCFG_H)

$(WIN32_OBJ)	: $(CORE_H)
$(CORE_OBJ)	: $(CORE_H)
$(DLL_OBJ)	: $(CORE_H)
$(X2P_OBJ)	: $(CORE_H)

perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
	$(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
	    CCTYPE=$(CCTYPE) > perldll.def

$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
	$(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @<<
		$(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)
<<
	$(XCOPY) $(PERLIMPLIB) $(COREDIR)

$(MINIMOD) : $(MINIPERL) ..\minimod.pl
	cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm

..\x2p\a2p$(o) : ..\x2p\a2p.c
	$(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c

..\x2p\hash$(o) : ..\x2p\hash.c
	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c

..\x2p\str$(o) : ..\x2p\str.c
	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c

..\x2p\util$(o) : ..\x2p\util.c
	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c

..\x2p\walk$(o) : ..\x2p\walk.c
	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c

$(X2P) : $(MINIPERL) $(X2P_OBJ)
	$(MINIPERL) ..\x2p\find2perl.PL
	$(MINIPERL) ..\x2p\s2p.PL
	$(LINK32) -subsystem:console -out:$@ @<<
		$(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)
<<

perlmain.c : runperl.c 
	copy runperl.c perlmain.c

perlmain$(o) : perlmain.c
	$(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c

$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
	$(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
	    $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
	copy $(PERLEXE) $(WPERLEXE)
	$(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
	copy splittree.pl .. 
	$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)

$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
	if not exist $(AUTODIR) mkdir $(AUTODIR)
	cd $(EXTDIR)\$(*B)
	..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
	..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
	cd ..\..\win32
	$(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
	$(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
	cd $(EXTDIR)\$(*B)
	$(XSUBPP) dl_win32.xs > $(*B).c
	cd ..\..\win32

$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
	copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs

$(DUMPER_DLL): $(PERLEXE) $(DUMPER).xs
	cd $(EXTDIR)\Data\$(*B)
	..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
	$(MAKE)
	cd ..\..\..\win32

$(DPROF_DLL): $(PERLEXE) $(DPROF).xs
	cd $(EXTDIR)\Devel\$(*B)
	..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
	$(MAKE)
	cd ..\..\..\win32

$(GLOB_DLL): $(PERLEXE) $(GLOB).xs
	cd $(EXTDIR)\File\$(*B)
	..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
	$(MAKE)
	cd ..\..\..\win32

$(PEEK_DLL): $(PERLEXE) $(PEEK).xs
	cd $(EXTDIR)\Devel\$(*B)
	..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
	$(MAKE)
	cd ..\..\..\win32

$(RE_DLL): $(PERLEXE) $(RE).xs
	cd $(EXTDIR)\$(*B)
	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
	$(MAKE)
	cd ..\..\win32

$(B_DLL): $(PERLEXE) $(B).xs
	cd $(EXTDIR)\$(*B)
	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
	$(MAKE)
	cd ..\..\win32

$(THREAD_DLL): $(PERLEXE) $(THREAD).xs
	cd $(EXTDIR)\$(*B)
	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
	$(MAKE)
	cd ..\..\win32

$(ATTRS_DLL): $(PERLEXE) $(ATTRS).xs
	cd $(EXTDIR)\$(*B)
	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
	$(MAKE)
	cd ..\..\win32

$(POSIX_DLL): $(PERLEXE) $(POSIX).xs
	cd $(EXTDIR)\$(*B)
	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
	$(MAKE)
	cd ..\..\win32

$(IO_DLL): $(PERLEXE) $(IO).xs
	cd $(EXTDIR)\$(*B)
	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
	$(MAKE)
	cd ..\..\win32

$(SDBM_FILE_DLL) : $(PERLEXE) $(SDBM_FILE).xs
	cd $(EXTDIR)\$(*B)
	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
	$(MAKE)
	cd ..\..\win32

$(FCNTL_DLL): $(PERLEXE) $(FCNTL).xs
	cd $(EXTDIR)\$(*B)
	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
	$(MAKE)
	cd ..\..\win32

$(OPCODE_DLL): $(PERLEXE) $(OPCODE).xs
	cd $(EXTDIR)\$(*B)
	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
	$(MAKE)
	cd ..\..\win32

$(SOCKET_DLL): $(PERLEXE) $(SOCKET).xs
	cd $(EXTDIR)\$(*B)
	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
	$(MAKE)
	cd ..\..\win32

$(HOSTNAME_DLL): $(PERLEXE) $(HOSTNAME).xs
	cd $(EXTDIR)\Sys\$(*B)
	..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
	$(MAKE)
	cd ..\..\..\win32

$(BYTELOADER_DLL): $(PERLEXE) $(BYTELOADER).xs
	cd $(EXTDIR)\$(*B)
	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
	$(MAKE)
	cd ..\..\win32

$(ERRNO_PM): $(PERLEXE) $(ERRNO)_pm.PL
	cd $(EXTDIR)\$(*B)
	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
	$(MAKE)
	cd ..\..\win32

doc: $(PERLEXE)
	$(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
	    --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
	    --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse

utils: $(PERLEXE) $(X2P)
	cd ..\utils
	$(MAKE) PERL=$(MINIPERL)
	cd ..\pod
	copy ..\README.aix	.\perlaix.pod
	copy ..\README.amiga	.\perlamiga.pod
	copy ..\README.bs2000	.\perlbs2000.pod
	copy ..\README.cygwin	.\perlcygwin.pod
	copy ..\README.dos	.\perldos.pod
	copy ..\README.epoc	.\perlepoc.pod
	copy ..\README.hpux	.\perlhpux.pod
	copy ..\README.machten	.\perlmachten.pod
	copy ..\README.macos	.\perlmacos.pod
	copy ..\README.mpeix	.\perlmpeix.pod
	copy ..\README.os2	.\perlos2.pod
	copy ..\README.os390	.\perlos390.pod
	copy ..\README.solaris	.\perlsolaris.pod
	copy ..\README.vmesa	.\perlvmesa.pod
	copy ..\vms\perlvms.pod	.\perlvms.pod
	copy ..\README.vos	.\perlvos.pod
	copy ..\README.win32	.\perlwin32.pod
	$(MAKE) -f ..\win32\pod.mak converters
	cd ..\win32
	$(PERLEXE) $(PL2BAT) $(UTILS)

distclean: clean
	-del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
		$(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)
	-del /f *.def *.map
	-del /f $(EXTENSION_DLL) $(EXTENSION_PM)
	-del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
	-del /f $(EXTDIR)\DynaLoader\dl_win32.xs $(EXTDIR)\DynaLoader\DynaLoader.pm
	-del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
	-del /f $(LIBDIR)\XSLoader.pm $(EXTDIR)\DynaLoader\XSLoader.pm
	-del /f $(LIBDIR)\Devel\.exists $(LIBDIR)\File\.exists $(LIBDIR)\Sys\.exists
	-del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
	-del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm
	-del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
	-del /f $(LIBDIR)\B.pm $(EXTDIR)\B\defsubs.h $(LIBDIR)\O.pm $(LIBDIR)\re.pm
	-del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
	-del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
	-del /f $(LIBDIR)\File\Glob.pm
	-if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO
	-if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread
	-if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B
	-if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data
	cd $(PODDIR)
	-del /f *.html *.bat checkpods \
	    perlaix.pod perlamiga.pod perlbs2000.pod perlcygwin.pod \
	    perldos.pod perlepoc.pod perlhpux.pod perlmachten.pod \
	    perlmacos.pod perlmpeix.pod perlos2.pod perlos390.pod \
	    perlsolaris.pod perlvmesa.pod perlvms.pod perlvos.pod \
	    perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \
	    podchecker podselect
	cd ..\utils
	-del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc dprofpp \
	    *.bat perlcc pstruct
	cd ..\win32
	cd ..\x2p
	-del /f find2perl s2p
	-del /f *.bat
	cd ..\win32
	-del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
	-del /f $(CONFIGPM)
	-del /f bin\*.bat
	cd $(EXTDIR)
	-del /s *.lib *.def *.map *.pdb *.bs Makefile *$(o) pm_to_blib
	cd ..\win32
	-if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)
	-if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)

install : all installbare installhtml

installbare : utils
	$(PERLEXE) ..\installperl
	if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
	$(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
	$(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*

installhtml : doc
	$(RCOPY) html\*.* $(INST_HTML)\*.*

inst_lib : $(CONFIGPM)
	copy splittree.pl .. 
	$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
	$(RCOPY) ..\lib $(INST_LIB)\*.*

minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
	$(XCOPY) $(MINIPERL) ..\t\perl.exe
	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
	attrib -r ..\t\*.*
	copy test ..\t
	cd ..\t
	$(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
	cd ..\win32

test-prep : all utils
	$(XCOPY) $(PERLEXE) ..\t\$(NULL)
	$(XCOPY) $(PERLDLL) ..\t\$(NULL)
	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)

test : test-prep
	cd ..\t
	$(PERLEXE) -I..\lib harness
	cd ..\win32

test-notty : test-prep
	set PERL_SKIP_TTY_TEST=1
	cd ..\t
	$(PERLEXE) -I..\lib harness
	cd ..\win32

test-wide : test-prep
	set HARNESS_PERL_SWITCHES=-C
	cd ..\t
	$(PERLEXE) -I..\lib harness
	cd ..\win32

test-wide-notty : test-prep
	set PERL_SKIP_TTY_TEST=1
	set HARNESS_PERL_SWITCHES=-C
	cd ..\t
	$(PERLEXE) -I..\lib harness
	cd ..\win32

clean : 
	-@erase miniperlmain$(o)
	-@erase $(MINIPERL)
	-@erase perlglob$(o)
	-@erase perlmain$(o)
	-@erase config.w32
	-@erase /f config.h
	-@erase $(GLOBEXE)
	-@erase $(PERLEXE)
	-@erase $(WPERLEXE)
	-@erase $(PERLDLL)
	-@erase $(CORE_OBJ)
	-if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR)
	-@erase $(WIN32_OBJ)
	-@erase $(DLL_OBJ)
	-@erase $(X2P_OBJ)
	-@erase ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
	-@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
	-@erase ..\x2p\*.exe ..\x2p\*.bat
	-@erase *.ilk
	-@erase *.pdb
 
# Handy way to run perlbug -ok without having to install and run the
# installed perlbug. We don't re-run the tests here - we trust the user.
# Please *don't* use this unless all tests pass.
# If you want to report test failures, use "nmake nok" instead.
ok: utils
	$(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"

okfile: utils
	$(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
 
nok: utils
	$(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
 
nokfile: utils
	$(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok