#!/bin/sh
#***********************************************************************
#
# adsl-setup
#
# All-purpose slicing/dicing shell script to configure rp-pppoe.
#
# Copyright (C) 2000 Roaring Penguin Software Inc.
#
# $Id$
#***********************************************************************

# From AUTOCONF
prefix=@prefix@
exec_prefix=@exec_prefix@

# Paths to programs
IFCONFIG=/sbin/ifconfig
PPPD=@PPPD@
PPPOE=@sbindir@/pppoe
LOGGER="/usr/bin/logger -t `basename $0`"

CONFIG=/etc/ppp/pppoe.conf

copy() {
    cp $1 $2
    if [ "$?" != 0 ] ; then
	echo "*** Error copying $1 to $2"
	echo "*** Quitting."
	exit 1
    fi
}

echo "Welcome to the Roaring Penguin ADSL client setup.  First, I will run"
echo "some checks on your system to make sure the PPPoE client is installed"
echo "properly..."
echo ""

# Must be root
if [ "`id -u`" != 0 ] ; then
    echo "$0: Sorry, you must be root to run this script"
    exit 1
fi

# Prototype config file must exist
if [ ! -r "$CONFIG" ] ; then
    echo "Oh, dear, I don't see the file '$CONFIG' anywhere.  Please"
    echo "re-install the PPPoE client."
    exit 1
fi

# Must have pppd
if [ ! -x $PPPD ] ; then
    echo "Oops, I can't execute the program '$PPPD'.  You"
    echo "must install the PPP software suite, version 2.3.10 or later."
    exit 1
fi

. $CONFIG

if [ "$DEMAND" = "" ] ; then
    DEMAND=no
fi

# pppoe must exist
if [ ! -x "$PPPOE" ] ; then
    echo "Oh, dear, I can't execute the program '$PPPOE'.  Please"
    echo "re-install the rp-pppoe client."
    exit 1
fi

echo "Looks good!  Now, please enter some information:"

while [ true ] ; do
    echo ""
    echo "USER NAME"
    echo ""
    echo -n ">>> Enter your PPPoE user name (default $USER): "
    read U

    if [ "$U" = "" ] ; then
	U="$USER"
    fi

    echo ""
    echo "INTERFACE"
    echo ""
    echo ">>> Enter the Ethernet interface connected to the ADSL modem"
    echo "For Solaris, this is likely to be something like /dev/hme0."
    echo "For Linux, it will be ethn, where 'n' is a number."
    echo -n "(default $ETH): "
    read E

    if [ "$E" = "" ] ; then
	E="$ETH"
    fi

    echo ""
    echo "Do you want the link to come up on demand, or stay up continuously?"
    echo "If you want it to come up on demand, enter the idle time in seconds"
    echo "after which the link should be dropped.  If you want the link to"
    echo "stay up permanently, enter 'no' (two letters, lower-case.)"
    echo "NOTE: Demand-activated links do not interact well with dynamic IP"
    echo "addresses.  You may have some problems with demand-activated links."
    echo -n ">>> Enter the demand value (default $DEMAND): "
    read D
    if [ "$D" = "" ] ; then
	D=$DEMAND
    fi

    echo ""
    echo "DNS"
    echo ""
    echo "Please enter the IP address of your ISP's primary DNS server."
    echo "If your ISP claims that 'the server will provide DNS addresses',"
    echo "enter 'server' (all lower-case) here."
    echo "If you just press enter, I will assume you know what you are"
    echo "doing and not modify your DNS setup."
    echo -n ">>> Enter the DNS information here: "

    read DNS1


    if [ "$DNS1" != "" ] ; then
        if [ "$DNS1" != "server" ] ; then
	    echo "Please enter the IP address of your ISP's secondary DNS server."
	    echo "If you just press enter, I will assume there is only one DNS server."
	    echo -n ">>> Enter the secondary DNS server address here: "
	    read DNS2
	fi
    fi

    while [ true ] ; do
	echo ""
	echo "PASSWORD"
	echo ""
	stty -echo
	echo -n ">>> Please enter your PPPoE password:    "
	read PWD1
	echo ""
	echo -n ">>> Please re-enter your PPPoE password: "
	read PWD2
	echo ""
	stty echo
	if [ "$PWD1" = "$PWD2" ] ; then
	    break
	fi

	echo -n ">>> Sorry, the passwords do not match.  Try again? (y/n)"
	read ANS
	case "$ANS" in
	    N|No|NO|Non|n|no|non)
		echo "OK, quitting.  Bye."
		exit 1
	esac
    done

    # Firewalling
    echo ""
    echo "FIREWALLING"
    echo ""
    if test `uname -s` != "Linux" ; then
	echo "Sorry, firewalling is only supported under Linux.  Consult"
	echo "your operating system manuals for details on setting up"
	echo "packet filters for your system."
	FIREWALL=NONE
    else
	echo "Please choose the firewall rules to use.  Note that these rules are"
	echo "very basic.  You are strongly encouraged to use a more sophisticated"
	echo "firewall setup; however, these will provide basic security.  If you"
	echo "are running any servers on your machine, you must choose 'NONE' and"
	echo "set up firewalling yourself.  Otherwise, the firewall rules will deny"
	echo "access to all standard servers like Web, e-mail, ftp, etc.  If you"
	echo "are using SSH, the rules will block outgoing SSH connections which"
	echo "allocate a privileged source port."
	echo ""
	while [ true ] ; do
	    echo "The firewall choices are:"
	    echo "0 - NONE: This script will not set any firewall rules.  You are responsible"
	    echo "          for ensuring the security of your machine.  You are STRONGLY"
	    echo "          recommended to use some kind of firewall rules."
	    echo "1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation"
	    echo "2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway"
	    echo "                for a LAN"
	    echo -n ">>> Choose a type of firewall (0-2): "
	    read a
	    if [ "$a" = 0 -o "$a" = 1 -o "$a" = 2 ] ; then
		break
	    fi
	    echo "Please enter a number from 0 to 2"
	done

	case "$a" in
	    0)
		FIREWALL=NONE
		;;
	    1)
		FIREWALL=STANDALONE
		;;
	    2)
		FIREWALL=MASQUERADE
		;;
	esac
    fi

    echo ""
    echo "** Summary of what you entered **"
    echo ""
    echo "Ethernet Interface: $E"
    echo "User name:          $U"
    if [ "$D" = "no" ] ; then
	echo "Activate-on-demand: No"
    else
	echo "Activate-on-demand: Yes; idle timeout = $D seconds"
    fi

    if [ "$DNS1" != "" ] ; then
        if [ "$DNS1" = "server" ] ; then
	    echo "DNS addresses:      Supplied by ISP's server"
        else
	    echo "Primary DNS:        $DNS1"
	    if [ "$DNS2" != "" ] ; then
		echo "Secondary DNS:      $DNS2"
	    fi
        fi
    else
	echo "DNS:                Do not adjust"
    fi
    echo "Firewalling:        $FIREWALL"
    echo ""
    while [ true ] ; do
        echo -n '>>> Accept these settings and adjust configuration files (y/n)? '
        read ANS
	case "ANS" in
	    Y|y|yes|Yes|oui|Oui)
		ANS=y
		;;
            N|n|no|No|non|Non)
		ANS=n
		;;
	esac
	if [ "$ANS" = "y" -o "$ANS" = "n" ] ; then
	    break
        fi
    done
    if [ "$ANS" = "y" ] ; then
	break
    fi
done

# Adjust configuration files.  First to $CONFIG

echo "Adjusting $CONFIG"

copy $CONFIG $CONFIG-bak
if [ "$DNS1" = "server" ] ; then
    USEPEERDNS=yes
else
    USEPEERDNS=no
fi

# Some #$(*& ISP's use a slash in the user name...
sed -e "s&^USER=.*&USER='$U'&" \
    -e "s/^ETH=.*/ETH='$E'/" \
    -e "s/^FIREWALL=.*/FIREWALL=$FIREWALL/" \
    -e "s/^DEMAND=.*/DEMAND=$D/" \
    -e "s/^USEPEERDNS=.*/USEPEERDNS=$USEPEERDNS/" \
    < $CONFIG-bak > $CONFIG

if [ $? != 0 ] ; then
    echo "** Error modifying $CONFIG"
    echo "** Quitting"
    exit 1
fi

if [ "$DNS1" != "" ] ; then
    if [ "$DNS1" != "server" ] ; then
	echo "Adjusting /etc/resolv.conf"
	grep -s "MADE-BY-RP-PPPOE" /etc/resolv.conf > /dev/null 2>&1
	if [ "$?" != 0 ] ; then
	    echo "  (But first backing it up to /etc/resolv.conf-bak)"
	    copy /etc/resolv.conf /etc/resolv.conf-bak
	fi
	echo "# MADE-BY-RP-PPPOE" > /etc/resolv.conf
	echo "nameserver $DNS1" >> /etc/resolv.conf
	if [ "$DNS2" != "" ] ; then
	    echo "nameserver $DNS2" >> /etc/resolv.conf
	fi
    fi
fi

echo "Adjusting /etc/ppp/pap-secrets and /etc/ppp/chap-secrets"
if [ -r /etc/ppp/pap-secrets ] ; then
    echo "  (But first backing it up to /etc/ppp/pap-secrets-bak)"
    copy /etc/ppp/pap-secrets /etc/ppp/pap-secrets-bak
else
    cp /dev/null /etc/ppp/pap-secrets-bak
fi
if [ -r /etc/ppp/chap-secrets ] ; then
    echo "  (But first backing it up to /etc/ppp/chap-secrets-bak)"
    copy /etc/ppp/chap-secrets /etc/ppp/chap-secrets-bak
else
    cp /dev/null /etc/ppp/chap-secrets-bak
fi

egrep -v "^$U|^\"$U\"" /etc/ppp/pap-secrets-bak > /etc/ppp/pap-secrets
echo "\"$U\"	*	\"$PWD1\"" >> /etc/ppp/pap-secrets
egrep -v "^$U|^\"$U\"" /etc/ppp/chap-secrets-bak > /etc/ppp/chap-secrets
echo "\"$U\"	*	\"$PWD1\"" >> /etc/ppp/chap-secrets

echo ""
echo ""
echo ""
echo "Congratulations, it should be all set up!"
echo ""
echo "Type 'adsl-start' to bring up your ADSL link and 'adsl-stop' to bring"
echo "it down.  Type 'adsl-status' to see the link status."
exit 0