ziplimit.txt A) Hard limits of the Zip archive format: Number of entries in Zip archive: 64 k (2^16 - 1 entries) Compressed size of archive entry: 4 GByte (2^32 - 1 Bytes) Uncompressed size of entry: 4 GByte (2^32 - 1 Bytes) Size of single-volume Zip archive: 4 GByte (2^32 - 1 Bytes) Per-volume size of multi-volume archives: 4 GByte (2^32 - 1 Bytes) Number of parts for multi-volume archives: 64 k (1^16 - 1 parts) Total size of multi-volume archive: 256 TByte (4G * 64k) The number of archive entries and of multivolume parts are limited by the structure of the "end-of-central-directory" record, where the these numbers are stored in 2-Byte fields. Some Zip and/or UnZip implementations (for example Info-ZIP's) allow handling of archives with more than 64k entries. (The information from "number of entries" field in the "end-of-central-directory" record is not really neccessary to retrieve the contents of a Zip archive; it should rather be used for consistency checks.) Length of an archive entry name: 64 kByte (2^16 - 1) Length of archive member comment: 64 kByte (2^16 - 1) Total length of "extra field": 64 kByte (2^16 - 1) Length of a single e.f. block: 64 kByte (2^16 - 1) Length of archive comment: 64 KByte (2^16 - 1) Additional limitation claimed by PKWARE: Size of local-header structure (fixed fields of 30 Bytes + filename local extra field): < 64 kByte Size of central-directory structure (46 Bytes + filename + central extra field + member comment): < 64 kByte Note: In 2001, PKWARE has published version 4.5 of the Zip format specification (together with the release of PKZIP for Windows 4.5). This specification defines new extra field blocks that allow to break the size limits of the standard zipfile structures. In this extended "Zip64" format, the limits on the size of zip entries and the size of the complete zip archive are extended to (2^64 - 1) Bytes; the maximum number of archive entries and split volumes are enlarged to (2^64 - 1) respective (2^32 - 1). Currently, these extensions are not yet supported by the released Info-ZIP software. However, new major releases (Zip 3.0 and UnZip 6.0) are under development and will support Zip64 archives on selected environments. (Beta releases are already available for Unix, VMS and Win32.) B) Implementation limits of UnZip: 1. Size limits caused by file I/O and decompression handling: Size of Zip archive: 2 GByte (2^31 - 1 Bytes) Compressed size of archive entry: 2 GByte (2^31 - 1 Bytes) Note: On some systems, UnZip may support archive sizes up to 4 GByte. To get this support, the target environment has to meet the following requirements: a) The compiler's intrinsic "long" data types must be able to hold integer numbers of 2^32. In other words - the standard intrinsic integer types "long" and "unsigned long" have to be wider than 32 bit. b) The system has to supply a C runtime library that is compatible with the more-than-32-bit-wide "long int" type of condition a) c) The standard file positioning functions fseek(), ftell() (and/or the Unix style lseek() and tell() functions) have to be capable to move to absolute file offsets of up to 4 GByte from the file start. On 32-bit CPU hardware, you generally cannot expect that a C compiler provides a "long int" type that is wider than 32-bit. So, many of the most popular systems (i386, PowerPC, 680x0, et. al) are out of luck. You may find environment that provide all requirements on systems with 64-bit CPU hardware. Examples might be Cray number crunchers or Compaq (former DEC) Alpha AXP machines. The number of Zip archive entries is unlimited. The "number-of-entries" field of the "end-of-central-dir" record is checked against the "number of entries found in the central directory" modulus 64k (2^16). Multi-volume archive extraction is not supported. Memory requirements are mostly independent of the archive size and archive contents. In general, UnZip needs a fixed amount of internal buffer space plus the size to hold the complete information of the currently processed entry's local header. Here, a large extra field (could be up to 64 kByte) may exceed the available memory for MSDOS 16-bit executables (when they were compiled in small or medium memory model, with a fixed 64kByte limit on data space). The other exception where memory requirements scale with "larger" archives is the "restore directory attributes" feature. Here, the directory attributes info for each restored directory has to be held in memory until the whole archive has been processed. So, the amount of memory needed to keep this info scales with the number of restored directories and may cause memory problems when a lot of directories are restored in a single run. C) Implementation limits of the Zip executables: 1. Size limits caused by file I/O and compression handling: Size of Zip archive: 2 GByte (2^31 - 1 Bytes) Compressed size of archive entry: 2 GByte (2^31 - 1 Bytes) Uncompressed size of entry: 2 GByte (2^31 - 1 Bytes), (could/should be 4 GBytes...) Multi-volume archive creation is not supported. 2. Limits caused by handling of archive contents lists 2.1. Number of archive entries (freshen, update, delete) a) 16-bit executable: 64k (2^16 -1) or 32k (2^15 - 1), (unsigned vs. signed type of size_t) a1) 16-bit executable: <16k ((2^16)/4) (The smaller limit a1) results from the array size limit of the "qsort()" function.) 32-bit executables <1G ((2^32)/4) (usual system limit of the "qsort()" function on 32-bit systems) b) stack space needed by qsort to sort list of archive entries NOTE: In the current executables, overflows of limits a) and b) are NOT checked! c) amount of free memory to hold "central directory information" of all archive entries; one entry needs: 96 bytes (32-bit) resp. 80 bytes (16-bit) + 3 * length of entry name + length of zip entry comment (when present) + length of extra field(s) (when present, e.g.: UT needs 9 bytes) + some bytes for book-keeping of memory allocation Conclusion: For systems with limited memory space (MSDOS, small AMIGAs, other environments without virtual memory), the number of archive entries is most often limited by condition c). For example, with approx. 100 kBytes of free memory after loading and initializing the program, a 16-bit DOS Zip cannot process more than 600 to 1000 (+) archive entries. (For the 16-bit Windows DLL or the 16-bit OS/2 port, limit c) is less important because Windows or OS/2 executables are not restricted to the 1024k area of real mode memory. These 16-bit ports are limited by conditions a1) and b), say: at maximum approx. 16000 entries!) 2.2. Number of "new" entries (add operation) In addition to the restrictions above (2.1.), the following limits caused by the handling of the "new files" list apply: a) 16-bit executable: <16k ((2^64)/4) b) stack size required for "qsort" operation on "new entries" list. NOTE: In the current executables, the overflow checks for these limits are missing! c) amount of free memory to hold the directory info list for new entries; one entry needs: 24 bytes (32-bit) resp. 22 bytes (16-bit) + 3 * length of filename D) Some technical remarks: 1. The 2GByte size limit on archive files is a consequence of the portable C implementation of the Info-ZIP programs. Zip archive processing requires random access to the archive file for jumping between different parts of the archive's structure. In standard C, this is done via stdio functions fseek()/ftell() resp. unix-io functions lseek()/tell(). In many (most?) C implementations, these functions use "signed long" variables to hold offset pointers into sequential files. In most cases, this is a signed 32-bit number, which is limited to ca. 2E+09. There may be specific C runtime library implementations that interpret the offset numbers as unsigned, but for us, this is not reliable in the context of portable programming. 2. The 2GByte limit on the size of a single compressed archive member is again a consequence of the implementation in C. The variables used internally to count the size of the compressed data stream are of type "long", which is guaranted to be at least 32-bit wide on all supported environments. But, why do we use "signed" long and not "unsigned long"? Throughout the I/O handling of the compressed data stream, the sign bit of the "long" numbers is (mis-)used as a kind of overflow detection. In the end, this is caused by the fact that standard C lacks any overflow checking on integer arithmetics and does not support access to the underlying hardware's overflow detection (the status bits, especially "carry" and "overflow" of the CPU's flags-register) in a system-independent manner. So, we "misuse" the most-significant bit of the compressed data size counters as carry bit for efficient overflow/underflow detection. We could change the code to a different method of overflow detection, by using a bunch of "sanity" comparisons (kind of "is the calculated result plausible when compared with the operands"). But, this would "blow up" the code of the "inner loop", with remarkable loss of processing speed. Or, we could reduce the amount of consistency checks of the compressed data (e.g. detection of premature end of stream) to an absolute minimum, at the cost of the programs' stability when processing corrupted data. Summary: Changing the compression/decompression core routines to be "unsigned safe" would require excessive recoding, with little gain on maximum processable uncompressed size (a gain can only be expected for hardly compressable data), but at severe costs on performance, stability and maintainability. Therefore, it is quite unlikely that this will ever happen for Zip/UnZip. The argumentation above is somewhat out-dated. The new releases Zip 3 and UnZip 6 will support archive sizes larger than 4GB on systems where the required underlying support for 64-bit file offsets and file sizes is available from the OS (and the C runtime environment). However, this new support will partially break compatibility with older "legacy" systems. And it should be expected that the portability and readability of the UnZip and Zip code may be reduced due to the extensive use of non-standard language extension needed for 64-bit support on the major target systems. Please report any problems to: Zip-Bugs at www.info-zip.org Last updated: 22 February 2005, Christian Spieler