# generated automatically by aclocal 1.9.6 -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, # 2005 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. # lib-ld.m4 serial 3 (gettext-0.13) dnl Copyright (C) 1996-2003 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl Subroutines of libtool.m4, dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision dnl with libtool.m4. dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no. AC_DEFUN([AC_LIB_PROG_LD_GNU], [AC_CACHE_CHECK([if the linker ($LD) is GNU ld], acl_cv_prog_gnu_ld, [# I'd rather use --version here, but apparently some GNU ld's only accept -v. case `$LD -v 2>&1 conf$$.sh echo "exit 0" >>conf$$.sh chmod +x conf$$.sh if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conf$$.sh fi ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by GCC]) case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [[\\/]* | [A-Za-z]:[\\/]*)] [re_direlt='/[^/][^/]*/\.\./'] # Canonicalize the path of ld ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then AC_MSG_CHECKING([for GNU ld]) else AC_MSG_CHECKING([for non-GNU ld]) fi AC_CACHE_VAL(acl_cv_path_LD, [if test -z "$LD"; then IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then acl_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some GNU ld's only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in *GNU* | *'with BFD'*) test "$with_gnu_ld" != no && break ;; *) test "$with_gnu_ld" != yes && break ;; esac fi done IFS="$ac_save_ifs" else acl_cv_path_LD="$LD" # Let the user override the test with a path. fi]) LD="$acl_cv_path_LD" if test -n "$LD"; then AC_MSG_RESULT($LD) else AC_MSG_RESULT(no) fi test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) AC_LIB_PROG_LD_GNU ]) # lib-link.m4 serial 6 (gettext-0.14.3) dnl Copyright (C) 2001-2005 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl From Bruno Haible. AC_PREREQ(2.50) dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and dnl the libraries corresponding to explicit and implicit dependencies. dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and dnl augments the CPPFLAGS variable. AC_DEFUN([AC_LIB_LINKFLAGS], [ AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) AC_REQUIRE([AC_LIB_RPATH]) define([Name],[translit([$1],[./-], [___])]) define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [ AC_LIB_LINKFLAGS_BODY([$1], [$2]) ac_cv_lib[]Name[]_libs="$LIB[]NAME" ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME" ac_cv_lib[]Name[]_cppflags="$INC[]NAME" ]) LIB[]NAME="$ac_cv_lib[]Name[]_libs" LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs" INC[]NAME="$ac_cv_lib[]Name[]_cppflags" AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) AC_SUBST([LIB]NAME) AC_SUBST([LTLIB]NAME) dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the dnl results of this search when this library appears as a dependency. HAVE_LIB[]NAME=yes undefine([Name]) undefine([NAME]) ]) dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode) dnl searches for libname and the libraries corresponding to explicit and dnl implicit dependencies, together with the specified include files and dnl the ability to compile and link the specified testcode. If found, it dnl sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} and dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty. AC_DEFUN([AC_LIB_HAVE_LINKFLAGS], [ AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) AC_REQUIRE([AC_LIB_RPATH]) define([Name],[translit([$1],[./-], [___])]) define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME dnl accordingly. AC_LIB_LINKFLAGS_BODY([$1], [$2]) dnl Add $INC[]NAME to CPPFLAGS before performing the following checks, dnl because if the user has installed lib[]Name and not disabled its use dnl via --without-lib[]Name-prefix, he wants to use it. ac_save_CPPFLAGS="$CPPFLAGS" AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [ ac_save_LIBS="$LIBS" LIBS="$LIBS $LIB[]NAME" AC_TRY_LINK([$3], [$4], [ac_cv_lib[]Name=yes], [ac_cv_lib[]Name=no]) LIBS="$ac_save_LIBS" ]) if test "$ac_cv_lib[]Name" = yes; then HAVE_LIB[]NAME=yes AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the $1 library.]) AC_MSG_CHECKING([how to link with lib[]$1]) AC_MSG_RESULT([$LIB[]NAME]) else HAVE_LIB[]NAME=no dnl If $LIB[]NAME didn't lead to a usable library, we don't need dnl $INC[]NAME either. CPPFLAGS="$ac_save_CPPFLAGS" LIB[]NAME= LTLIB[]NAME= fi AC_SUBST([HAVE_LIB]NAME) AC_SUBST([LIB]NAME) AC_SUBST([LTLIB]NAME) undefine([Name]) undefine([NAME]) ]) dnl Determine the platform dependent parameters needed to use rpath: dnl libext, shlibext, hardcode_libdir_flag_spec, hardcode_libdir_separator, dnl hardcode_direct, hardcode_minus_L. AC_DEFUN([AC_LIB_RPATH], [ dnl Tell automake >= 1.10 to complain if config.rpath is missing. m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([config.rpath])]) AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir AC_CACHE_CHECK([for shared library run path origin], acl_cv_rpath, [ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh . ./conftest.sh rm -f ./conftest.sh acl_cv_rpath=done ]) wl="$acl_cv_wl" libext="$acl_cv_libext" shlibext="$acl_cv_shlibext" hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" hardcode_direct="$acl_cv_hardcode_direct" hardcode_minus_L="$acl_cv_hardcode_minus_L" dnl Determine whether the user wants rpath handling at all. AC_ARG_ENABLE(rpath, [ --disable-rpath do not hardcode runtime library paths], :, enable_rpath=yes) ]) dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and dnl the libraries corresponding to explicit and implicit dependencies. dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables. AC_DEFUN([AC_LIB_LINKFLAGS_BODY], [ define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) dnl By default, look in $includedir and $libdir. use_additional=yes AC_LIB_WITH_FINAL_PREFIX([ eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" ]) AC_LIB_ARG_WITH([lib$1-prefix], [ --with-lib$1-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib --without-lib$1-prefix don't search for lib$1 in includedir and libdir], [ if test "X$withval" = "Xno"; then use_additional=no else if test "X$withval" = "X"; then AC_LIB_WITH_FINAL_PREFIX([ eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" ]) else additional_includedir="$withval/include" additional_libdir="$withval/lib" fi fi ]) dnl Search the library and its dependencies in $additional_libdir and dnl $LDFLAGS. Using breadth-first-seach. LIB[]NAME= LTLIB[]NAME= INC[]NAME= rpathdirs= ltrpathdirs= names_already_handled= names_next_round='$1 $2' while test -n "$names_next_round"; do names_this_round="$names_next_round" names_next_round= for name in $names_this_round; do already_handled= for n in $names_already_handled; do if test "$n" = "$name"; then already_handled=yes break fi done if test -z "$already_handled"; then names_already_handled="$names_already_handled $name" dnl See if it was already located by an earlier AC_LIB_LINKFLAGS dnl or AC_LIB_HAVE_LINKFLAGS call. uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'` eval value=\"\$HAVE_LIB$uppername\" if test -n "$value"; then if test "$value" = yes; then eval value=\"\$LIB$uppername\" test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value" eval value=\"\$LTLIB$uppername\" test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value" else dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined dnl that this library doesn't exist. So just drop it. : fi else dnl Search the library lib$name in $additional_libdir and $LDFLAGS dnl and the already constructed $LIBNAME/$LTLIBNAME. found_dir= found_la= found_so= found_a= if test $use_additional = yes; then if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then found_dir="$additional_libdir" found_so="$additional_libdir/lib$name.$shlibext" if test -f "$additional_libdir/lib$name.la"; then found_la="$additional_libdir/lib$name.la" fi else if test -f "$additional_libdir/lib$name.$libext"; then found_dir="$additional_libdir" found_a="$additional_libdir/lib$name.$libext" if test -f "$additional_libdir/lib$name.la"; then found_la="$additional_libdir/lib$name.la" fi fi fi fi if test "X$found_dir" = "X"; then for x in $LDFLAGS $LTLIB[]NAME; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) case "$x" in -L*) dir=`echo "X$x" | sed -e 's/^X-L//'` if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then found_dir="$dir" found_so="$dir/lib$name.$shlibext" if test -f "$dir/lib$name.la"; then found_la="$dir/lib$name.la" fi else if test -f "$dir/lib$name.$libext"; then found_dir="$dir" found_a="$dir/lib$name.$libext" if test -f "$dir/lib$name.la"; then found_la="$dir/lib$name.la" fi fi fi ;; esac if test "X$found_dir" != "X"; then break fi done fi if test "X$found_dir" != "X"; then dnl Found the library. LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name" if test "X$found_so" != "X"; then dnl Linking with a shared library. We attempt to hardcode its dnl directory into the executable's runpath, unless it's the dnl standard /usr/lib. if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then dnl No hardcoding is needed. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" else dnl Use an explicit option to hardcode DIR into the resulting dnl binary. dnl Potentially add DIR to ltrpathdirs. dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. haveit= for x in $ltrpathdirs; do if test "X$x" = "X$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then ltrpathdirs="$ltrpathdirs $found_dir" fi dnl The hardcoding into $LIBNAME is system dependent. if test "$hardcode_direct" = yes; then dnl Using DIR/libNAME.so during linking hardcodes DIR into the dnl resulting binary. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" else if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then dnl Use an explicit option to hardcode DIR into the resulting dnl binary. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" dnl Potentially add DIR to rpathdirs. dnl The rpathdirs will be appended to $LIBNAME at the end. haveit= for x in $rpathdirs; do if test "X$x" = "X$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then rpathdirs="$rpathdirs $found_dir" fi else dnl Rely on "-L$found_dir". dnl But don't add it if it's already contained in the LDFLAGS dnl or the already constructed $LIBNAME haveit= for x in $LDFLAGS $LIB[]NAME; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-L$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir" fi if test "$hardcode_minus_L" != no; then dnl FIXME: Not sure whether we should use dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" dnl here. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" else dnl We cannot use $hardcode_runpath_var and LD_RUN_PATH dnl here, because this doesn't fit in flags passed to the dnl compiler. So give up. No hardcoding. This affects only dnl very old systems. dnl FIXME: Not sure whether we should use dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" dnl here. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" fi fi fi fi else if test "X$found_a" != "X"; then dnl Linking with a static library. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a" else dnl We shouldn't come here, but anyway it's good to have a dnl fallback. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name" fi fi dnl Assume the include files are nearby. additional_includedir= case "$found_dir" in */lib | */lib/) basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'` additional_includedir="$basedir/include" ;; esac if test "X$additional_includedir" != "X"; then dnl Potentially add $additional_includedir to $INCNAME. dnl But don't add it dnl 1. if it's the standard /usr/include, dnl 2. if it's /usr/local/include and we are using GCC on Linux, dnl 3. if it's already present in $CPPFLAGS or the already dnl constructed $INCNAME, dnl 4. if it doesn't exist as a directory. if test "X$additional_includedir" != "X/usr/include"; then haveit= if test "X$additional_includedir" = "X/usr/local/include"; then if test -n "$GCC"; then case $host_os in linux* | gnu* | k*bsd*-gnu) haveit=yes;; esac fi fi if test -z "$haveit"; then for x in $CPPFLAGS $INC[]NAME; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-I$additional_includedir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_includedir"; then dnl Really add $additional_includedir to $INCNAME. INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir" fi fi fi fi fi dnl Look for dependencies. if test -n "$found_la"; then dnl Read the .la file. It defines the variables dnl dlname, library_names, old_library, dependency_libs, current, dnl age, revision, installed, dlopen, dlpreopen, libdir. save_libdir="$libdir" case "$found_la" in */* | *\\*) . "$found_la" ;; *) . "./$found_la" ;; esac libdir="$save_libdir" dnl We use only dependency_libs. for dep in $dependency_libs; do case "$dep" in -L*) additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME. dnl But don't add it dnl 1. if it's the standard /usr/lib, dnl 2. if it's /usr/local/lib and we are using GCC on Linux, dnl 3. if it's already present in $LDFLAGS or the already dnl constructed $LIBNAME, dnl 4. if it doesn't exist as a directory. if test "X$additional_libdir" != "X/usr/lib"; then haveit= if test "X$additional_libdir" = "X/usr/local/lib"; then if test -n "$GCC"; then case $host_os in linux* | gnu* | k*bsd*-gnu) haveit=yes;; esac fi fi if test -z "$haveit"; then haveit= for x in $LDFLAGS $LIB[]NAME; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_libdir"; then dnl Really add $additional_libdir to $LIBNAME. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir" fi fi haveit= for x in $LDFLAGS $LTLIB[]NAME; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_libdir"; then dnl Really add $additional_libdir to $LTLIBNAME. LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir" fi fi fi fi ;; -R*) dir=`echo "X$dep" | sed -e 's/^X-R//'` if test "$enable_rpath" != no; then dnl Potentially add DIR to rpathdirs. dnl The rpathdirs will be appended to $LIBNAME at the end. haveit= for x in $rpathdirs; do if test "X$x" = "X$dir"; then haveit=yes break fi done if test -z "$haveit"; then rpathdirs="$rpathdirs $dir" fi dnl Potentially add DIR to ltrpathdirs. dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. haveit= for x in $ltrpathdirs; do if test "X$x" = "X$dir"; then haveit=yes break fi done if test -z "$haveit"; then ltrpathdirs="$ltrpathdirs $dir" fi fi ;; -l*) dnl Handle this in the next round. names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` ;; *.la) dnl Handle this in the next round. Throw away the .la's dnl directory; it is already contained in a preceding -L dnl option. names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` ;; *) dnl Most likely an immediate library name. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep" LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep" ;; esac done fi else dnl Didn't find the library; assume it is in the system directories dnl known to the linker and runtime loader. (All the system dnl directories known to the linker should also be known to the dnl runtime loader, otherwise the system is severely misconfigured.) LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name" fi fi fi done done if test "X$rpathdirs" != "X"; then if test -n "$hardcode_libdir_separator"; then dnl Weird platform: only the last -rpath option counts, the user must dnl pass all path elements in one option. We can arrange that for a dnl single library, but not when more than one $LIBNAMEs are used. alldirs= for found_dir in $rpathdirs; do alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir" done dnl Note: hardcode_libdir_flag_spec uses $libdir and $wl. acl_save_libdir="$libdir" libdir="$alldirs" eval flag=\"$hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" else dnl The -rpath options are cumulative. for found_dir in $rpathdirs; do acl_save_libdir="$libdir" libdir="$found_dir" eval flag=\"$hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" done fi fi if test "X$ltrpathdirs" != "X"; then dnl When using libtool, the option that works for both libraries and dnl executables is -R. The -R options are cumulative. for found_dir in $ltrpathdirs; do LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir" done fi ]) dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR, dnl unless already present in VAR. dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes dnl contains two or three consecutive elements that belong together. AC_DEFUN([AC_LIB_APPENDTOVAR], [ for element in [$2]; do haveit= for x in $[$1]; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X$element"; then haveit=yes break fi done if test -z "$haveit"; then [$1]="${[$1]}${[$1]:+ }$element" fi done ]) # lib-prefix.m4 serial 4 (gettext-0.14.2) dnl Copyright (C) 2001-2005 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl From Bruno Haible. dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't dnl require excessive bracketing. ifdef([AC_HELP_STRING], [AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])], [AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])]) dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed dnl to access previously installed libraries. The basic assumption is that dnl a user will want packages to use other packages he previously installed dnl with the same --prefix option. dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate dnl libraries, but is otherwise very convenient. AC_DEFUN([AC_LIB_PREFIX], [ AC_BEFORE([$0], [AC_LIB_LINKFLAGS]) AC_REQUIRE([AC_PROG_CC]) AC_REQUIRE([AC_CANONICAL_HOST]) AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) dnl By default, look in $includedir and $libdir. use_additional=yes AC_LIB_WITH_FINAL_PREFIX([ eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" ]) AC_LIB_ARG_WITH([lib-prefix], [ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib --without-lib-prefix don't search for libraries in includedir and libdir], [ if test "X$withval" = "Xno"; then use_additional=no else if test "X$withval" = "X"; then AC_LIB_WITH_FINAL_PREFIX([ eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" ]) else additional_includedir="$withval/include" additional_libdir="$withval/lib" fi fi ]) if test $use_additional = yes; then dnl Potentially add $additional_includedir to $CPPFLAGS. dnl But don't add it dnl 1. if it's the standard /usr/include, dnl 2. if it's already present in $CPPFLAGS, dnl 3. if it's /usr/local/include and we are using GCC on Linux, dnl 4. if it doesn't exist as a directory. if test "X$additional_includedir" != "X/usr/include"; then haveit= for x in $CPPFLAGS; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-I$additional_includedir"; then haveit=yes break fi done if test -z "$haveit"; then if test "X$additional_includedir" = "X/usr/local/include"; then if test -n "$GCC"; then case $host_os in linux* | gnu* | k*bsd*-gnu) haveit=yes;; esac fi fi if test -z "$haveit"; then if test -d "$additional_includedir"; then dnl Really add $additional_includedir to $CPPFLAGS. CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir" fi fi fi fi dnl Potentially add $additional_libdir to $LDFLAGS. dnl But don't add it dnl 1. if it's the standard /usr/lib, dnl 2. if it's already present in $LDFLAGS, dnl 3. if it's /usr/local/lib and we are using GCC on Linux, dnl 4. if it doesn't exist as a directory. if test "X$additional_libdir" != "X/usr/lib"; then haveit= for x in $LDFLAGS; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test "X$additional_libdir" = "X/usr/local/lib"; then if test -n "$GCC"; then case $host_os in linux*) haveit=yes;; esac fi fi if test -z "$haveit"; then if test -d "$additional_libdir"; then dnl Really add $additional_libdir to $LDFLAGS. LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir" fi fi fi fi fi ]) dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix, dnl acl_final_exec_prefix, containing the values to which $prefix and dnl $exec_prefix will expand at the end of the configure script. AC_DEFUN([AC_LIB_PREPARE_PREFIX], [ dnl Unfortunately, prefix and exec_prefix get only finally determined dnl at the end of configure. if test "X$prefix" = "XNONE"; then acl_final_prefix="$ac_default_prefix" else acl_final_prefix="$prefix" fi if test "X$exec_prefix" = "XNONE"; then acl_final_exec_prefix='${prefix}' else acl_final_exec_prefix="$exec_prefix" fi acl_save_prefix="$prefix" prefix="$acl_final_prefix" eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" prefix="$acl_save_prefix" ]) dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the dnl variables prefix and exec_prefix bound to the values they will have dnl at the end of the configure script. AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX], [ acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" $1 exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" ]) # Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_AUTOMAKE_VERSION(VERSION) # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION so it can be traced. # This function is AC_REQUIREd by AC_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.9.6])]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets # $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to # `$srcdir', `$srcdir/..', or `$srcdir/../..'. # # Of course, Automake must honor this variable whenever it calls a # tool from the auxiliary directory. The problem is that $srcdir (and # therefore $ac_aux_dir as well) can be either absolute or relative, # depending on how configure is run. This is pretty annoying, since # it makes $ac_aux_dir quite unusable in subdirectories: in the top # source directory, any form will work fine, but in subdirectories a # relative path needs to be adjusted first. # # $ac_aux_dir/missing # fails when called from a subdirectory if $ac_aux_dir is relative # $top_srcdir/$ac_aux_dir/missing # fails if $ac_aux_dir is absolute, # fails when called from a subdirectory in a VPATH build with # a relative $ac_aux_dir # # The reason of the latter failure is that $top_srcdir and $ac_aux_dir # are both prefixed by $srcdir. In an in-source build this is usually # harmless because $srcdir is `.', but things will broke when you # start a VPATH build or use an absolute $srcdir. # # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, # iff we strip the leading $srcdir from $ac_aux_dir. That would be: # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` # and then we would define $MISSING as # MISSING="\${SHELL} $am_aux_dir/missing" # This will work as long as MISSING is not called from configure, because # unfortunately $(top_srcdir) has no meaning in configure. # However there are other variables, like CC, which are often used in # configure, and could therefore not use this "fixed" $ac_aux_dir. # # Another solution, used here, is to always expand $ac_aux_dir to an # absolute PATH. The drawback is that using absolute paths prevent a # configured tree to be moved without reconfiguration. AC_DEFUN([AM_AUX_DIR_EXPAND], [dnl Rely on autoconf to set up CDPATH properly. AC_PREREQ([2.50])dnl # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` ]) # AM_CONDITIONAL -*- Autoconf -*- # Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 7 # AM_CONDITIONAL(NAME, SHELL-CONDITION) # ------------------------------------- # Define a conditional. AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ(2.52)dnl ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl AC_SUBST([$1_TRUE]) AC_SUBST([$1_FALSE]) if $2; then $1_TRUE= $1_FALSE='#' else $1_TRUE='#' $1_FALSE= fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then AC_MSG_ERROR([[conditional "$1" was never defined. Usually this means the macro was only invoked conditionally.]]) fi])]) # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 8 # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, # will think it sees a *use*, and therefore will trigger all it's # C support machinery. Also note that it means that autoscan, seeing # CC etc. in the Makefile, will ask for an AC_PROG_CC use... # _AM_DEPENDENCIES(NAME) # ---------------------- # See how the compiler implements dependency checking. # NAME is "CC", "CXX", "GCJ", or "OBJC". # We try a few techniques and use that to set a single cache variable. # # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular # dependency, and given that the user is not expected to run this macro, # just rely on AC_PROG_CC. AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl AC_REQUIRE([AM_MAKE_INCLUDE])dnl AC_REQUIRE([AM_DEP_TRACK])dnl ifelse([$1], CC, [depcc="$CC" am_compiler_list=], [$1], CXX, [depcc="$CXX" am_compiler_list=], [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], [depcc="$$1" am_compiler_list=]) AC_CACHE_CHECK([dependency style of $depcc], [am_cv_$1_dependencies_compiler_type], [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_$1_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` fi for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf case $depmode in nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; none) break ;; esac # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. if depmode=$depmode \ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_$1_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_$1_dependencies_compiler_type=none fi ]) AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) AM_CONDITIONAL([am__fastdep$1], [ test "x$enable_dependency_tracking" != xno \ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) ]) # AM_SET_DEPDIR # ------------- # Choose a directory name for dependency files. # This macro is AC_REQUIREd in _AM_DEPENDENCIES AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ]) # AM_DEP_TRACK # ------------ AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE(dependency-tracking, [ --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors]) if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) AC_SUBST([AMDEPBACKSLASH]) ]) # Generate code to set up dependency tracking. -*- Autoconf -*- # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. #serial 3 # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [for mf in $CONFIG_FILES; do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named `Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # So let's grep whole file. if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then dirpart=`AS_DIRNAME("$mf")` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`AS_DIRNAME(["$file"])` AS_MKDIR_P([$dirpart/$fdir]) # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done ])# _AM_OUTPUT_DEPENDENCY_COMMANDS # AM_OUTPUT_DEPENDENCY_COMMANDS # ----------------------------- # This macro should only be invoked once -- use via AC_REQUIRE. # # This code is only required when automatic dependency tracking # is enabled. FIXME. This creates each `.P' file that we will # need in order to bootstrap the dependency handling code. AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ]) # Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 8 # AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS. AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) # Do all the work for Automake. -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 12 # This macro actually does too much. Some checks are only needed if # your package does certain things. But this isn't really a big deal. # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) # AM_INIT_AUTOMAKE([OPTIONS]) # ----------------------------------------------- # The call with PACKAGE and VERSION arguments is the old style # call (pre autoconf-2.50), which is being phased out. PACKAGE # and VERSION should now be passed to AC_INIT and removed from # the call to AM_INIT_AUTOMAKE. # We support both call styles for the transition. After # the next Automake release, Autoconf can make the AC_INIT # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.58])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl # test to see if srcdir already configured if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi AC_SUBST([CYGPATH_W]) # Define the identity of the package. dnl Distinguish between old-style and new-style calls. m4_ifval([$2], [m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl _AM_IF_OPTION([no-define],, [AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl # Some tools Automake needs. AC_REQUIRE([AM_SANITY_CHECK])dnl AC_REQUIRE([AC_ARG_PROGRAM])dnl AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) AM_MISSING_PROG(AUTOCONF, autoconf) AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) AM_MISSING_PROG(AUTOHEADER, autoheader) AM_MISSING_PROG(MAKEINFO, makeinfo) AM_PROG_INSTALL_SH AM_PROG_INSTALL_STRIP AC_REQUIRE([AM_PROG_MKDIR_P])dnl # We need awk for the "check" target. The system "awk" is bad on # some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES(CC)], [define([AC_PROG_CC], defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], [_AM_DEPENDENCIES(CXX)], [define([AC_PROG_CXX], defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl ]) ]) # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header # that is generated. The stamp files are numbered to have different names. # Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the # loop where config.status creates the headers, so we can generate # our stamp files there. AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $1 | $1:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_SH # ------------------ # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl install_sh=${install_sh-"$am_aux_dir/install-sh"} AC_SUBST(install_sh)]) # Copyright (C) 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 2 # Check whether the underlying file-system supports filenames # with a leading dot. For instance MS-DOS doesn't. AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null AC_SUBST([am__leading_dot])]) # Check to see how 'make' treats includes. -*- Autoconf -*- # Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 3 # AM_MAKE_INCLUDE() # ----------------- # Check to see how make treats includes. AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo done .PHONY: am__doit END # If we don't find an include directive, just comment out the code. AC_MSG_CHECKING([for style of include used by $am_make]) am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # We grep out `Entering directory' and `Leaving directory' # messages which can occur if `w' ends up in MAKEFLAGS. # In particular we don't look at `^make:' because GNU make might # be invoked under some other name (usually "gmake"), in which # case it prints its new name instead of `make'. if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then am__include=include am__quote= _am_result=GNU fi # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then am__include=.include am__quote="\"" _am_result=BSD fi fi AC_SUBST([am__include]) AC_SUBST([am__quote]) AC_MSG_RESULT([$_am_result]) rm -f confinc confmf ]) # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- # Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 4 # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) $1=${$1-"${am_missing_run}$2"} AC_SUBST($1)]) # AM_MISSING_HAS_RUN # ------------------ # Define MISSING if not defined so far and test if it supports --run. # If it does, set am_missing_run to use it, otherwise, to nothing. AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= AC_MSG_WARN([`missing' script is too old or missing]) fi ]) # Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_MKDIR_P # --------------- # Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise. # # Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories # created by `make install' are always world readable, even if the # installer happens to have an overly restrictive umask (e.g. 077). # This was a mistake. There are at least two reasons why we must not # use `-m 0755': # - it causes special bits like SGID to be ignored, # - it may be too restrictive (some setups expect 775 directories). # # Do not use -m 0755 and let people choose whatever they expect by # setting umask. # # We cannot accept any implementation of `mkdir' that recognizes `-p'. # Some implementations (such as Solaris 8's) are not thread-safe: if a # parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c' # concurrently, both version can detect that a/ is missing, but only # one can create it and the other will error out. Consequently we # restrict ourselves to GNU make (using the --version option ensures # this.) AC_DEFUN([AM_PROG_MKDIR_P], [if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then # We used to keeping the `.' as first argument, in order to # allow $(mkdir_p) to be used without argument. As in # $(mkdir_p) $(somedir) # where $(somedir) is conditionally defined. However this is wrong # for two reasons: # 1. if the package is installed by a user who cannot write `.' # make install will fail, # 2. the above comment should most certainly read # $(mkdir_p) $(DESTDIR)$(somedir) # so it does not work when $(somedir) is undefined and # $(DESTDIR) is not. # To support the latter case, we have to write # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), # so the `.' trick is pointless. mkdir_p='mkdir -p --' else # On NextStep and OpenStep, the `mkdir' command does not # recognize any option. It will interpret all options as # directories to create, and then abort because `.' already # exists. for d in ./-p ./--version; do test -d $d && rmdir $d done # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. if test -f "$ac_aux_dir/mkinstalldirs"; then mkdir_p='$(mkinstalldirs)' else mkdir_p='$(install_sh) -d' fi fi AC_SUBST([mkdir_p])]) # Helper functions for option handling. -*- Autoconf -*- # Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 3 # _AM_MANGLE_OPTION(NAME) # ----------------------- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) # _AM_SET_OPTION(NAME) # ------------------------------ # Set option NAME. Presently that only means defining a flag for this option. AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), 1)]) # _AM_SET_OPTIONS(OPTIONS) # ---------------------------------- # OPTIONS is a space-separated list of Automake options. AC_DEFUN([_AM_SET_OPTIONS], [AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) # ------------------------------------------- # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) # Check to make sure that the build environment is sane. -*- Autoconf -*- # Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 4 # AM_SANITY_CHECK # --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 echo timestamp > conftest.file # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` if test "$[*]" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftest.file` fi rm -f conftest.file if test "$[*]" != "X $srcdir/configure conftest.file" \ && test "$[*]" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi test "$[2]" = conftest.file ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi AC_MSG_RESULT(yes)]) # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_STRIP # --------------------- # One issue with vendor `install' (even GNU) is that you can't # specify the program used to strip binaries. This is especially # annoying in cross-compiling environments, where the build's strip # is unlikely to handle the host's binaries. # Fortunately install-sh will honor a STRIPPROG variable, so we # always use install-sh in `make install-strip', and initialize # STRIPPROG with the value of the STRIP variable (set by the user). AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the `STRIP' environment variable to overrule this program. dnl Don't test for $cross_compiling = yes, because it might be `maybe'. if test "$cross_compiling" != no; then AC_CHECK_TOOL([STRIP], [strip], :) fi INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) # Check how to create a tarball. -*- Autoconf -*- # Copyright (C) 2004, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 2 # _AM_PROG_TAR(FORMAT) # -------------------- # Check how to create a tarball in format FORMAT. # FORMAT should be one of `v7', `ustar', or `pax'. # # Substitute a variable $(am__tar) that is a command # writing to stdout a FORMAT-tarball containing the directory # $tardir. # tardir=directory && $(am__tar) > result.tar # # Substitute a variable $(am__untar) that extract such # a tarball read from stdin. # $(am__untar) < result.tar AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. AM_MISSING_PROG([AMTAR], [tar]) m4_if([$1], [v7], [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], [m4_case([$1], [ustar],, [pax],, [m4_fatal([Unknown tar format])]) AC_MSG_CHECKING([how to create a $1 tar archive]) # Loop over all known methods to create a tar archive until one works. _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' _am_tools=${am_cv_prog_tar_$1-$_am_tools} # Do not fold the above two line into one, because Tru64 sh and # Solaris sh will not grok spaces in the rhs of `-'. for _am_tool in $_am_tools do case $_am_tool in gnutar) for _am_tar in tar gnutar gtar; do AM_RUN_LOG([$_am_tar --version]) && break done am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' am__untar="$_am_tar -xf -" ;; plaintar) # Must skip GNU tar: if it does not support --format= it doesn't create # ustar tarball either. (tar --version) >/dev/null 2>&1 && continue am__tar='tar chf - "$$tardir"' am__tar_='tar chf - "$tardir"' am__untar='tar xf -' ;; pax) am__tar='pax -L -x $1 -w "$$tardir"' am__tar_='pax -L -x $1 -w "$tardir"' am__untar='pax -r' ;; cpio) am__tar='find "$$tardir" -print | cpio -o -H $1 -L' am__tar_='find "$tardir" -print | cpio -o -H $1 -L' am__untar='cpio -i -H $1 -d' ;; none) am__tar=false am__tar_=false am__untar=false ;; esac # If the value was cached, stop now. We just wanted to have am__tar # and am__untar set. test -n "${am_cv_prog_tar_$1}" && break # tar/untar a dummy directory, and stop if the command works rm -rf conftest.dir mkdir conftest.dir echo GrepMe > conftest.dir/file AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) rm -rf conftest.dir if test -s conftest.tar; then AM_RUN_LOG([$am__untar /dev/null 2>&1 && break fi done rm -rf conftest.dir AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) AC_MSG_RESULT([$am_cv_prog_tar_$1])]) AC_SUBST([am__tar]) AC_SUBST([am__untar]) ]) # _AM_PROG_TAR m4_include([m4/curses.m4]) m4_include([m4/iconv.m4])