'\" t
.\"***************************************************************************
.\" Copyright (c) 1998-2004,2005 Free Software Foundation, Inc.              *
.\"                                                                          *
.\" Permission is hereby granted, free of charge, to any person obtaining a  *
.\" copy of this software and associated documentation files (the            *
.\" "Software"), to deal in the Software without restriction, including      *
.\" without limitation the rights to use, copy, modify, merge, publish,      *
.\" distribute, distribute with modifications, sublicense, and/or sell       *
.\" copies of the Software, and to permit persons to whom the Software is    *
.\" furnished to do so, subject to the following conditions:                 *
.\"                                                                          *
.\" The above copyright notice and this permission notice shall be included  *
.\" in all copies or substantial portions of the Software.                   *
.\"                                                                          *
.\" THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS  *
.\" OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF               *
.\" MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.   *
.\" IN NO EVENT SHALL THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,   *
.\" DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR    *
.\" OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR    *
.\" THE USE OR OTHER DEALINGS IN THE SOFTWARE.                               *
.\"                                                                          *
.\" Except as contained in this notice, the name(s) of the above copyright   *
.\" holders shall not be used in advertising or otherwise to promote the     *
.\" sale, use or other dealings in this Software without prior written       *
.\" authorization.                                                           *
.\"***************************************************************************
.\"
.\" $Id$
.TH tput 1 ""
.ds d @TERMINFO@
.ds n 1
.SH NAME
\fBtput\fR, \fBreset\fR - initialize a terminal or query terminfo database
.SH SYNOPSIS
\fBtput\fR [\fB-T\fR\fItype\fR] \fIcapname\fR [\fIparms\fR ... ]
.br
\fBtput\fR [\fB-T\fR\fItype\fR] \fBinit\fR
.br
\fBtput\fR [\fB-T\fR\fItype\fR] \fBreset\fR
.br
\fBtput\fR [\fB-T\fR\fItype\fR] \fBlongname\fR
.br
\fBtput -S\fR  \fB<<\fR
.br
\fBtput -V\fR
.br
.SH DESCRIPTION
The \fBtput\fR utility uses the \fBterminfo\fR database to make the
values of terminal-dependent capabilities and information available to
the shell (see \fBsh\fR(1)), to initialize or reset the terminal, or
return the long name of the requested terminal type.
The result depends upon the capability's type:
.RS
.TP 5
string
\fBtput\fR writes the string to the standard output.
No trailing newline is supplied.
.TP
integer
\fBtput\fR writes the decimal value to the standard output,
with a trailing newline.
.TP
boolean
\fBtput\fR simply sets the exit code
(\fB0\fR for TRUE if the terminal has the capability,
\fB1\fR for FALSE if it does not),
and writes nothing to the standard output.
.RE
.PP
Before using a value returned on the standard output,
the application should test the exit code
(e.g., \fB$?\fR, see \fBsh\fR(1)) to be sure it is \fB0\fR.
(See the \fBEXIT CODES\fR and \fBDIAGNOSTICS\fR sections.)
For a complete list of capabilities
and the \fIcapname\fR associated with each, see \fBterminfo\fR(\*n).
.TP
\fB-T\fR\fItype\fR
indicates the \fItype\fR of terminal.  Normally this option is
unnecessary, because the default is taken from the environment
variable \fBTERM\fR.  If \fB-T\fR is specified, then the shell
variables \fBLINES\fR and \fBCOLUMNS\fR will be ignored,and the
operating system will not be queried for the actual screen size.
.TP
\fIcapname\fR
indicates the capability from the \fBterminfo\fR database.  When
\fBtermcap\fR support is compiled in, the \fBtermcap\fR name for
the capability is also accepted.
.TP
\fIparms\fR
If the capability is a string that takes parameters, the arguments
\fIparms\fR will be instantiated into the string.
.IP
Most parameters are numbers.
Only a few terminfo capabilities require string parameters;
\fBtput\fR uses a table to decide which to pass as strings.
Normally \fBtput\fR uses \fBtparm\fR (3X) to perform the substitution.
If no parameters are given for the capability,
\fBtput\fR writes the string without performing the substitution.
.TP
\fB-S\fR
allows more than one capability per invocation of \fBtput\fR.  The
capabilities must be passed to \fBtput\fR from the standard input
instead of from the command line (see example).
Only one \fIcapname\fR is allowed per line.
The \fB-S\fR option changes the
meaning of the \fB0\fR and \fB1\fR boolean and string exit codes (see the
EXIT CODES section).
.IP
Again, \fBtput\fR uses a table and the presence of parameters in its input
to decide whether to use \fBtparm\fR (3X),
and how to interpret the parameters.
.TP
\fB-V\fR
reports the version of ncurses which was used in this program, and exits.
.TP
\fBinit\fR
If the \fBterminfo\fR database is present and an entry for the user's
terminal exists (see \fB-T\fR\fItype\fR, above), the following will
occur: (1) if present, the terminal's initialization strings will be
output (\fBis1\fR, \fBis2\fR, \fBis3\fR, \fBif\fR, \fBiprog\fR), (2)
any delays (e.g., newline) specified in the entry will be set in the
tty driver, (3) tabs expansion will be turned on or off according to
the specification in the entry, and (4) if tabs are not expanded,
standard tabs will be set (every 8 spaces).  If an entry does not
contain the information needed for any of the four above activities,
that activity will silently be skipped.
.TP
\fBreset\fR
Instead of putting out initialization strings, the terminal's
reset strings will be output if present (\fBrs1\fR, \fBrs2\fR, \fBrs3\fR, \fBrf\fR).
If the reset strings are not present, but initialization
strings are, the initialization strings will be output.
Otherwise, \fBreset\fR acts identically to \fBinit\fR.
.TP
\fBlongname\fR
If the \fBterminfo\fR database is present and an entry for the
user's terminal exists (see \fB-T\fR\fItype\fR above), then the long name
of the terminal will be put out.  The long name is the last
name in the first line of the terminal's description in the
\fBterminfo\fR database [see \fBterm\fR(5)].
.PP
If \fBtput\fR is invoked by a link named \fBreset\fR, this has the
same effect as \fBtput reset\fR.
See \fBtset\fR for comparison, which has similar behavior.
.SH EXAMPLES
.TP 5
\fBtput init\fR
Initialize the terminal according to the type of
terminal in the environmental variable \fBTERM\fR.  This
command should be included in everyone's .profile after
the environmental variable \fBTERM\fR has been exported, as
illustrated on the \fBprofile\fR(5) manual page.
.TP 5
\fBtput -T5620 reset\fR
Reset an AT&T 5620 terminal, overriding the type of
terminal in the environmental variable \fBTERM\fR.
.TP 5
\fBtput cup 0 0\fR
Send the sequence to move the cursor to row \fB0\fR, column \fB0\fR
(the upper left corner of the screen, usually known as the "home"
cursor position).
.TP 5
\fBtput clear\fR
Echo the clear-screen sequence for the current terminal.
.TP 5
\fBtput cols\fR
Print the number of columns for the current terminal.
.TP 5
\fBtput -T450 cols\fR
Print the number of columns for the 450 terminal.
.TP 5
\fBbold=`tput smso` offbold=`tput rmso`\fR
Set the shell variables \fBbold\fR, to begin stand-out mode
sequence, and \fBoffbold\fR, to end standout mode sequence,
for the current terminal.  This might be followed by a
prompt: \fBecho "${bold}Please type in your name: ${offbold}\\c"\fR
.TP 5
\fBtput hc\fR
Set exit code to indicate if the current terminal is a hard copy terminal.
.TP 5
\fBtput cup 23 4\fR
Send the sequence to move the cursor to row 23, column 4.
.TP 5
\fBtput cup\fR
Send the terminfo string for cursor-movement, with no parameters substituted.
.TP 5
\fBtput longname\fR
Print the long name from the \fBterminfo\fR database for the
type of terminal specified in the environmental
variable \fBTERM\fR.
.PP
.RS 5
\fBtput -S <<!\fR
.br
\fB> clear\fR
.br
\fB> cup 10 10\fR
.br
\fB> bold\fR
.br
\fB> !\fR
.RE
.TP 5
\&
This example shows \fBtput\fR processing several capabilities in one invocation.
It clears the screen,
moves the cursor to position 10, 10
and turns on bold (extra bright) mode.
The list is terminated by an exclamation mark (\fB!\fR) on a line by itself.
.SH FILES
.TP
\fB\*d\fR
compiled terminal description database
.TP
\fB@DATADIR@/tabset/*\fR
tab settings for some terminals, in a format
appropriate to be output to the terminal (escape
sequences that set margins and tabs); for more
information, see the "Tabs and Initialization"
section of \fBterminfo\fR(5)
.SH EXIT CODES
If the \fB-S\fR option is used,
\fBtput\fR checks for errors from each line,
and if any errors are found, will set the exit code to 4 plus the
number of lines with errors.
If no errors are found, the exit code is \fB0\fR.
No indication of which line failed can be given so
exit code \fB1\fR will never appear.  Exit codes \fB2\fR, \fB3\fR, and
\fB4\fR retain their usual interpretation.
If the \fB-S\fR option is not used,
the exit code depends on the type of \fIcapname\fR:
.RS 5
.TP
.I boolean
a value of \fB0\fR is set for TRUE and \fB1\fR for FALSE.
.TP
.I string
a value of \fB0\fR is set if the
\fIcapname\fR is defined for this terminal \fItype\fR (the value of
\fIcapname\fR is returned on standard output);
a value of \fB1\fR is set if \fIcapname\fR
is not defined for this terminal \fItype\fR
(nothing is written to standard output).
.TP
.I integer
a value of \fB0\fR is always set,
whether or not \fIcapname\fR is defined for this terminal \fItype\fR.
To determine if \fIcapname\fR is defined for this terminal \fItype\fR,
the user must test the value written to standard output.
A value of \fB-1\fR
means that \fIcapname\fR is not defined for this terminal \fItype\fR.
.TP
.I other
\fBreset\fR or \fBinit\fR may fail to find their respective files.
In that case, the exit code is set to 4 + \fBerrno\fR.
.RE
.PP
Any other exit code indicates an error; see the DIAGNOSTICS section.
.SH DIAGNOSTICS
\fBtput\fR prints the following error messages and sets the corresponding exit
codes.
.PP
.ne 15
.TS
l l.
exit code	error message
=
\fB0\fR	T{
(\fIcapname\fR is a numeric variable that is not specified in the
\fBterminfo\fR(\*n) database for this terminal type, e.g.
\fBtput -T450 lines\fR and \fBtput -T2621 xmc\fR)
T}
\fB1\fR	no error message is printed, see the \fBEXIT CODES\fR section.
\fB2\fR	usage error
\fB3\fR	unknown terminal \fItype\fR or no \fBterminfo\fR database
\fB4\fR	unknown \fBterminfo\fR capability \fIcapname\fR
\fB>4\fR	error occurred in -S
=
.TE
.SH PORTABILITY
The \fBlongname\fR and \fB-S\fR options, and the parameter-substitution
features used in the \fBcup\fR example, are not supported in BSD curses or in
AT&T/USL curses before SVr4.
.SH SEE ALSO
\fB@CLEAR@\fR(1),
\fBstty\fR(1),
\fBtabs\fR(\*n),
\fBterminfo\fR(5).
.\"#
.\"# The following sets edit modes for GNU EMACS
.\"# Local Variables:
.\"# mode:nroff
.\"# fill-column:79
.\"# End: