#! /bin/sh

# Guess values for system-dependent variables and create Makefiles.
# Generated automatically using autoconf version 2.13 
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.

# Defaults:
ac_help=
ac_default_prefix=/usr/local
# Any additions from configure.in:
ac_help="$ac_help
  --enable-shared[=PKGS]  build shared libraries [default=yes]"
ac_help="$ac_help
  --enable-static[=PKGS]  build static libraries [default=yes]"
ac_help="$ac_help
  --enable-fast-install[=PKGS]  optimize for fast installation [default=yes]"
ac_help="$ac_help
  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]"

# Find the correct PATH separator.  Usually this is `:', but
# DJGPP uses `;' like DOS.
if test "X${PATH_SEPARATOR+set}" != Xset; then
  UNAME=${UNAME-`uname 2>/dev/null`}
  case X$UNAME in
    *-DOS) lt_cv_sys_path_separator=';' ;;
    *)     lt_cv_sys_path_separator=':' ;;
  esac
  PATH_SEPARATOR=$lt_cv_sys_path_separator
fi


# Check that we are running under the correct shell.
SHELL=${CONFIG_SHELL-/bin/sh}

case X$ECHO in
X*--fallback-echo)
  # Remove one level of quotation (which was required for Make).
  ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
  ;;
esac

echo=${ECHO-echo}
if test "X$1" = X--no-reexec; then
  # Discard the --no-reexec flag, and continue.
  shift
elif test "X$1" = X--fallback-echo; then
  # Avoid inline document here, it may be left over
  :
elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
  # Yippee, $echo works!
  :
else
  # Restart under the correct shell.
  exec $SHELL "$0" --no-reexec ${1+"$@"}
fi

if test "X$1" = X--fallback-echo; then
  # used as fallback echo
  shift
  cat <<EOF

EOF
  exit 0
fi

# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi

if test -z "$ECHO"; then
if test "X${echo_test_string+set}" != Xset; then
# find a string as large as possible, as long as the shell can cope with it
  for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
    if (echo_test_string="`eval $cmd`") 2>/dev/null &&
       echo_test_string="`eval $cmd`" &&
       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
    then
      break
    fi
  done
fi

if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
   test "X$echo_testing_string" = "X$echo_test_string"; then
  :
else
  # The Solaris, AIX, and Digital Unix default echo programs unquote
  # backslashes.  This makes it impossible to quote backslashes using
  #   echo "$something" | sed 's/\\/\\\\/g'
  #
  # So, first we look for a working echo in the user's PATH.

  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR
  for dir in $PATH /usr/ucb; do
    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
       test "X$echo_testing_string" = "X$echo_test_string"; then
      echo="$dir/echo"
      break
    fi
  done
  IFS="$save_ifs"

  if test "X$echo" = Xecho; then
    # We didn't find a better echo, so look for alternatives.
    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
       test "X$echo_testing_string" = "X$echo_test_string"; then
      # This shell has a builtin print -r that does the trick.
      echo='print -r'
    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
	 test "X$CONFIG_SHELL" != X/bin/ksh; then
      # If we have ksh, try running configure again with it.
      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
      export ORIGINAL_CONFIG_SHELL
      CONFIG_SHELL=/bin/ksh
      export CONFIG_SHELL
      exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
    else
      # Try using printf.
      echo='printf %s\n'
      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
	 test "X$echo_testing_string" = "X$echo_test_string"; then
	# Cool, printf works
	:
      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
	   test "X$echo_testing_string" = 'X\t' &&
	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
	   test "X$echo_testing_string" = "X$echo_test_string"; then
	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
	export CONFIG_SHELL
	SHELL="$CONFIG_SHELL"
	export SHELL
	echo="$CONFIG_SHELL $0 --fallback-echo"
      elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
	   test "X$echo_testing_string" = 'X\t' &&
	   echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
	   test "X$echo_testing_string" = "X$echo_test_string"; then
	echo="$CONFIG_SHELL $0 --fallback-echo"
      else
	# maybe with a smaller string...
	prev=:

	for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
	  then
	    break
	  fi
	  prev="$cmd"
	done

	if test "$prev" != 'sed 50q "$0"'; then
	  echo_test_string=`eval $prev`
	  export echo_test_string
	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
	else
	  # Oops.  We lost completely, so just stick with echo.
	  echo=echo
	fi
      fi
    fi
  fi
fi
fi

# Copy echo and quote the copy suitably for passing to libtool from
# the Makefile, instead of quoting the original, which is used later.
ECHO=$echo
if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
   ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
fi


ac_help="$ac_help
  --disable-libtool-lock  avoid locking (might break parallel builds)"
ac_help="$ac_help
  --with-pic              try to use only PIC/non-PIC objects [default=use both]"

# Initialize some variables set by options.
# The variables have the same names as the options, with
# dashes changed to underlines.
build=NONE
cache_file=./config.cache
exec_prefix=NONE
host=NONE
no_create=
nonopt=NONE
no_recursion=
prefix=NONE
program_prefix=NONE
program_suffix=NONE
program_transform_name=s,x,x,
silent=
site=
srcdir=
target=NONE
verbose=
x_includes=NONE
x_libraries=NONE
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
datadir='${prefix}/share'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
libdir='${exec_prefix}/lib'
includedir='${prefix}/include'
oldincludedir='/usr/include'
infodir='${prefix}/info'
mandir='${prefix}/man'

# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
SHELL=${CONFIG_SHELL-/bin/sh}
# Maximum number of lines to put in a shell here document.
ac_max_here_lines=12

ac_prev=
for ac_option
do

  # If the previous option needs an argument, assign it.
  if test -n "$ac_prev"; then
    eval "$ac_prev=\$ac_option"
    ac_prev=
    continue
  fi

  case "$ac_option" in
  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
  *) ac_optarg= ;;
  esac

  # Accept the important Cygnus configure options, so we can diagnose typos.

  case "$ac_option" in

  -bindir | --bindir | --bindi | --bind | --bin | --bi)
    ac_prev=bindir ;;
  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
    bindir="$ac_optarg" ;;

  -build | --build | --buil | --bui | --bu)
    ac_prev=build ;;
  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
    build="$ac_optarg" ;;

  -cache-file | --cache-file | --cache-fil | --cache-fi \
  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
    ac_prev=cache_file ;;
  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
    cache_file="$ac_optarg" ;;

  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
    ac_prev=datadir ;;
  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
  | --da=*)
    datadir="$ac_optarg" ;;

  -disable-* | --disable-*)
    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
    fi
    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
    eval "enable_${ac_feature}=no" ;;

  -enable-* | --enable-*)
    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
    fi
    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
    case "$ac_option" in
      *=*) ;;
      *) ac_optarg=yes ;;
    esac
    eval "enable_${ac_feature}='$ac_optarg'" ;;

  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
  | --exec | --exe | --ex)
    ac_prev=exec_prefix ;;
  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
  | --exec=* | --exe=* | --ex=*)
    exec_prefix="$ac_optarg" ;;

  -gas | --gas | --ga | --g)
    # Obsolete; use --with-gas.
    with_gas=yes ;;

  -help | --help | --hel | --he)
    # Omit some internal or obsolete options to make the list less imposing.
    # This message is too long to be a string in the A/UX 3.1 sh.
    cat << EOF
Usage: configure [options] [host]
Options: [defaults in brackets after descriptions]
Configuration:
  --cache-file=FILE       cache test results in FILE
  --help                  print this message
  --no-create             do not create output files
  --quiet, --silent       do not print \`checking...' messages
  --version               print the version of autoconf that created configure
Directory and file names:
  --prefix=PREFIX         install architecture-independent files in PREFIX
                          [$ac_default_prefix]
  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
                          [same as prefix]
  --bindir=DIR            user executables in DIR [EPREFIX/bin]
  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
  --datadir=DIR           read-only architecture-independent data in DIR
                          [PREFIX/share]
  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
                          [PREFIX/com]
  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
  --includedir=DIR        C header files in DIR [PREFIX/include]
  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
  --infodir=DIR           info documentation in DIR [PREFIX/info]
  --mandir=DIR            man documentation in DIR [PREFIX/man]
  --srcdir=DIR            find the sources in DIR [configure dir or ..]
  --program-prefix=PREFIX prepend PREFIX to installed program names
  --program-suffix=SUFFIX append SUFFIX to installed program names
  --program-transform-name=PROGRAM
                          run sed PROGRAM on installed program names
EOF
    cat << EOF
Host type:
  --build=BUILD           configure for building on BUILD [BUILD=HOST]
  --host=HOST             configure for HOST [guessed]
  --target=TARGET         configure for TARGET [TARGET=HOST]
Features and packages:
  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
  --x-includes=DIR        X include files are in DIR
  --x-libraries=DIR       X library files are in DIR
EOF
    if test -n "$ac_help"; then
      echo "--enable and --with options recognized:$ac_help"
    fi
    exit 0 ;;

  -host | --host | --hos | --ho)
    ac_prev=host ;;
  -host=* | --host=* | --hos=* | --ho=*)
    host="$ac_optarg" ;;

  -includedir | --includedir | --includedi | --included | --include \
  | --includ | --inclu | --incl | --inc)
    ac_prev=includedir ;;
  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
  | --includ=* | --inclu=* | --incl=* | --inc=*)
    includedir="$ac_optarg" ;;

  -infodir | --infodir | --infodi | --infod | --info | --inf)
    ac_prev=infodir ;;
  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
    infodir="$ac_optarg" ;;

  -libdir | --libdir | --libdi | --libd)
    ac_prev=libdir ;;
  -libdir=* | --libdir=* | --libdi=* | --libd=*)
    libdir="$ac_optarg" ;;

  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
  | --libexe | --libex | --libe)
    ac_prev=libexecdir ;;
  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
  | --libexe=* | --libex=* | --libe=*)
    libexecdir="$ac_optarg" ;;

  -localstatedir | --localstatedir | --localstatedi | --localstated \
  | --localstate | --localstat | --localsta | --localst \
  | --locals | --local | --loca | --loc | --lo)
    ac_prev=localstatedir ;;
  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
    localstatedir="$ac_optarg" ;;

  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
    ac_prev=mandir ;;
  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
    mandir="$ac_optarg" ;;

  -nfp | --nfp | --nf)
    # Obsolete; use --without-fp.
    with_fp=no ;;

  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
  | --no-cr | --no-c)
    no_create=yes ;;

  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
    no_recursion=yes ;;

  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
  | --oldin | --oldi | --old | --ol | --o)
    ac_prev=oldincludedir ;;
  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
    oldincludedir="$ac_optarg" ;;

  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
    ac_prev=prefix ;;
  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
    prefix="$ac_optarg" ;;

  -program-prefix | --program-prefix | --program-prefi | --program-pref \
  | --program-pre | --program-pr | --program-p)
    ac_prev=program_prefix ;;
  -program-prefix=* | --program-prefix=* | --program-prefi=* \
  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
    program_prefix="$ac_optarg" ;;

  -program-suffix | --program-suffix | --program-suffi | --program-suff \
  | --program-suf | --program-su | --program-s)
    ac_prev=program_suffix ;;
  -program-suffix=* | --program-suffix=* | --program-suffi=* \
  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
    program_suffix="$ac_optarg" ;;

  -program-transform-name | --program-transform-name \
  | --program-transform-nam | --program-transform-na \
  | --program-transform-n | --program-transform- \
  | --program-transform | --program-transfor \
  | --program-transfo | --program-transf \
  | --program-trans | --program-tran \
  | --progr-tra | --program-tr | --program-t)
    ac_prev=program_transform_name ;;
  -program-transform-name=* | --program-transform-name=* \
  | --program-transform-nam=* | --program-transform-na=* \
  | --program-transform-n=* | --program-transform-=* \
  | --program-transform=* | --program-transfor=* \
  | --program-transfo=* | --program-transf=* \
  | --program-trans=* | --program-tran=* \
  | --progr-tra=* | --program-tr=* | --program-t=*)
    program_transform_name="$ac_optarg" ;;

  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
  | -silent | --silent | --silen | --sile | --sil)
    silent=yes ;;

  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
    ac_prev=sbindir ;;
  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
  | --sbi=* | --sb=*)
    sbindir="$ac_optarg" ;;

  -sharedstatedir | --sharedstatedir | --sharedstatedi \
  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
  | --sharedst | --shareds | --shared | --share | --shar \
  | --sha | --sh)
    ac_prev=sharedstatedir ;;
  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
  | --sha=* | --sh=*)
    sharedstatedir="$ac_optarg" ;;

  -site | --site | --sit)
    ac_prev=site ;;
  -site=* | --site=* | --sit=*)
    site="$ac_optarg" ;;

  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
    ac_prev=srcdir ;;
  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
    srcdir="$ac_optarg" ;;

  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
  | --syscon | --sysco | --sysc | --sys | --sy)
    ac_prev=sysconfdir ;;
  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
    sysconfdir="$ac_optarg" ;;

  -target | --target | --targe | --targ | --tar | --ta | --t)
    ac_prev=target ;;
  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
    target="$ac_optarg" ;;

  -v | -verbose | --verbose | --verbos | --verbo | --verb)
    verbose=yes ;;

  -version | --version | --versio | --versi | --vers)
    echo "configure generated by autoconf version 2.13"
    exit 0 ;;

  -with-* | --with-*)
    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
    fi
    ac_package=`echo $ac_package| sed 's/-/_/g'`
    case "$ac_option" in
      *=*) ;;
      *) ac_optarg=yes ;;
    esac
    eval "with_${ac_package}='$ac_optarg'" ;;

  -without-* | --without-*)
    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
    fi
    ac_package=`echo $ac_package| sed 's/-/_/g'`
    eval "with_${ac_package}=no" ;;

  --x)
    # Obsolete; use --with-x.
    with_x=yes ;;

  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
  | --x-incl | --x-inc | --x-in | --x-i)
    ac_prev=x_includes ;;
  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
    x_includes="$ac_optarg" ;;

  -x-libraries | --x-libraries | --x-librarie | --x-librari \
  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
    ac_prev=x_libraries ;;
  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
    x_libraries="$ac_optarg" ;;

  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
    ;;

  *)
    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
      echo "configure: warning: $ac_option: invalid host type" 1>&2
    fi
    if test "x$nonopt" != xNONE; then
      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
    fi
    nonopt="$ac_option"
    ;;

  esac
done

if test -n "$ac_prev"; then
  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
fi

trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15

# File descriptor usage:
# 0 standard input
# 1 file creation
# 2 errors and warnings
# 3 some systems may open it to /dev/tty
# 4 used on the Kubota Titan
# 6 checking for... messages and results
# 5 compiler messages saved in config.log
if test "$silent" = yes; then
  exec 6>/dev/null
else
  exec 6>&1
fi
exec 5>./config.log

echo "\
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
" 1>&5

# Strip out --no-create and --no-recursion so they do not pile up.
# Also quote any args containing shell metacharacters.
ac_configure_args=
for ac_arg
do
  case "$ac_arg" in
  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
  | --no-cr | --no-c) ;;
  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
  esac
done

# NLS nuisances.
# Only set these to C if already set.  These must not be set unconditionally
# because not all systems understand e.g. LANG=C (notably SCO).
# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
# Non-C LC_CTYPE values break the ctype check.
if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi

# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
# AIX cpp loses on an empty file, so make sure it contains at least a newline.
echo > confdefs.h

# A filename unique to this package, relative to the directory that
# configure is in, which we can look for to find out if srcdir is correct.
ac_unique_file=mdct.c

# Find the source files, if location was not specified.
if test -z "$srcdir"; then
  ac_srcdir_defaulted=yes
  # Try the directory containing this script, then its parent.
  ac_prog=$0
  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
  srcdir=$ac_confdir
  if test ! -r $srcdir/$ac_unique_file; then
    srcdir=..
  fi
else
  ac_srcdir_defaulted=no
fi
if test ! -r $srcdir/$ac_unique_file; then
  if test "$ac_srcdir_defaulted" = yes; then
    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
  else
    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
  fi
fi
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`

# Prefer explicitly selected file to automatically selected ones.
if test -z "$CONFIG_SITE"; then
  if test "x$prefix" != xNONE; then
    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
  else
    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
  fi
fi
for ac_site_file in $CONFIG_SITE; do
  if test -r "$ac_site_file"; then
    echo "loading site script $ac_site_file"
    . "$ac_site_file"
  fi
done

if test -r "$cache_file"; then
  echo "loading cache $cache_file"
  . $cache_file
else
  echo "creating cache $cache_file"
  > $cache_file
fi

ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

ac_exeext=
ac_objext=o
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
    ac_n= ac_c='
' ac_t='	'
  else
    ac_n=-n ac_c= ac_t=
  fi
else
  ac_n= ac_c='\c' ac_t=
fi


ac_aux_dir=
for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
  if test -f $ac_dir/install-sh; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/install-sh -c"
    break
  elif test -f $ac_dir/install.sh; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/install.sh -c"
    break
  fi
done
if test -z "$ac_aux_dir"; then
  { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
fi
ac_config_guess=$ac_aux_dir/config.guess
ac_config_sub=$ac_aux_dir/config.sub
ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.

# Find a good install program.  We prefer a C program (faster),
# so one script is as good as another.  But avoid the broken or
# incompatible versions:
# SysV /etc/install, /usr/sbin/install
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
echo "configure:727: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
  for ac_dir in $PATH; do
    # Account for people who put trailing slashes in PATH elements.
    case "$ac_dir/" in
    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
    *)
      # OSF1 and SCO ODT 3.0 have their own names for install.
      # Don't use installbsd from OSF since it installs stuff as root
      # by default.
      for ac_prog in ginstall scoinst install; do
        if test -f $ac_dir/$ac_prog; then
	  if test $ac_prog = install &&
            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
	    # AIX install.  It has an incompatible calling convention.
	    :
	  else
	    ac_cv_path_install="$ac_dir/$ac_prog -c"
	    break 2
	  fi
	fi
      done
      ;;
    esac
  done
  IFS="$ac_save_IFS"

fi
  if test "${ac_cv_path_install+set}" = set; then
    INSTALL="$ac_cv_path_install"
  else
    # As a last resort, use the slow shell script.  We don't cache a
    # path for INSTALL within a source directory, because that will
    # break other packages using the cache if that directory is
    # removed, or if the path is relative.
    INSTALL="$ac_install_sh"
  fi
fi
echo "$ac_t""$INSTALL" 1>&6

# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'

test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'

test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'

echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
echo "configure:780: checking whether build environment is sane" >&5
# Just in case
sleep 1
echo timestamp > conftestfile
# Do `set' in a subshell so we don't clobber the current shell's
# arguments.  Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
   if test "$*" = "X"; then
      # -L didn't work.
      set X `ls -t $srcdir/configure conftestfile`
   fi
   if test "$*" != "X $srcdir/configure conftestfile" \
      && test "$*" != "X conftestfile $srcdir/configure"; then

      # If neither matched, then we have a broken ls.  This can happen
      # if, for instance, CONFIG_SHELL is bash and it inherits a
      # broken ls alias from the environment.  This has actually
      # happened.  Such a system could not be considered "sane".
      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
alias in your environment" 1>&2; exit 1; }
   fi

   test "$2" = conftestfile
   )
then
   # Ok.
   :
else
   { echo "configure: error: newly created file is older than distributed files!
Check your system clock" 1>&2; exit 1; }
fi
rm -f conftest*
echo "$ac_t""yes" 1>&6
if test "$program_transform_name" = s,x,x,; then
  program_transform_name=
else
  # Double any \ or $.  echo might interpret backslashes.
  cat <<\EOF_SED > conftestsed
s,\\,\\\\,g; s,\$,$$,g
EOF_SED
  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
  rm -f conftestsed
fi
test "$program_prefix" != NONE &&
  program_transform_name="s,^,${program_prefix},; $program_transform_name"
# Use a double $ so make ignores it.
test "$program_suffix" != NONE &&
  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"

# sed with no file args requires a program.
test "$program_transform_name" = "" && program_transform_name="s,x,x,"

echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
echo "configure:837: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftestmake <<\EOF
all:
	@echo 'ac_maketemp="${MAKE}"'
EOF
# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
if test -n "$ac_maketemp"; then
  eval ac_cv_prog_make_${ac_make}_set=yes
else
  eval ac_cv_prog_make_${ac_make}_set=no
fi
rm -f conftestmake
fi
if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  SET_MAKE=
else
  echo "$ac_t""no" 1>&6
  SET_MAKE="MAKE=${MAKE-make}"
fi


PACKAGE=libvorbisidec

VERSION=1.0.2

if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
fi
cat >> confdefs.h <<EOF
#define PACKAGE "$PACKAGE"
EOF

cat >> confdefs.h <<EOF
#define VERSION "$VERSION"
EOF



missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
echo "configure:883: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf.  Sigh.
if (aclocal --version) < /dev/null > /dev/null 2>&1; then
   ACLOCAL=aclocal
   echo "$ac_t""found" 1>&6
else
   ACLOCAL="$missing_dir/missing aclocal"
   echo "$ac_t""missing" 1>&6
fi

echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
echo "configure:896: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf.  Sigh.
if (autoconf --version) < /dev/null > /dev/null 2>&1; then
   AUTOCONF=autoconf
   echo "$ac_t""found" 1>&6
else
   AUTOCONF="$missing_dir/missing autoconf"
   echo "$ac_t""missing" 1>&6
fi

echo $ac_n "checking for working automake""... $ac_c" 1>&6
echo "configure:909: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf.  Sigh.
if (automake --version) < /dev/null > /dev/null 2>&1; then
   AUTOMAKE=automake
   echo "$ac_t""found" 1>&6
else
   AUTOMAKE="$missing_dir/missing automake"
   echo "$ac_t""missing" 1>&6
fi

echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
echo "configure:922: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf.  Sigh.
if (autoheader --version) < /dev/null > /dev/null 2>&1; then
   AUTOHEADER=autoheader
   echo "$ac_t""found" 1>&6
else
   AUTOHEADER="$missing_dir/missing autoheader"
   echo "$ac_t""missing" 1>&6
fi

echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
echo "configure:935: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf.  Sigh.
if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
   MAKEINFO=makeinfo
   echo "$ac_t""found" 1>&6
else
   MAKEINFO="$missing_dir/missing makeinfo"
   echo "$ac_t""missing" 1>&6
fi




V_LIB_CURRENT=1
V_LIB_REVISION=0
V_LIB_AGE=2





cflags_save="$CFLAGS"
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:962: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_CC="gcc"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

if test -z "$CC"; then
  # Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:992: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_prog_rejected=no
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
        ac_prog_rejected=yes
	continue
      fi
      ac_cv_prog_CC="cc"
      break
    fi
  done
  IFS="$ac_save_ifs"
if test $ac_prog_rejected = yes; then
  # We found a bogon in the path, so make sure we never use it.
  set dummy $ac_cv_prog_CC
  shift
  if test $# -gt 0; then
    # We chose a different compiler from the bogus one.
    # However, it has the same basename, so the bogon will be chosen
    # first if we set CC to just the basename; use the full file name.
    shift
    set dummy "$ac_dir/$ac_word" "$@"
    shift
    ac_cv_prog_CC="$@"
  fi
fi
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  if test -z "$CC"; then
    case "`uname -s`" in
    *win32* | *WIN32*)
      # Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1043: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_CC="cl"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi
 ;;
    esac
  fi
  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi

echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
echo "configure:1075: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5

ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

cat > conftest.$ac_ext << EOF

#line 1086 "configure"
#include "confdefs.h"

main(){return(0);}
EOF
if { (eval echo configure:1091: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  ac_cv_prog_cc_works=yes
  # If we can't run a trivial program, we are probably using a cross compiler.
  if (./conftest; exit) 2>/dev/null; then
    ac_cv_prog_cc_cross=no
  else
    ac_cv_prog_cc_cross=yes
  fi
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  ac_cv_prog_cc_works=no
fi
rm -fr conftest*
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
if test $ac_cv_prog_cc_works = no; then
  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
echo "configure:1117: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross

echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
echo "configure:1122: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.c <<EOF
#ifdef __GNUC__
  yes;
#endif
EOF
if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1131: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
  ac_cv_prog_gcc=yes
else
  ac_cv_prog_gcc=no
fi
fi

echo "$ac_t""$ac_cv_prog_gcc" 1>&6

if test $ac_cv_prog_gcc = yes; then
  GCC=yes
else
  GCC=
fi

ac_test_CFLAGS="${CFLAGS+set}"
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
echo "configure:1150: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  echo 'void f(){}' > conftest.c
if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
  ac_cv_prog_cc_g=yes
else
  ac_cv_prog_cc_g=no
fi
rm -f conftest*

fi

echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
if test "$ac_test_CFLAGS" = set; then
  CFLAGS="$ac_save_CFLAGS"
elif test $ac_cv_prog_cc_g = yes; then
  if test "$GCC" = yes; then
    CFLAGS="-g -O2"
  else
    CFLAGS="-g"
  fi
else
  if test "$GCC" = yes; then
    CFLAGS="-O2"
  else
    CFLAGS=
  fi
fi

echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
echo "configure:1182: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
  CPP=
fi
if test -z "$CPP"; then
if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
    # This must be in double quotes, not single quotes, because CPP may get
  # substituted into the Makefile and "${CC-cc}" will confuse make.
  CPP="${CC-cc} -E"
  # On the NeXT, cc -E runs the code through the compiler's parser,
  # not just through cpp.
  cat > conftest.$ac_ext <<EOF
#line 1197 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1203: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CPP="${CC-cc} -E -traditional-cpp"
  cat > conftest.$ac_ext <<EOF
#line 1214 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1220: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CPP="${CC-cc} -nologo -E"
  cat > conftest.$ac_ext <<EOF
#line 1231 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1237: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CPP=/lib/cpp
fi
rm -f conftest*
fi
rm -f conftest*
fi
rm -f conftest*
  ac_cv_prog_CPP="$CPP"
fi
  CPP="$ac_cv_prog_CPP"
else
  ac_cv_prog_CPP="$CPP"
fi
echo "$ac_t""$CPP" 1>&6

CFLAGS="$cflags_save"

# Find the correct PATH separator.  Usually this is `:', but
# DJGPP uses `;' like DOS.
if test "X${PATH_SEPARATOR+set}" != Xset; then
  UNAME=${UNAME-`uname 2>/dev/null`}
  case X$UNAME in
    *-DOS) lt_cv_sys_path_separator=';' ;;
    *)     lt_cv_sys_path_separator=':' ;;
  esac
  PATH_SEPARATOR=$lt_cv_sys_path_separator
fi

echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
echo "configure:1275: checking for Cygwin environment" >&5
if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 1280 "configure"
#include "confdefs.h"

int main() {

#ifndef __CYGWIN__
#define __CYGWIN__ __CYGWIN32__
#endif
return __CYGWIN__;
; return 0; }
EOF
if { (eval echo configure:1291: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  ac_cv_cygwin=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_cygwin=no
fi
rm -f conftest*
rm -f conftest*
fi

echo "$ac_t""$ac_cv_cygwin" 1>&6
CYGWIN=
test "$ac_cv_cygwin" = yes && CYGWIN=yes
echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
echo "configure:1308: checking for mingw32 environment" >&5
if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 1313 "configure"
#include "confdefs.h"

int main() {
return __MINGW32__;
; return 0; }
EOF
if { (eval echo configure:1320: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  ac_cv_mingw32=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_mingw32=no
fi
rm -f conftest*
rm -f conftest*
fi

echo "$ac_t""$ac_cv_mingw32" 1>&6
MINGW32=
test "$ac_cv_mingw32" = yes && MINGW32=yes
# Check whether --enable-shared or --disable-shared was given.
if test "${enable_shared+set}" = set; then
  enableval="$enable_shared"
  p=${PACKAGE-default}
case $enableval in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
  enable_shared=no
  # Look at the argument we got.  We use all the common list separators.
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
  for pkg in $enableval; do
    if test "X$pkg" = "X$p"; then
      enable_shared=yes
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
else
  enable_shared=yes
fi

# Check whether --enable-static or --disable-static was given.
if test "${enable_static+set}" = set; then
  enableval="$enable_static"
  p=${PACKAGE-default}
case $enableval in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
  enable_static=no
  # Look at the argument we got.  We use all the common list separators.
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
  for pkg in $enableval; do
    if test "X$pkg" = "X$p"; then
      enable_static=yes
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
else
  enable_static=yes
fi

# Check whether --enable-fast-install or --disable-fast-install was given.
if test "${enable_fast_install+set}" = set; then
  enableval="$enable_fast_install"
  p=${PACKAGE-default}
case $enableval in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
  enable_fast_install=no
  # Look at the argument we got.  We use all the common list separators.
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
  for pkg in $enableval; do
    if test "X$pkg" = "X$p"; then
      enable_fast_install=yes
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
else
  enable_fast_install=yes
fi


# Make sure we can run config.sub.
if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi

echo $ac_n "checking host system type""... $ac_c" 1>&6
echo "configure:1412: checking host system type" >&5

host_alias=$host
case "$host_alias" in
NONE)
  case $nonopt in
  NONE)
    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
    fi ;;
  *) host_alias=$nonopt ;;
  esac ;;
esac

host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6

echo $ac_n "checking build system type""... $ac_c" 1>&6
echo "configure:1433: checking build system type" >&5

build_alias=$build
case "$build_alias" in
NONE)
  case $nonopt in
  NONE) build_alias=$host_alias ;;
  *) build_alias=$nonopt ;;
  esac ;;
esac

build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$build" 1>&6

# Check whether --with-gnu-ld or --without-gnu-ld was given.
if test "${with_gnu_ld+set}" = set; then
  withval="$with_gnu_ld"
  test "$withval" = no || with_gnu_ld=yes
else
  with_gnu_ld=no
fi

ac_prog=ld
if test "$GCC" = yes; then
  # Check if gcc -print-prog-name=ld gives a path.
  echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
echo "configure:1462: checking for ld used by GCC" >&5
  case $host in
  *-*-mingw*)
    # gcc leaves a trailing carriage return which upsets mingw
    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
  *)
    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
  esac
  case $ac_prog in
    # Accept absolute paths.
    [\\/]* | [A-Za-z]:[\\/]*)
      re_direlt='/[^/][^/]*/\.\./'
      # Canonicalize the path of ld
      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
      done
      test -z "$LD" && LD="$ac_prog"
      ;;
  "")
    # If it fails, then pretend we aren't using GCC.
    ac_prog=ld
    ;;
  *)
    # If it is relative, then search for the first ld in PATH.
    with_gnu_ld=unknown
    ;;
  esac
elif test "$with_gnu_ld" = yes; then
  echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
echo "configure:1492: checking for GNU ld" >&5
else
  echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
echo "configure:1495: checking for non-GNU ld" >&5
fi
if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -z "$LD"; then
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
  for ac_dir in $PATH; do
    test -z "$ac_dir" && ac_dir=.
    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
      lt_cv_path_LD="$ac_dir/$ac_prog"
      # Check to see if the program is GNU ld.  I'd rather use --version,
      # but apparently some GNU ld's only accept -v.
      # Break only if it was the GNU/non-GNU ld that we prefer.
      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
	test "$with_gnu_ld" != no && break
      else
	test "$with_gnu_ld" != yes && break
      fi
    fi
  done
  IFS="$ac_save_ifs"
else
  lt_cv_path_LD="$LD" # Let the user override the test with a path.
fi
fi

LD="$lt_cv_path_LD"
if test -n "$LD"; then
  echo "$ac_t""$LD" 1>&6
else
  echo "$ac_t""no" 1>&6
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
echo "configure:1530: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
  lt_cv_prog_gnu_ld=yes
else
  lt_cv_prog_gnu_ld=no
fi
fi

echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6
with_gnu_ld=$lt_cv_prog_gnu_ld


echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
echo "configure:1547: checking for $LD option to reload object files" >&5
if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  lt_cv_ld_reload_flag='-r'
fi

echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
reload_flag=$lt_cv_ld_reload_flag
test -n "$reload_flag" && reload_flag=" $reload_flag"

echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
echo "configure:1559: checking for BSD-compatible nm" >&5
if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$NM"; then
  # Let the user override the test.
  lt_cv_path_NM="$NM"
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
    test -z "$ac_dir" && ac_dir=.
    tmp_nm=$ac_dir/${ac_tool_prefix}nm
    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
      # Check to see if the nm accepts a BSD-compat flag.
      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
      #   nm: unknown option "B" ignored
      # Tru64's nm complains that /dev/null is an invalid object file
      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
	lt_cv_path_NM="$tmp_nm -B"
	break
      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
	lt_cv_path_NM="$tmp_nm -p"
	break
      else
	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
	continue # so that we can try to find one that supports BSD flags
      fi
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
fi
fi

NM="$lt_cv_path_NM"
echo "$ac_t""$NM" 1>&6

echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
echo "configure:1597: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  rm -f conftestdata
if ln -s X conftestdata 2>/dev/null
then
  rm -f conftestdata
  ac_cv_prog_LN_S="ln -s"
else
  ac_cv_prog_LN_S=ln
fi
fi
LN_S="$ac_cv_prog_LN_S"
if test "$ac_cv_prog_LN_S" = "ln -s"; then
  echo "$ac_t""yes" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
echo "configure:1618: checking how to recognise dependant libraries" >&5
if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=
lt_cv_deplibs_check_method='unknown'
# Need to set the preceding variable on all platforms that support
# interlibrary dependencies.
# 'none' -- dependencies not supported.
# `unknown' -- same as none, but documents that we really don't know.
# 'pass_all' -- all dependencies passed with no checks.
# 'test_compile' -- check by making test program.
# 'file_magic [[regex]]' -- check by looking for files in library path
# which responds to the $file_magic_cmd with a given egrep regex.
# If you have `file' or equivalent on your system and you're not sure
# whether `pass_all' will *always* work, you probably want this one.

case $host_os in
aix4* | aix5*)
  lt_cv_deplibs_check_method=pass_all
  ;;

beos*)
  lt_cv_deplibs_check_method=pass_all
  ;;

bsdi4*)
  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
  lt_cv_file_magic_cmd='/usr/bin/file -L'
  lt_cv_file_magic_test_file=/shlib/libc.so
  ;;

cygwin* | mingw* | pw32*)
  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
  lt_cv_file_magic_cmd='$OBJDUMP -f'
  ;;

darwin* | rhapsody*)
  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
  lt_cv_file_magic_cmd='/usr/bin/file -L'
  case "$host_os" in
  rhapsody* | darwin1.[012])
    lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1`
    ;;
  *) # Darwin 1.3 on
    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
    ;;
  esac
  ;;

freebsd*)
  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
    case $host_cpu in
    i*86 )
      # Not sure whether the presence of OpenBSD here was a mistake.
      # Let's accept both of them until this is cleared up.
      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
      lt_cv_file_magic_cmd=/usr/bin/file
      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
      ;;
    esac
  else
    lt_cv_deplibs_check_method=pass_all
  fi
  ;;

gnu*)
  lt_cv_deplibs_check_method=pass_all
  ;;

hpux10.20*|hpux11*)
  lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
  lt_cv_file_magic_cmd=/usr/bin/file
  lt_cv_file_magic_test_file=/usr/lib/libc.sl
  ;;

irix5* | irix6* | nonstopux*)
  case $host_os in
  irix5* | nonstopux*)
    # this will be overridden with pass_all, but let us keep it just in case
    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
    ;;
  *)
    case $LD in
    *-32|*"-32 ") libmagic=32-bit;;
    *-n32|*"-n32 ") libmagic=N32;;
    *-64|*"-64 ") libmagic=64-bit;;
    *) libmagic=never-match;;
    esac
    # this will be overridden with pass_all, but let us keep it just in case
    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
    ;;
  esac
  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
  lt_cv_deplibs_check_method=pass_all
  ;;

# This must be Linux ELF.
linux-gnu*)
  lt_cv_deplibs_check_method=pass_all
  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
  ;;

netbsd*)
  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
  else
    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
  fi
  ;;

newos6*)
  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
  lt_cv_file_magic_cmd=/usr/bin/file
  lt_cv_file_magic_test_file=/usr/lib/libnls.so
  ;;

openbsd*)
  lt_cv_file_magic_cmd=/usr/bin/file
  lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'
  else
    lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
  fi
  ;;

osf3* | osf4* | osf5*)
  # this will be overridden with pass_all, but let us keep it just in case
  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
  lt_cv_file_magic_test_file=/shlib/libc.so
  lt_cv_deplibs_check_method=pass_all
  ;;

sco3.2v5*)
  lt_cv_deplibs_check_method=pass_all
  ;;

solaris*)
  lt_cv_deplibs_check_method=pass_all
  lt_cv_file_magic_test_file=/lib/libc.so
  ;;

sysv5uw[78]* | sysv4*uw2*)
  lt_cv_deplibs_check_method=pass_all
  ;;

sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
  case $host_vendor in
  motorola)
    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
    ;;
  ncr)
    lt_cv_deplibs_check_method=pass_all
    ;;
  sequent)
    lt_cv_file_magic_cmd='/bin/file'
    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
    ;;
  sni)
    lt_cv_file_magic_cmd='/bin/file'
    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
    lt_cv_file_magic_test_file=/lib/libc.so
    ;;
  esac
  ;;
esac

fi

echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
file_magic_cmd=$lt_cv_file_magic_cmd
deplibs_check_method=$lt_cv_deplibs_check_method

echo $ac_n "checking for object suffix""... $ac_c" 1>&6
echo "configure:1795: checking for object suffix" >&5
if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  rm -f conftest*
echo 'int i = 1;' > conftest.$ac_ext
if { (eval echo configure:1801: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  for ac_file in conftest.*; do
    case $ac_file in
    *.c) ;;
    *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
    esac
  done
else
  { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
fi
rm -f conftest*
fi

echo "$ac_t""$ac_cv_objext" 1>&6
OBJEXT=$ac_cv_objext
ac_objext=$ac_cv_objext



echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
echo "configure:1821: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
  ac_cv_exeext=.exe
else
  rm -f conftest*
  echo 'int main () { return 0; }' > conftest.$ac_ext
  ac_cv_exeext=
  if { (eval echo configure:1831: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
    for file in conftest.*; do
      case $file in
      *.$ac_ext | *.c | *.o | *.obj) ;;
      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
      esac
    done
  else
    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
  fi
  rm -f conftest*
  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
fi
fi

EXEEXT=""
test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
echo "$ac_t""${ac_cv_exeext}" 1>&6
ac_exeext=$EXEEXT

if test $host != $build; then
  ac_tool_prefix=${host_alias}-
else
  ac_tool_prefix=
fi




# Check for command to grab the raw symbol name followed by C symbol from nm.
echo $ac_n "checking command to parse $NM output""... $ac_c" 1>&6
echo "configure:1862: checking command to parse $NM output" >&5
if eval "test \"`echo '$''{'lt_cv_sys_global_symbol_pipe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
# These are sane defaults that work on at least a few old systems.
# [They come from Ultrix.  What could be older than Ultrix?!! ;)]

# Character class describing NM global symbol codes.
symcode='[BCDEGRST]'

# Regexp to match symbols that can be accessed directly from C.
sympat='\([_A-Za-z][_A-Za-z0-9]*\)'

# Transform the above into a raw symbol and a C symbol.
symxfrm='\1 \2\3 \3'

# Transform an extracted symbol line into a proper C declaration
lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"

# Transform an extracted symbol line into symbol name and symbol address
lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"

# Define system-specific variables.
case $host_os in
aix*)
  symcode='[BCDT]'
  ;;
cygwin* | mingw* | pw32*)
  symcode='[ABCDGISTW]'
  ;;
hpux*) # Its linker distinguishes data from code symbols
  lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
  lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
  ;;
irix* | nonstopux*)
  symcode='[BCDEGRST]'
  ;;
solaris* | sysv5*)
  symcode='[BDT]'
  ;;
sysv4)
  symcode='[DFNSTU]'
  ;;
esac

# Handle CRLF in mingw tool chain
opt_cr=
case $host_os in
mingw*)
  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
  ;;
esac

# If we're using GNU nm, then use its standard symbol codes.
if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
  symcode='[ABCDGISTW]'
fi

# Try without a prefix undercore, then with it.
for ac_symprfx in "" "_"; do

  # Write the raw and C identifiers.
lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ 	]\($symcode$symcode*\)[ 	][ 	]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"

  # Check to see that the pipe works correctly.
  pipe_works=no
  rm -f conftest*
  cat > conftest.$ac_ext <<EOF
#ifdef __cplusplus
extern "C" {
#endif
char nm_test_var;
void nm_test_func(){}
#ifdef __cplusplus
}
#endif
int main(){nm_test_var='a';nm_test_func();return(0);}
EOF

  if { (eval echo configure:1942: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
    # Now try to grab the symbols.
    nlist=conftest.nm
    if { (eval echo configure:1945: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5; } && test -s "$nlist"; then
      # Try sorting and uniquifying the output.
      if sort "$nlist" | uniq > "$nlist"T; then
	mv -f "$nlist"T "$nlist"
      else
	rm -f "$nlist"T
      fi

      # Make sure that we snagged all the symbols we need.
      if egrep ' nm_test_var$' "$nlist" >/dev/null; then
	if egrep ' nm_test_func$' "$nlist" >/dev/null; then
	  cat <<EOF > conftest.$ac_ext
#ifdef __cplusplus
extern "C" {
#endif

EOF
	  # Now generate the symbol file.
	  eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext'

	  cat <<EOF >> conftest.$ac_ext
#if defined (__STDC__) && __STDC__
# define lt_ptr void *
#else
# define lt_ptr char *
# define const
#endif

/* The mapping between symbol names and symbols. */
const struct {
  const char *name;
  lt_ptr address;
}
lt_preloaded_symbols[] =
{
EOF
	  sed "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext
	  cat <<\EOF >> conftest.$ac_ext
  {0, (lt_ptr) 0}
};

#ifdef __cplusplus
}
#endif
EOF
	  # Now try linking the two files.
	  mv conftest.$ac_objext conftstm.$ac_objext
	  save_LIBS="$LIBS"
	  save_CFLAGS="$CFLAGS"
	  LIBS="conftstm.$ac_objext"
	  CFLAGS="$CFLAGS$no_builtin_flag"
	  if { (eval echo configure:1996: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
	    pipe_works=yes
	  fi
	  LIBS="$save_LIBS"
	  CFLAGS="$save_CFLAGS"
	else
	  echo "cannot find nm_test_func in $nlist" >&5
	fi
      else
	echo "cannot find nm_test_var in $nlist" >&5
      fi
    else
      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
    fi
  else
    echo "$progname: failed program was:" >&5
    cat conftest.$ac_ext >&5
  fi
  rm -f conftest* conftst*

  # Do not use the global_symbol_pipe unless it works.
  if test "$pipe_works" = yes; then
    break
  else
    lt_cv_sys_global_symbol_pipe=
  fi
done

fi

global_symbol_pipe="$lt_cv_sys_global_symbol_pipe"
if test -z "$lt_cv_sys_global_symbol_pipe"; then
  global_symbol_to_cdecl=
  global_symbol_to_c_name_address=
else
  global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl"
  global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address"
fi
if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address";
then
  echo "$ac_t""failed" 1>&6
else
  echo "$ac_t""ok" 1>&6
fi

for ac_hdr in dlfcn.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:2045: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2050 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:2055: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done





# Only perform the check for file, if the check method requires it
case $deplibs_check_method in
file_magic*)
  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
    echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
echo "configure:2090: checking for ${ac_tool_prefix}file" >&5
if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case $MAGIC_CMD in
  /*)
  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
  ;;
  ?:/*)
  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
  ;;
  *)
  ac_save_MAGIC_CMD="$MAGIC_CMD"
  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="/usr/bin:$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/${ac_tool_prefix}file; then
      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
      if test -n "$file_magic_test_file"; then
	case $deplibs_check_method in
	"file_magic "*)
	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
	    egrep "$file_magic_regex" > /dev/null; then
	    :
	  else
	    cat <<EOF 1>&2

*** Warning: the command libtool uses to detect shared libraries,
*** $file_magic_cmd, produces output that libtool cannot recognize.
*** The result is that libtool may fail to recognize shared libraries
*** as such.  This will affect the creation of libtool libraries that
*** depend on shared libraries, but programs linked with such libtool
*** libraries will work regardless of this problem.  Nevertheless, you
*** may want to report the problem to your system manager and/or to
*** bug-libtool@gnu.org

EOF
	  fi ;;
	esac
      fi
      break
    fi
  done
  IFS="$ac_save_ifs"
  MAGIC_CMD="$ac_save_MAGIC_CMD"
  ;;
esac
fi

MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if test -n "$MAGIC_CMD"; then
  echo "$ac_t""$MAGIC_CMD" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

if test -z "$lt_cv_path_MAGIC_CMD"; then
  if test -n "$ac_tool_prefix"; then
    echo $ac_n "checking for file""... $ac_c" 1>&6
echo "configure:2152: checking for file" >&5
if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case $MAGIC_CMD in
  /*)
  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
  ;;
  ?:/*)
  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
  ;;
  *)
  ac_save_MAGIC_CMD="$MAGIC_CMD"
  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="/usr/bin:$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/file; then
      lt_cv_path_MAGIC_CMD="$ac_dir/file"
      if test -n "$file_magic_test_file"; then
	case $deplibs_check_method in
	"file_magic "*)
	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
	    egrep "$file_magic_regex" > /dev/null; then
	    :
	  else
	    cat <<EOF 1>&2

*** Warning: the command libtool uses to detect shared libraries,
*** $file_magic_cmd, produces output that libtool cannot recognize.
*** The result is that libtool may fail to recognize shared libraries
*** as such.  This will affect the creation of libtool libraries that
*** depend on shared libraries, but programs linked with such libtool
*** libraries will work regardless of this problem.  Nevertheless, you
*** may want to report the problem to your system manager and/or to
*** bug-libtool@gnu.org

EOF
	  fi ;;
	esac
      fi
      break
    fi
  done
  IFS="$ac_save_ifs"
  MAGIC_CMD="$ac_save_MAGIC_CMD"
  ;;
esac
fi

MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if test -n "$MAGIC_CMD"; then
  echo "$ac_t""$MAGIC_CMD" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  else
    MAGIC_CMD=:
  fi
fi

  fi
  ;;
esac

# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2223: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$RANLIB"; then
  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
RANLIB="$ac_cv_prog_RANLIB"
if test -n "$RANLIB"; then
  echo "$ac_t""$RANLIB" 1>&6
else
  echo "$ac_t""no" 1>&6
fi


if test -z "$ac_cv_prog_RANLIB"; then
if test -n "$ac_tool_prefix"; then
  # Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2255: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$RANLIB"; then
  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_RANLIB="ranlib"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
fi
fi
RANLIB="$ac_cv_prog_RANLIB"
if test -n "$RANLIB"; then
  echo "$ac_t""$RANLIB" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

else
  RANLIB=":"
fi
fi

# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2290: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$STRIP"; then
  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_STRIP="${ac_tool_prefix}strip"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
STRIP="$ac_cv_prog_STRIP"
if test -n "$STRIP"; then
  echo "$ac_t""$STRIP" 1>&6
else
  echo "$ac_t""no" 1>&6
fi


if test -z "$ac_cv_prog_STRIP"; then
if test -n "$ac_tool_prefix"; then
  # Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2322: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$STRIP"; then
  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_STRIP="strip"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
fi
fi
STRIP="$ac_cv_prog_STRIP"
if test -n "$STRIP"; then
  echo "$ac_t""$STRIP" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

else
  STRIP=":"
fi
fi


enable_dlopen=no
enable_win32_dll=no

# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
if test "${enable_libtool_lock+set}" = set; then
  enableval="$enable_libtool_lock"
  :
fi

test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes

# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case $host in
*-*-irix6*)
  # Find out which ABI we are using.
  echo '#line 2371 "configure"' > conftest.$ac_ext
  if { (eval echo configure:2372: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
    case `/usr/bin/file conftest.$ac_objext` in
    *32-bit*)
      LD="${LD-ld} -32"
      ;;
    *N32*)
      LD="${LD-ld} -n32"
      ;;
    *64-bit*)
      LD="${LD-ld} -64"
      ;;
    esac
  fi
  rm -rf conftest*
  ;;

*-*-sco3.2v5*)
  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
  SAVE_CFLAGS="$CFLAGS"
  CFLAGS="$CFLAGS -belf"
  echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
echo "configure:2393: checking whether the C compiler needs -belf" >&5
if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
     ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

     cat > conftest.$ac_ext <<EOF
#line 2406 "configure"
#include "confdefs.h"

int main() {

; return 0; }
EOF
if { (eval echo configure:2413: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  lt_cv_cc_needs_belf=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  lt_cv_cc_needs_belf=no
fi
rm -f conftest*
     ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

fi

echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
    CFLAGS="$SAVE_CFLAGS"
  fi
  ;;


esac

# Sed substitution that helps us do robust quoting.  It backslashifies
# metacharacters that are still active within double-quoted strings.
Xsed='sed -e s/^X//'
sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'

# Same as above, but do not quote variable references.
double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'

# Sed substitution to delay expansion of an escaped shell variable in a
# double_quote_subst'ed string.
delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'

# Constants:
rm="rm -f"

# Global variables:
default_ofile=libtool
can_build_shared=yes

# All known linkers require a `.a' archive for static linking (except M$VC,
# which needs '.lib').
libext=a
ltmain="$ac_aux_dir/ltmain.sh"
ofile="$default_ofile"
with_gnu_ld="$lt_cv_prog_gnu_ld"
need_locks="$enable_libtool_lock"

old_CC="$CC"
old_CFLAGS="$CFLAGS"

# Set sane defaults for various variables
test -z "$AR" && AR=ar
test -z "$AR_FLAGS" && AR_FLAGS=cru
test -z "$AS" && AS=as
test -z "$CC" && CC=cc
test -z "$DLLTOOL" && DLLTOOL=dlltool
test -z "$LD" && LD=ld
test -z "$LN_S" && LN_S="ln -s"
test -z "$MAGIC_CMD" && MAGIC_CMD=file
test -z "$NM" && NM=nm
test -z "$OBJDUMP" && OBJDUMP=objdump
test -z "$RANLIB" && RANLIB=:
test -z "$STRIP" && STRIP=:
test -z "$ac_objext" && ac_objext=o

if test x"$host" != x"$build"; then
  ac_tool_prefix=${host_alias}-
else
  ac_tool_prefix=
fi

# Transform linux* to *-*-linux-gnu*, to support old configure scripts.
case $host_os in
linux-gnu*) ;;
linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
esac

case $host_os in
aix3*)
  # AIX sometimes has problems with the GCC collect2 program.  For some
  # reason, if we set the COLLECT_NAMES environment variable, the problems
  # vanish in a puff of smoke.
  if test "X${COLLECT_NAMES+set}" != Xset; then
    COLLECT_NAMES=
    export COLLECT_NAMES
  fi
  ;;
esac

# Determine commands to create old-style static archives.
old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
old_postinstall_cmds='chmod 644 $oldlib'
old_postuninstall_cmds=

if test -n "$RANLIB"; then
  case $host_os in
  openbsd*)
    old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
    ;;
  *)
    old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
    ;;
  esac
  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
fi

# Allow CC to be a program name with arguments.
set dummy $CC
compiler="$2"

echo $ac_n "checking for objdir""... $ac_c" 1>&6
echo "configure:2533: checking for objdir" >&5
rm -f .libs 2>/dev/null
mkdir .libs 2>/dev/null
if test -d .libs; then
  objdir=.libs
else
  # MS-DOS does not allow filenames that begin with a dot.
  objdir=_libs
fi
rmdir .libs 2>/dev/null
echo "$ac_t""$objdir" 1>&6


# Check whether --with-pic or --without-pic was given.
if test "${with_pic+set}" = set; then
  withval="$with_pic"
  pic_mode="$withval"
else
  pic_mode=default
fi

test -z "$pic_mode" && pic_mode=default

# We assume here that the value for lt_cv_prog_cc_pic will not be cached
# in isolation, and that seeing it set (from the cache) indicates that
# the associated values are set (in the cache) correctly too.
echo $ac_n "checking for $compiler option to produce PIC""... $ac_c" 1>&6
echo "configure:2560: checking for $compiler option to produce PIC" >&5
if eval "test \"`echo '$''{'lt_cv_prog_cc_pic'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
   lt_cv_prog_cc_pic=
  lt_cv_prog_cc_shlib=
  lt_cv_prog_cc_wl=
  lt_cv_prog_cc_static=
  lt_cv_prog_cc_no_builtin=
  lt_cv_prog_cc_can_build_shared=$can_build_shared

  if test "$GCC" = yes; then
    lt_cv_prog_cc_wl='-Wl,'
    lt_cv_prog_cc_static='-static'

    case $host_os in
    aix*)
      # Below there is a dirty hack to force normal static linking with -ldl
      # The problem is because libdl dynamically linked with both libc and
      # libC (AIX C++ library), which obviously doesn't included in libraries
      # list by gcc. This cause undefined symbols with -static flags.
      # This hack allows C programs to be linked with "-static -ldl", but
      # not sure about C++ programs.
      lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC"
      ;;
    amigaos*)
      # FIXME: we need at least 68020 code to build shared libraries, but
      # adding the `-m68020' flag to GCC prevents building anything better,
      # like `-m68040'.
      lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4'
      ;;
    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
      # PIC is the default for these OSes.
      ;;
    darwin* | rhapsody*)
      # PIC is the default on this platform
      # Common symbols not allowed in MH_DYLIB files
      lt_cv_prog_cc_pic='-fno-common'
      ;;
    cygwin* | mingw* | pw32* | os2*)
      # This hack is so that the source file can tell whether it is being
      # built for inclusion in a dll (and should export symbols for example).
      lt_cv_prog_cc_pic='-DDLL_EXPORT'
      ;;
    sysv4*MP*)
      if test -d /usr/nec; then
	 lt_cv_prog_cc_pic=-Kconform_pic
      fi
      ;;
    *)
      lt_cv_prog_cc_pic='-fPIC'
      ;;
    esac
  else
    # PORTME Check for PIC flags for the system compiler.
    case $host_os in
    aix3* | aix4* | aix5*)
      lt_cv_prog_cc_wl='-Wl,'
      # All AIX code is PIC.
      if test "$host_cpu" = ia64; then
	# AIX 5 now supports IA64 processor
	lt_cv_prog_cc_static='-Bstatic'
      else
	lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
      fi
      ;;

    hpux9* | hpux10* | hpux11*)
      # Is there a better lt_cv_prog_cc_static that works with the bundled CC?
      lt_cv_prog_cc_wl='-Wl,'
      lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive"
      lt_cv_prog_cc_pic='+Z'
      ;;

    irix5* | irix6* | nonstopux*)
      lt_cv_prog_cc_wl='-Wl,'
      lt_cv_prog_cc_static='-non_shared'
      # PIC (with -KPIC) is the default.
      ;;

    cygwin* | mingw* | pw32* | os2*)
      # This hack is so that the source file can tell whether it is being
      # built for inclusion in a dll (and should export symbols for example).
      lt_cv_prog_cc_pic='-DDLL_EXPORT'
      ;;

    newsos6)
      lt_cv_prog_cc_pic='-KPIC'
      lt_cv_prog_cc_static='-Bstatic'
      ;;

    osf3* | osf4* | osf5*)
      # All OSF/1 code is PIC.
      lt_cv_prog_cc_wl='-Wl,'
      lt_cv_prog_cc_static='-non_shared'
      ;;

    sco3.2v5*)
      lt_cv_prog_cc_pic='-Kpic'
      lt_cv_prog_cc_static='-dn'
      lt_cv_prog_cc_shlib='-belf'
      ;;

    solaris*)
      lt_cv_prog_cc_pic='-KPIC'
      lt_cv_prog_cc_static='-Bstatic'
      lt_cv_prog_cc_wl='-Wl,'
      ;;

    sunos4*)
      lt_cv_prog_cc_pic='-PIC'
      lt_cv_prog_cc_static='-Bstatic'
      lt_cv_prog_cc_wl='-Qoption ld '
      ;;

    sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
      lt_cv_prog_cc_pic='-KPIC'
      lt_cv_prog_cc_static='-Bstatic'
      if test "x$host_vendor" = xsni; then
	lt_cv_prog_cc_wl='-LD'
      else
	lt_cv_prog_cc_wl='-Wl,'
      fi
      ;;

    uts4*)
      lt_cv_prog_cc_pic='-pic'
      lt_cv_prog_cc_static='-Bstatic'
      ;;

    sysv4*MP*)
      if test -d /usr/nec ;then
	lt_cv_prog_cc_pic='-Kconform_pic'
	lt_cv_prog_cc_static='-Bstatic'
      fi
      ;;

    *)
      lt_cv_prog_cc_can_build_shared=no
      ;;
    esac
  fi

fi

if test -z "$lt_cv_prog_cc_pic"; then
  echo "$ac_t""none" 1>&6
else
  echo "$ac_t""$lt_cv_prog_cc_pic" 1>&6

  # Check to make sure the pic_flag actually works.
  echo $ac_n "checking if $compiler PIC flag $lt_cv_prog_cc_pic works""... $ac_c" 1>&6
echo "configure:2712: checking if $compiler PIC flag $lt_cv_prog_cc_pic works" >&5
  if eval "test \"`echo '$''{'lt_cv_prog_cc_pic_works'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
      save_CFLAGS="$CFLAGS"
    CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC"
    cat > conftest.$ac_ext <<EOF
#line 2719 "configure"
#include "confdefs.h"

int main() {

; return 0; }
EOF
if { (eval echo configure:2726: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
        case $host_os in
      hpux9* | hpux10* | hpux11*)
	# On HP-UX, both CC and GCC only warn that PIC is supported... then
	# they create non-PIC objects.  So, if there were any warnings, we
	# assume that PIC is not supported.
	if test -s conftest.err; then
	  lt_cv_prog_cc_pic_works=no
	else
	  lt_cv_prog_cc_pic_works=yes
	fi
	;;
      *)
	lt_cv_prog_cc_pic_works=yes
	;;
      esac
    
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
        lt_cv_prog_cc_pic_works=no
    
fi
rm -f conftest*
    CFLAGS="$save_CFLAGS"
  
fi


  if test "X$lt_cv_prog_cc_pic_works" = Xno; then
    lt_cv_prog_cc_pic=
    lt_cv_prog_cc_can_build_shared=no
  else
    lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic"
  fi

  echo "$ac_t""$lt_cv_prog_cc_pic_works" 1>&6
fi

# Check for any special shared library compilation flags.
if test -n "$lt_cv_prog_cc_shlib"; then
  echo "configure: warning: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" 1>&2
  if echo "$old_CC $old_CFLAGS " | egrep -e "[ 	]$lt_cv_prog_cc_shlib[ 	]" >/dev/null; then :
  else
   echo "configure: warning: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" 1>&2
    lt_cv_prog_cc_can_build_shared=no
  fi
fi

echo $ac_n "checking if $compiler static flag $lt_cv_prog_cc_static works""... $ac_c" 1>&6
echo "configure:2778: checking if $compiler static flag $lt_cv_prog_cc_static works" >&5
if eval "test \"`echo '$''{'lt_cv_prog_cc_static_works'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
    lt_cv_prog_cc_static_works=no
  save_LDFLAGS="$LDFLAGS"
  LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static"
  cat > conftest.$ac_ext <<EOF
#line 2786 "configure"
#include "confdefs.h"

int main() {

; return 0; }
EOF
if { (eval echo configure:2793: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  lt_cv_prog_cc_static_works=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
  LDFLAGS="$save_LDFLAGS"

fi


# Belt *and* braces to stop my trousers falling down:
test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static=
echo "$ac_t""$lt_cv_prog_cc_static_works" 1>&6

pic_flag="$lt_cv_prog_cc_pic"
special_shlib_compile_flags="$lt_cv_prog_cc_shlib"
wl="$lt_cv_prog_cc_wl"
link_static_flag="$lt_cv_prog_cc_static"
no_builtin_flag="$lt_cv_prog_cc_no_builtin"
can_build_shared="$lt_cv_prog_cc_can_build_shared"


# Check to see if options -o and -c are simultaneously supported by compiler
echo $ac_n "checking if $compiler supports -c -o file.$ac_objext""... $ac_c" 1>&6
echo "configure:2820: checking if $compiler supports -c -o file.$ac_objext" >&5
if eval "test \"`echo '$''{'lt_cv_compiler_c_o'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
$rm -r conftest 2>/dev/null
mkdir conftest
cd conftest
echo "int some_variable = 0;" > conftest.$ac_ext
mkdir out
# According to Tom Tromey, Ian Lance Taylor reported there are C compilers
# that will create temporary files in the current directory regardless of
# the output directory.  Thus, making CWD read-only will cause this test
# to fail, enabling locking or at least warning the user not to do parallel
# builds.
chmod -w .
save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"
compiler_c_o=no
if { (eval echo configure:2839: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
  # The compiler can only warn and ignore the option if not recognized
  # So say no if there are warnings
  if test -s out/conftest.err; then
    lt_cv_compiler_c_o=no
  else
    lt_cv_compiler_c_o=yes
  fi
else
  # Append any errors to the config.log.
  cat out/conftest.err 1>&5
  lt_cv_compiler_c_o=no
fi
CFLAGS="$save_CFLAGS"
chmod u+w .
$rm conftest* out/*
rmdir out
cd ..
rmdir conftest
$rm -r conftest 2>/dev/null

fi

compiler_c_o=$lt_cv_compiler_c_o
echo "$ac_t""$compiler_c_o" 1>&6

if test x"$compiler_c_o" = x"yes"; then
  # Check to see if we can write to a .lo
  echo $ac_n "checking if $compiler supports -c -o file.lo""... $ac_c" 1>&6
echo "configure:2868: checking if $compiler supports -c -o file.lo" >&5
  if eval "test \"`echo '$''{'lt_cv_compiler_o_lo'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
  lt_cv_compiler_o_lo=no
  save_CFLAGS="$CFLAGS"
  CFLAGS="$CFLAGS -c -o conftest.lo"
  save_objext="$ac_objext"
  ac_objext=lo
  cat > conftest.$ac_ext <<EOF
#line 2879 "configure"
#include "confdefs.h"

int main() {
int some_variable = 0;
; return 0; }
EOF
if { (eval echo configure:2886: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
      # The compiler can only warn and ignore the option if not recognized
    # So say no if there are warnings
    if test -s conftest.err; then
      lt_cv_compiler_o_lo=no
    else
      lt_cv_compiler_o_lo=yes
    fi
  
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
  ac_objext="$save_objext"
  CFLAGS="$save_CFLAGS"
  
fi

  compiler_o_lo=$lt_cv_compiler_o_lo
  echo "$ac_t""$compiler_o_lo" 1>&6
else
  compiler_o_lo=no
fi

# Check to see if we can do hard links to lock some files if needed
hard_links="nottested"
if test "$compiler_c_o" = no && test "$need_locks" != no; then
  # do not overwrite the value of need_locks provided by the user
  echo $ac_n "checking if we can lock with hard links""... $ac_c" 1>&6
echo "configure:2917: checking if we can lock with hard links" >&5
  hard_links=yes
  $rm conftest*
  ln conftest.a conftest.b 2>/dev/null && hard_links=no
  touch conftest.a
  ln conftest.a conftest.b 2>&5 || hard_links=no
  ln conftest.a conftest.b 2>/dev/null && hard_links=no
  echo "$ac_t""$hard_links" 1>&6
  if test "$hard_links" = no; then
    echo "configure: warning: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" 1>&2
    need_locks=warn
  fi
else
  need_locks=no
fi

if test "$GCC" = yes; then
  # Check to see if options -fno-rtti -fno-exceptions are supported by compiler
  echo $ac_n "checking if $compiler supports -fno-rtti -fno-exceptions""... $ac_c" 1>&6
echo "configure:2936: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
  echo "int some_variable = 0;" > conftest.$ac_ext
  save_CFLAGS="$CFLAGS"
  CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext"
  compiler_rtti_exceptions=no
  cat > conftest.$ac_ext <<EOF
#line 2942 "configure"
#include "confdefs.h"

int main() {
int some_variable = 0;
; return 0; }
EOF
if { (eval echo configure:2949: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
      # The compiler can only warn and ignore the option if not recognized
    # So say no if there are warnings
    if test -s conftest.err; then
      compiler_rtti_exceptions=no
    else
      compiler_rtti_exceptions=yes
    fi
  
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
  CFLAGS="$save_CFLAGS"
  echo "$ac_t""$compiler_rtti_exceptions" 1>&6

  if test "$compiler_rtti_exceptions" = "yes"; then
    no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
  else
    no_builtin_flag=' -fno-builtin'
  fi
fi

# See if the linker supports building shared libraries.
echo $ac_n "checking whether the linker ($LD) supports shared libraries""... $ac_c" 1>&6
echo "configure:2976: checking whether the linker ($LD) supports shared libraries" >&5

allow_undefined_flag=
no_undefined_flag=
need_lib_prefix=unknown
need_version=unknown
# when you set need_version to no, make sure it does not cause -set_version
# flags to be left without arguments
archive_cmds=
archive_expsym_cmds=
old_archive_from_new_cmds=
old_archive_from_expsyms_cmds=
export_dynamic_flag_spec=
whole_archive_flag_spec=
thread_safe_flag_spec=
hardcode_into_libs=no
hardcode_libdir_flag_spec=
hardcode_libdir_separator=
hardcode_direct=no
hardcode_minus_L=no
hardcode_shlibpath_var=unsupported
runpath_var=
link_all_deplibs=unknown
always_export_symbols=no
export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
# include_expsyms should be a list of space-separated symbols to be *always*
# included in the symbol list
include_expsyms=
# exclude_expsyms can be an egrep regular expression of symbols to exclude
# it will be wrapped by ` (' and `)$', so one must not match beginning or
# end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
# as well as any symbol that contains `d'.
exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
# platforms (ab)use it in PIC code, but their linkers get confused if
# the symbol is explicitly referenced.  Since portable code cannot
# rely on this symbol name, it's probably fine to never include it in
# preloaded symbol tables.
extract_expsyms_cmds=

case $host_os in
cygwin* | mingw* | pw32*)
  # FIXME: the MSVC++ port hasn't been tested in a loooong time
  # When not using gcc, we currently assume that we are using
  # Microsoft Visual C++.
  if test "$GCC" != yes; then
    with_gnu_ld=no
  fi
  ;;
openbsd*)
  with_gnu_ld=no
  ;;
esac

ld_shlibs=yes
if test "$with_gnu_ld" = yes; then
  # If archive_cmds runs LD, not CC, wlarc should be empty
  wlarc='${wl}'

  # See if GNU ld supports shared libraries.
  case $host_os in
  aix3* | aix4* | aix5*)
    # On AIX, the GNU linker is very broken
    # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available.
    ld_shlibs=no
    cat <<EOF 1>&2

*** Warning: the GNU linker, at least up to release 2.9.1, is reported
*** to be unable to reliably create shared libraries on AIX.
*** Therefore, libtool is disabling shared libraries support.  If you
*** really care for shared libraries, you may want to modify your PATH
*** so that a non-GNU linker is found, and then restart.

EOF
    ;;

  amigaos*)
    archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
    hardcode_libdir_flag_spec='-L$libdir'
    hardcode_minus_L=yes

    # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
    # that the semantics of dynamic libraries on AmigaOS, at least up
    # to version 4, is to share data among multiple programs linked
    # with the same dynamic library.  Since this doesn't match the
    # behavior of shared libraries on other platforms, we can use
    # them.
    ld_shlibs=no
    ;;

  beos*)
    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
      allow_undefined_flag=unsupported
      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
      # support --undefined.  This deserves some investigation.  FIXME
      archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
    else
      ld_shlibs=no
    fi
    ;;

  cygwin* | mingw* | pw32*)
    # hardcode_libdir_flag_spec is actually meaningless, as there is
    # no search path for DLLs.
    hardcode_libdir_flag_spec='-L$libdir'
    allow_undefined_flag=unsupported
    always_export_symbols=yes

    extract_expsyms_cmds='test -f $output_objdir/impgen.c || \
      sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~
      test -f $output_objdir/impgen.exe || (cd $output_objdir && \
      if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \
      else $CC -o impgen impgen.c ; fi)~
      $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def'

    old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib'

    # cygwin and mingw dlls have different entry points and sets of symbols
    # to exclude.
    # FIXME: what about values for MSVC?
    dll_entry=__cygwin_dll_entry@12
    dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~
    case $host_os in
    mingw*)
      # mingw values
      dll_entry=_DllMainCRTStartup@12
      dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~
      ;;
    esac

    # mingw and cygwin differ, and it's simplest to just exclude the union
    # of the two symbol sets.
    dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12

    # recent cygwin and mingw systems supply a stub DllMain which the user
    # can override, but on older systems we have to supply one (in ltdll.c)
    if test "x$lt_cv_need_dllmain" = "xyes"; then
      ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext "
      ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~
	test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
    else
      ltdll_obj=
      ltdll_cmds=
    fi

    # Extract the symbol export list from an `--export-all' def file,
    # then regenerate the def file from the symbol export list, so that
    # the compiled dll only exports the symbol export list.
    # Be careful not to strip the DATA tag left be newer dlltools.
    export_symbols_cmds="$ltdll_cmds"'
      $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~
      sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols'

    # If the export-symbols file already is a .def file (1st line
    # is EXPORTS), use it as is.
    # If DATA tags from a recent dlltool are present, honour them!
    archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then
	cp $export_symbols $output_objdir/$soname-def;
      else
	echo EXPORTS > $output_objdir/$soname-def;
	_lt_hint=1;
	cat $export_symbols | while read symbol; do
	 set dummy \$symbol;
	 case \$# in
	   2) echo "   \$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
	   *) echo "     \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;;
	 esac;
	 _lt_hint=`expr 1 + \$_lt_hint`;
	done;
      fi~
      '"$ltdll_cmds"'
      $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~
      $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~
      $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags'
    ;;

  netbsd*)
    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
      archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
      wlarc=
    else
      archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
      archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
    fi
    ;;

  solaris* | sysv5*)
    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
      ld_shlibs=no
      cat <<EOF 1>&2

*** Warning: The releases 2.8.* of the GNU linker cannot reliably
*** create shared libraries on Solaris systems.  Therefore, libtool
*** is disabling shared libraries support.  We urge you to upgrade GNU
*** binutils to release 2.9.1 or newer.  Another option is to modify
*** your PATH or compiler configuration so that the native linker is
*** used, and then restart.

EOF
    elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
      archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
    else
      ld_shlibs=no
    fi
    ;;

  sunos4*)
    archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
    wlarc=
    hardcode_direct=yes
    hardcode_shlibpath_var=no
    ;;

  *)
    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
      archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
    else
      ld_shlibs=no
    fi
    ;;
  esac

  if test "$ld_shlibs" = yes; then
    runpath_var=LD_RUN_PATH
    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
    export_dynamic_flag_spec='${wl}--export-dynamic'
    case $host_os in
    cygwin* | mingw* | pw32*)
      # dlltool doesn't understand --whole-archive et. al.
      whole_archive_flag_spec=
      ;;
    *)
      # ancient GNU ld didn't support --whole-archive et. al.
      if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
	whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
      else
	whole_archive_flag_spec=
      fi
      ;;
    esac
  fi
else
  # PORTME fill in a description of your system's linker (not GNU ld)
  case $host_os in
  aix3*)
    allow_undefined_flag=unsupported
    always_export_symbols=yes
    archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
    # Note: this linker hardcodes the directories in LIBPATH if there
    # are no directories specified by -L.
    hardcode_minus_L=yes
    if test "$GCC" = yes && test -z "$link_static_flag"; then
      # Neither direct hardcoding nor static linking is supported with a
      # broken collect2.
      hardcode_direct=unsupported
    fi
    ;;

  aix4* | aix5*)
    if test "$host_cpu" = ia64; then
      # On IA64, the linker does run time linking by default, so we don't
      # have to do anything special.
      aix_use_runtimelinking=no
      exp_sym_flag='-Bexport'
      no_entry_flag=""
    else
      aix_use_runtimelinking=no

      # Test if we are trying to use run time linking or normal
      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
      # need to do runtime linking.
      case $host_os in aix4.[23]|aix4.[23].*|aix5*)
	for ld_flag in $LDFLAGS; do
	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
	    aix_use_runtimelinking=yes
	    break
	  fi
	done
      esac

      exp_sym_flag='-bexport'
      no_entry_flag='-bnoentry'
    fi

    # When large executables or shared objects are built, AIX ld can
    # have problems creating the table of contents.  If linking a library
    # or program results in "error TOC overflow" add -mminimal-toc to
    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.

    hardcode_direct=yes
    archive_cmds=''
    hardcode_libdir_separator=':'
    if test "$GCC" = yes; then
      case $host_os in aix4.[012]|aix4.[012].*)
	collect2name=`${CC} -print-prog-name=collect2`
	if test -f "$collect2name" && \
	  strings "$collect2name" | grep resolve_lib_name >/dev/null
	then
	  # We have reworked collect2
	  hardcode_direct=yes
	else
	  # We have old collect2
	  hardcode_direct=unsupported
	  # It fails to find uninstalled libraries when the uninstalled
	  # path is not listed in the libpath.  Setting hardcode_minus_L
	  # to unsupported forces relinking
	  hardcode_minus_L=yes
	  hardcode_libdir_flag_spec='-L$libdir'
	  hardcode_libdir_separator=
	fi
      esac

      shared_flag='-shared'
    else
      # not using gcc
      if test "$host_cpu" = ia64; then
	shared_flag='${wl}-G'
      else
	if test "$aix_use_runtimelinking" = yes; then
	  shared_flag='${wl}-G'
	else
	  shared_flag='${wl}-bM:SRE'
	fi
      fi
    fi

    # It seems that -bexpall can do strange things, so it is better to
    # generate a list of symbols to export.
    always_export_symbols=yes
    if test "$aix_use_runtimelinking" = yes; then
      # Warning - without using the other runtime loading flags (-brtl),
      # -berok will link without error, but may produce a broken library.
      allow_undefined_flag='-berok'
      hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
      archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
    else
      if test "$host_cpu" = ia64; then
	hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
	allow_undefined_flag="-z nodefs"
	archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
      else
	hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib'
	# Warning - without using the other run time loading flags,
	# -berok will link without error, but may produce a broken library.
	allow_undefined_flag='${wl}-berok'
	# This is a bit strange, but is similar to how AIX traditionally builds
	# it's shared libraries.
	archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname'
      fi
    fi
    ;;

  amigaos*)
    archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
    hardcode_libdir_flag_spec='-L$libdir'
    hardcode_minus_L=yes
    # see comment about different semantics on the GNU ld section
    ld_shlibs=no
    ;;

  cygwin* | mingw* | pw32*)
    # When not using gcc, we currently assume that we are using
    # Microsoft Visual C++.
    # hardcode_libdir_flag_spec is actually meaningless, as there is
    # no search path for DLLs.
    hardcode_libdir_flag_spec=' '
    allow_undefined_flag=unsupported
    # Tell ltmain to make .lib files, not .a files.
    libext=lib
    # FIXME: Setting linknames here is a bad hack.
    archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
    # The linker will automatically build a .lib file if we build a DLL.
    old_archive_from_new_cmds='true'
    # FIXME: Should let the user specify the lib program.
    old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
    fix_srcfile_path='`cygpath -w "$srcfile"`'
    ;;

  darwin* | rhapsody*)
    case "$host_os" in
    rhapsody* | darwin1.[012])
      allow_undefined_flag='-undefined suppress'
      ;;
    *) # Darwin 1.3 on
      allow_undefined_flag='-flat_namespace -undefined suppress'
      ;;
    esac
    # FIXME: Relying on posixy $() will cause problems for
    #        cross-compilation, but unfortunately the echo tests do not
    #        yet detect zsh echo's removal of \ escapes.  Also zsh mangles
    #	     `"' quotes if we put them in here... so don't!
    archive_cmds='$nonopt $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring'
    # We need to add '_' to the symbols in $export_symbols first
    #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols'
    hardcode_direct=yes
    hardcode_shlibpath_var=no
    whole_archive_flag_spec='-all_load $convenience'
    ;;

  freebsd1*)
    ld_shlibs=no
    ;;

  # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
  # support.  Future versions do this automatically, but an explicit c++rt0.o
  # does not break anything, and helps significantly (at the cost of a little
  # extra space).
  freebsd2.2*)
    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
    hardcode_libdir_flag_spec='-R$libdir'
    hardcode_direct=yes
    hardcode_shlibpath_var=no
    ;;

  # Unfortunately, older versions of FreeBSD 2 do not have this feature.
  freebsd2*)
    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
    hardcode_direct=yes
    hardcode_minus_L=yes
    hardcode_shlibpath_var=no
    ;;

  # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
  freebsd*)
    archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
    hardcode_libdir_flag_spec='-R$libdir'
    hardcode_direct=yes
    hardcode_shlibpath_var=no
    ;;

  hpux9* | hpux10* | hpux11*)
    case $host_os in
    hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;;
    *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;;
    esac
    hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
    hardcode_libdir_separator=:
    hardcode_direct=yes
    hardcode_minus_L=yes # Not in the search PATH, but as the default
			 # location of the library.
    export_dynamic_flag_spec='${wl}-E'
    ;;

  irix5* | irix6* | nonstopux*)
    if test "$GCC" = yes; then
      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
    else
      archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
    fi
    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
    hardcode_libdir_separator=:
    link_all_deplibs=yes
    ;;

  netbsd*)
    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
    else
      archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
    fi
    hardcode_libdir_flag_spec='-R$libdir'
    hardcode_direct=yes
    hardcode_shlibpath_var=no
    ;;

  newsos6)
    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
    hardcode_direct=yes
    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
    hardcode_libdir_separator=:
    hardcode_shlibpath_var=no
    ;;

  openbsd*)
    hardcode_direct=yes
    hardcode_shlibpath_var=no
    if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
      archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags'
      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
      export_dynamic_flag_spec='${wl}-E'
    else
      case "$host_os" in
      openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
	hardcode_libdir_flag_spec='-R$libdir'
        ;;
      *)
        archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags'
        hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
        ;;
      esac
    fi
    ;;

  os2*)
    hardcode_libdir_flag_spec='-L$libdir'
    hardcode_minus_L=yes
    allow_undefined_flag=unsupported
    archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
    old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
    ;;

  osf3*)
    if test "$GCC" = yes; then
      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
    else
      allow_undefined_flag=' -expect_unresolved \*'
      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
    fi
    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
    hardcode_libdir_separator=:
    ;;

  osf4* | osf5*)	# as osf3* with the addition of -msym flag
    if test "$GCC" = yes; then
      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
    else
      allow_undefined_flag=' -expect_unresolved \*'
      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
      archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
      $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'

      #Both c and cxx compiler support -rpath directly
      hardcode_libdir_flag_spec='-rpath $libdir'
    fi
    hardcode_libdir_separator=:
    ;;

  sco3.2v5*)
    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
    hardcode_shlibpath_var=no
    runpath_var=LD_RUN_PATH
    hardcode_runpath_var=yes
    export_dynamic_flag_spec='${wl}-Bexport'
    ;;

  solaris*)
    # gcc --version < 3.0 without binutils cannot create self contained
    # shared libraries reliably, requiring libgcc.a to resolve some of
    # the object symbols generated in some cases.  Libraries that use
    # assert need libgcc.a to resolve __eprintf, for example.  Linking
    # a copy of libgcc.a into every shared library to guarantee resolving
    # such symbols causes other problems:  According to Tim Van Holder
    # <tim.van.holder@pandora.be>, C++ libraries end up with a separate
    # (to the application) exception stack for one thing.
    no_undefined_flag=' -z defs'
    if test "$GCC" = yes; then
      case `$CC --version 2>/dev/null` in
      [12].*)
	cat <<EOF 1>&2

*** Warning: Releases of GCC earlier than version 3.0 cannot reliably
*** create self contained shared libraries on Solaris systems, without
*** introducing a dependency on libgcc.a.  Therefore, libtool is disabling
*** -no-undefined support, which will at least allow you to build shared
*** libraries.  However, you may find that when you link such libraries
*** into an application without using GCC, you have to manually add
*** \`gcc --print-libgcc-file-name\` to the link command.  We urge you to
*** upgrade to a newer version of GCC.  Another option is to rebuild your
*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer.

EOF
        no_undefined_flag=
	;;
      esac
    fi
    # $CC -shared without GNU ld will not create a library from C++
    # object files and a static libstdc++, better avoid it by now
    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
    hardcode_libdir_flag_spec='-R$libdir'
    hardcode_shlibpath_var=no
    case $host_os in
    solaris2.[0-5] | solaris2.[0-5].*) ;;
    *) # Supported since Solaris 2.6 (maybe 2.5.1?)
      whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
    esac
    link_all_deplibs=yes
    ;;

  sunos4*)
    if test "x$host_vendor" = xsequent; then
      # Use $CC to link under sequent, because it throws in some extra .o
      # files that make .init and .fini sections work.
      archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
    else
      archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
    fi
    hardcode_libdir_flag_spec='-L$libdir'
    hardcode_direct=yes
    hardcode_minus_L=yes
    hardcode_shlibpath_var=no
    ;;

  sysv4)
    if test "x$host_vendor" = xsno; then
      archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags'
      hardcode_direct=yes # is this really true???
    else
      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
      hardcode_direct=no #Motorola manual says yes, but my tests say they lie
    fi
    runpath_var='LD_RUN_PATH'
    hardcode_shlibpath_var=no
    ;;

  sysv4.3*)
    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
    hardcode_shlibpath_var=no
    export_dynamic_flag_spec='-Bexport'
    ;;

  sysv5*)
    no_undefined_flag=' -z text'
    # $CC -shared without GNU ld will not create a library from C++
    # object files and a static libstdc++, better avoid it by now
    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
    hardcode_libdir_flag_spec=
    hardcode_shlibpath_var=no
    runpath_var='LD_RUN_PATH'
    ;;

  uts4*)
    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
    hardcode_libdir_flag_spec='-L$libdir'
    hardcode_shlibpath_var=no
    ;;

  dgux*)
    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
    hardcode_libdir_flag_spec='-L$libdir'
    hardcode_shlibpath_var=no
    ;;

  sysv4*MP*)
    if test -d /usr/nec; then
      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
      hardcode_shlibpath_var=no
      runpath_var=LD_RUN_PATH
      hardcode_runpath_var=yes
      ld_shlibs=yes
    fi
    ;;

  sysv4.2uw2*)
    archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
    hardcode_direct=yes
    hardcode_minus_L=no
    hardcode_shlibpath_var=no
    hardcode_runpath_var=yes
    runpath_var=LD_RUN_PATH
    ;;

  sysv5uw7* | unixware7*)
    no_undefined_flag='${wl}-z ${wl}text'
    if test "$GCC" = yes; then
      archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
    else
      archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
    fi
    runpath_var='LD_RUN_PATH'
    hardcode_shlibpath_var=no
    ;;

  *)
    ld_shlibs=no
    ;;
  esac
fi
echo "$ac_t""$ld_shlibs" 1>&6
test "$ld_shlibs" = no && can_build_shared=no

# Check hardcoding attributes.
echo $ac_n "checking how to hardcode library paths into programs""... $ac_c" 1>&6
echo "configure:3661: checking how to hardcode library paths into programs" >&5
hardcode_action=
if test -n "$hardcode_libdir_flag_spec" || \
   test -n "$runpath_var"; then

  # We can hardcode non-existant directories.
  if test "$hardcode_direct" != no &&
     # If the only mechanism to avoid hardcoding is shlibpath_var, we
     # have to relink, otherwise we might link with an installed library
     # when we should be linking with a yet-to-be-installed one
     ## test "$hardcode_shlibpath_var" != no &&
     test "$hardcode_minus_L" != no; then
    # Linking always hardcodes the temporary library directory.
    hardcode_action=relink
  else
    # We can link without hardcoding, and we can hardcode nonexisting dirs.
    hardcode_action=immediate
  fi
else
  # We cannot hardcode anything, or else we can only hardcode existing
  # directories.
  hardcode_action=unsupported
fi
echo "$ac_t""$hardcode_action" 1>&6

striplib=
old_striplib=
echo $ac_n "checking whether stripping libraries is possible""... $ac_c" 1>&6
echo "configure:3689: checking whether stripping libraries is possible" >&5
if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
  echo "$ac_t""yes" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

reload_cmds='$LD$reload_flag -o $output$reload_objs'
test -z "$deplibs_check_method" && deplibs_check_method=unknown

# PORTME Fill in your ld.so characteristics
echo $ac_n "checking dynamic linker characteristics""... $ac_c" 1>&6
echo "configure:3703: checking dynamic linker characteristics" >&5
library_names_spec=
libname_spec='lib$name'
soname_spec=
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
finish_eval=
shlibpath_var=
shlibpath_overrides_runpath=unknown
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"

case $host_os in
aix3*)
  version_type=linux
  library_names_spec='${libname}${release}.so$versuffix $libname.a'
  shlibpath_var=LIBPATH

  # AIX has no versioning support, so we append a major version to the name.
  soname_spec='${libname}${release}.so$major'
  ;;

aix4* | aix5*)
  version_type=linux
  if test "$host_cpu" = ia64; then
    # AIX 5 supports IA64
    library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so'
    shlibpath_var=LD_LIBRARY_PATH
  else
    # With GCC up to 2.95.x, collect2 would create an import file
    # for dependence libraries.  The import file would start with
    # the line `#! .'.  This would cause the generated library to
    # depend on `.', always an invalid library.  This was fixed in
    # development snapshots of GCC prior to 3.0.
    case $host_os in
      aix4 | aix4.[01] | aix4.[01].*)
	if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
	     echo ' yes '
	     echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
	  :
	else
	  can_build_shared=no
	fi
	;;
    esac
    # AIX (on Power*) has no versioning support, so currently we can
    # not hardcode correct soname into executable. Probably we can
    # add versioning support to collect2, so additional links can
    # be useful in future.
    if test "$aix_use_runtimelinking" = yes; then
      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
      # instead of lib<name>.a to let people know that these are not
      # typical AIX shared libraries.
      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
    else
      # We preserve .a as extension for shared libraries through AIX4.2
      # and later when we are not doing run time linking.
      library_names_spec='${libname}${release}.a $libname.a'
      soname_spec='${libname}${release}.so$major'
    fi
    shlibpath_var=LIBPATH
  fi
  ;;

amigaos*)
  library_names_spec='$libname.ixlibrary $libname.a'
  # Create ${libname}_ixlibrary.a entries in /sys/libs.
  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
  ;;

beos*)
  library_names_spec='${libname}.so'
  dynamic_linker="$host_os ld.so"
  shlibpath_var=LIBRARY_PATH
  ;;

bsdi4*)
  version_type=linux
  need_version=no
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
  export_dynamic_flag_spec=-rdynamic
  # the default ld.so.conf also contains /usr/contrib/lib and
  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
  # libtool to hard-code these into programs
  ;;

cygwin* | mingw* | pw32*)
  version_type=windows
  need_version=no
  need_lib_prefix=no
  case $GCC,$host_os in
  yes,cygwin*)
    library_names_spec='$libname.dll.a'
    soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
    postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~
      dldir=$destdir/`dirname \$dlpath`~
      test -d \$dldir || mkdir -p \$dldir~
      $install_prog .libs/$dlname \$dldir/$dlname'
    postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~
      dlpath=$dir/\$dldll~
       $rm \$dlpath'
    ;;
  yes,mingw*)
    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
    sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"`
    ;;
  yes,pw32*)
    library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/./-/g'`${versuffix}.dll'
    ;;
  *)
    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib'
    ;;
  esac
  dynamic_linker='Win32 ld.exe'
  # FIXME: first we should search . and the directory the executable is in
  shlibpath_var=PATH
  ;;

darwin* | rhapsody*)
  dynamic_linker="$host_os dyld"
  version_type=darwin
  need_lib_prefix=no
  need_version=no
  # FIXME: Relying on posixy $() will cause problems for
  #        cross-compilation, but unfortunately the echo tests do not
  #        yet detect zsh echo's removal of \ escapes.
  library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)'
  soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)'
  shlibpath_overrides_runpath=yes
  shlibpath_var=DYLD_LIBRARY_PATH
  ;;

freebsd1*)
  dynamic_linker=no
  ;;

freebsd*)
  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
  version_type=freebsd-$objformat
  case $version_type in
    freebsd-elf*)
      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
      need_version=no
      need_lib_prefix=no
      ;;
    freebsd-*)
      library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
      need_version=yes
      ;;
  esac
  shlibpath_var=LD_LIBRARY_PATH
  case $host_os in
  freebsd2*)
    shlibpath_overrides_runpath=yes
    ;;
  *)
    shlibpath_overrides_runpath=no
    hardcode_into_libs=yes
    ;;
  esac
  ;;

gnu*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
  soname_spec='${libname}${release}.so$major'
  shlibpath_var=LD_LIBRARY_PATH
  hardcode_into_libs=yes
  ;;

hpux9* | hpux10* | hpux11*)
  # Give a soname corresponding to the major version so that dld.sl refuses to
  # link against other versions.
  dynamic_linker="$host_os dld.sl"
  version_type=sunos
  need_lib_prefix=no
  need_version=no
  shlibpath_var=SHLIB_PATH
  shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
  library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
  soname_spec='${libname}${release}.sl$major'
  # HP-UX runs *really* slowly unless shared libraries are mode 555.
  postinstall_cmds='chmod 555 $lib'
  ;;

irix5* | irix6* | nonstopux*)
  case $host_os in
    nonstopux*) version_type=nonstopux ;;
    *)          version_type=irix ;;
  esac
  need_lib_prefix=no
  need_version=no
  soname_spec='${libname}${release}.so$major'
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so'
  case $host_os in
  irix5* | nonstopux*)
    libsuff= shlibsuff=
    ;;
  *)
    case $LD in # libtool.m4 will add one of these switches to LD
    *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
    *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
    *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
    *) libsuff= shlibsuff= libmagic=never-match;;
    esac
    ;;
  esac
  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
  shlibpath_overrides_runpath=no
  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
  ;;

# No shared lib support for Linux oldld, aout, or coff.
linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
  dynamic_linker=no
  ;;

# This must be Linux ELF.
linux-gnu*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=no
  # This implies no fast_install, which is unacceptable.
  # Some rework will be needed to allow for fast_install
  # before this can be enabled.
  hardcode_into_libs=yes

  # We used to test for /lib/ld.so.1 and disable shared libraries on
  # powerpc, because MkLinux only supported shared libraries with the
  # GNU dynamic linker.  Since this was broken with cross compilers,
  # most powerpc-linux boxes support dynamic linking these days and
  # people can always --disable-shared, the test was removed, and we
  # assume the GNU/Linux dynamic linker is in use.
  dynamic_linker='GNU/Linux ld.so'
  ;;

netbsd*)
  version_type=sunos
  need_lib_prefix=no
  need_version=no
  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
    library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
    dynamic_linker='NetBSD (a.out) ld.so'
  else
    library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
    soname_spec='${libname}${release}.so$major'
    dynamic_linker='NetBSD ld.elf_so'
  fi
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  hardcode_into_libs=yes
  ;;

newsos6)
  version_type=linux
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  ;;

openbsd*)
  version_type=sunos
  need_lib_prefix=no
  need_version=no
  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
    case "$host_os" in
    openbsd2.[89] | openbsd2.[89].*)
      shlibpath_overrides_runpath=no
      ;;
    *)
      shlibpath_overrides_runpath=yes
      ;;
    esac
  else
    shlibpath_overrides_runpath=yes
  fi
  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  ;;

os2*)
  libname_spec='$name'
  need_lib_prefix=no
  library_names_spec='$libname.dll $libname.a'
  dynamic_linker='OS/2 ld.exe'
  shlibpath_var=LIBPATH
  ;;

osf3* | osf4* | osf5*)
  version_type=osf
  need_version=no
  need_lib_prefix=no
  soname_spec='${libname}${release}.so'
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
  shlibpath_var=LD_LIBRARY_PATH
  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
  ;;

sco3.2v5*)
  version_type=osf
  soname_spec='${libname}${release}.so$major'
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  shlibpath_var=LD_LIBRARY_PATH
  ;;

solaris*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  hardcode_into_libs=yes
  # ldd complains unless libraries are executable
  postinstall_cmds='chmod +x $lib'
  ;;

sunos4*)
  version_type=sunos
  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  if test "$with_gnu_ld" = yes; then
    need_lib_prefix=no
  fi
  need_version=yes
  ;;

sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
  version_type=linux
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  shlibpath_var=LD_LIBRARY_PATH
  case $host_vendor in
    sni)
      shlibpath_overrides_runpath=no
      ;;
    motorola)
      need_lib_prefix=no
      need_version=no
      shlibpath_overrides_runpath=no
      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
      ;;
  esac
  ;;

uts4*)
  version_type=linux
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  shlibpath_var=LD_LIBRARY_PATH
  ;;

dgux*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  shlibpath_var=LD_LIBRARY_PATH
  ;;

sysv4*MP*)
  if test -d /usr/nec ;then
    version_type=linux
    library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
    soname_spec='$libname.so.$major'
    shlibpath_var=LD_LIBRARY_PATH
  fi
  ;;

*)
  dynamic_linker=no
  ;;
esac
echo "$ac_t""$dynamic_linker" 1>&6
test "$dynamic_linker" = no && can_build_shared=no

# Report the final consequences.
echo $ac_n "checking if libtool supports shared libraries""... $ac_c" 1>&6
echo "configure:4104: checking if libtool supports shared libraries" >&5
echo "$ac_t""$can_build_shared" 1>&6

echo $ac_n "checking whether to build shared libraries""... $ac_c" 1>&6
echo "configure:4108: checking whether to build shared libraries" >&5
test "$can_build_shared" = "no" && enable_shared=no

# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case "$host_os" in
aix3*)
  test "$enable_shared" = yes && enable_static=no
  if test -n "$RANLIB"; then
    archive_cmds="$archive_cmds~\$RANLIB \$lib"
    postinstall_cmds='$RANLIB $lib'
  fi
  ;;

aix4*)
  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
    test "$enable_shared" = yes && enable_static=no
  fi
  ;;
esac
echo "$ac_t""$enable_shared" 1>&6

echo $ac_n "checking whether to build static libraries""... $ac_c" 1>&6
echo "configure:4131: checking whether to build static libraries" >&5
# Make sure either enable_shared or enable_static is yes.
test "$enable_shared" = yes || enable_static=yes
echo "$ac_t""$enable_static" 1>&6

if test "$hardcode_action" = relink; then
  # Fast installation is not supported
  enable_fast_install=no
elif test "$shlibpath_overrides_runpath" = yes ||
     test "$enable_shared" = no; then
  # Fast installation is not necessary
  enable_fast_install=needless
fi

variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
if test "$GCC" = yes; then
  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi

if test "x$enable_dlopen" != xyes; then
  enable_dlopen=unknown
  enable_dlopen_self=unknown
  enable_dlopen_self_static=unknown
else
  lt_cv_dlopen=no
  lt_cv_dlopen_libs=

  case $host_os in
  beos*)
    lt_cv_dlopen="load_add_on"
    lt_cv_dlopen_libs=
    lt_cv_dlopen_self=yes
    ;;

  cygwin* | mingw* | pw32*)
    lt_cv_dlopen="LoadLibrary"
    lt_cv_dlopen_libs=
   ;;

  *)
    echo $ac_n "checking for shl_load""... $ac_c" 1>&6
echo "configure:4172: checking for shl_load" >&5
if eval "test \"`echo '$''{'ac_cv_func_shl_load'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 4177 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char shl_load(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char shl_load();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_shl_load) || defined (__stub___shl_load)
choke me
#else
shl_load();
#endif

; return 0; }
EOF
if { (eval echo configure:4200: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_shl_load=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_shl_load=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'shl_load`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  lt_cv_dlopen="shl_load"
else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6
echo "configure:4218: checking for shl_load in -ldld" >&5
ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ldld  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4226 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char shl_load();

int main() {
shl_load()
; return 0; }
EOF
if { (eval echo configure:4237: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for dlopen""... $ac_c" 1>&6
echo "configure:4256: checking for dlopen" >&5
if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 4261 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char dlopen(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char dlopen();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_dlopen) || defined (__stub___dlopen)
choke me
#else
dlopen();
#endif

; return 0; }
EOF
if { (eval echo configure:4284: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_dlopen=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_dlopen=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'dlopen`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  lt_cv_dlopen="dlopen"
else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
echo "configure:4302: checking for dlopen in -ldl" >&5
ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ldl  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4310 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char dlopen();

int main() {
dlopen()
; return 0; }
EOF
if { (eval echo configure:4321: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for dlopen in -lsvld""... $ac_c" 1>&6
echo "configure:4340: checking for dlopen in -lsvld" >&5
ac_lib_var=`echo svld'_'dlopen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lsvld  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4348 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char dlopen();

int main() {
dlopen()
; return 0; }
EOF
if { (eval echo configure:4359: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for dld_link in -ldld""... $ac_c" 1>&6
echo "configure:4378: checking for dld_link in -ldld" >&5
ac_lib_var=`echo dld'_'dld_link | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ldld  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4386 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char dld_link();

int main() {
dld_link()
; return 0; }
EOF
if { (eval echo configure:4397: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
else
  echo "$ac_t""no" 1>&6
fi

	      
fi

	    
fi

	  
fi

	
fi

      
fi

    ;;
  esac

  if test "x$lt_cv_dlopen" != xno; then
    enable_dlopen=yes
  else
    enable_dlopen=no
  fi

  case $lt_cv_dlopen in
  dlopen)
    save_CPPFLAGS="$CPPFLAGS"
        test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"

    save_LDFLAGS="$LDFLAGS"
    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"

    save_LIBS="$LIBS"
    LIBS="$lt_cv_dlopen_libs $LIBS"

    echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6
echo "configure:4453: checking whether a program can dlopen itself" >&5
if eval "test \"`echo '$''{'lt_cv_dlopen_self'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  	  if test "$cross_compiling" = yes; then :
  lt_cv_dlopen_self=cross
else
    lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
  lt_status=$lt_dlunknown
  cat > conftest.$ac_ext <<EOF
#line 4463 "configure"
#include "confdefs.h"

#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif

#include <stdio.h>

#ifdef RTLD_GLOBAL
#  define LT_DLGLOBAL		RTLD_GLOBAL
#else
#  ifdef DL_GLOBAL
#    define LT_DLGLOBAL		DL_GLOBAL
#  else
#    define LT_DLGLOBAL		0
#  endif
#endif

/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
   find out it does not work in some platform. */
#ifndef LT_DLLAZY_OR_NOW
#  ifdef RTLD_LAZY
#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
#  else
#    ifdef DL_LAZY
#      define LT_DLLAZY_OR_NOW		DL_LAZY
#    else
#      ifdef RTLD_NOW
#        define LT_DLLAZY_OR_NOW	RTLD_NOW
#      else
#        ifdef DL_NOW
#          define LT_DLLAZY_OR_NOW	DL_NOW
#        else
#          define LT_DLLAZY_OR_NOW	0
#        endif
#      endif
#    endif
#  endif
#endif

#ifdef __cplusplus
extern "C" void exit (int);
#endif

void fnord() { int i=42;}
int main ()
{
  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
  int status = $lt_dlunknown;

  if (self)
    {
      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
      /* dlclose (self); */
    }

    exit (status);
}
EOF
  if { (eval echo configure:4524: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} 2>/dev/null; then
    (./conftest; exit; ) 2>/dev/null
    lt_status=$?
    case x$lt_status in
      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
      x$lt_unknown|x*) lt_cv_dlopen_self=no ;;
    esac
  else :
    # compilation failed
    lt_cv_dlopen_self=no
  fi
fi
rm -fr conftest*

    
fi

echo "$ac_t""$lt_cv_dlopen_self" 1>&6

    if test "x$lt_cv_dlopen_self" = xyes; then
      LDFLAGS="$LDFLAGS $link_static_flag"
      echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6
echo "configure:4547: checking whether a statically linked program can dlopen itself" >&5
if eval "test \"`echo '$''{'lt_cv_dlopen_self_static'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  	  if test "$cross_compiling" = yes; then :
  lt_cv_dlopen_self_static=cross
else
    lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
  lt_status=$lt_dlunknown
  cat > conftest.$ac_ext <<EOF
#line 4557 "configure"
#include "confdefs.h"

#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif

#include <stdio.h>

#ifdef RTLD_GLOBAL
#  define LT_DLGLOBAL		RTLD_GLOBAL
#else
#  ifdef DL_GLOBAL
#    define LT_DLGLOBAL		DL_GLOBAL
#  else
#    define LT_DLGLOBAL		0
#  endif
#endif

/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
   find out it does not work in some platform. */
#ifndef LT_DLLAZY_OR_NOW
#  ifdef RTLD_LAZY
#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
#  else
#    ifdef DL_LAZY
#      define LT_DLLAZY_OR_NOW		DL_LAZY
#    else
#      ifdef RTLD_NOW
#        define LT_DLLAZY_OR_NOW	RTLD_NOW
#      else
#        ifdef DL_NOW
#          define LT_DLLAZY_OR_NOW	DL_NOW
#        else
#          define LT_DLLAZY_OR_NOW	0
#        endif
#      endif
#    endif
#  endif
#endif

#ifdef __cplusplus
extern "C" void exit (int);
#endif

void fnord() { int i=42;}
int main ()
{
  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
  int status = $lt_dlunknown;

  if (self)
    {
      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
      /* dlclose (self); */
    }

    exit (status);
}
EOF
  if { (eval echo configure:4618: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} 2>/dev/null; then
    (./conftest; exit; ) 2>/dev/null
    lt_status=$?
    case x$lt_status in
      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
      x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;;
    esac
  else :
    # compilation failed
    lt_cv_dlopen_self_static=no
  fi
fi
rm -fr conftest*

      
fi

echo "$ac_t""$lt_cv_dlopen_self_static" 1>&6
    fi

    CPPFLAGS="$save_CPPFLAGS"
    LDFLAGS="$save_LDFLAGS"
    LIBS="$save_LIBS"
    ;;
  esac

  case $lt_cv_dlopen_self in
  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
  *) enable_dlopen_self=unknown ;;
  esac

  case $lt_cv_dlopen_self_static in
  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
  *) enable_dlopen_self_static=unknown ;;
  esac
fi


if test "$enable_shared" = yes && test "$GCC" = yes; then
  case $archive_cmds in
  *'~'*)
    # FIXME: we may have to deal with multi-command sequences.
    ;;
  '$CC '*)
    # Test whether the compiler implicitly links with -lc since on some
    # systems, -lgcc has to come before -lc. If gcc already passes -lc
    # to ld, don't add -lc before -lgcc.
    echo $ac_n "checking whether -lc should be explicitly linked in""... $ac_c" 1>&6
echo "configure:4667: checking whether -lc should be explicitly linked in" >&5
    if eval "test \"`echo '$''{'lt_cv_archive_cmds_need_lc'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  $rm conftest*
    echo 'static int dummy;' > conftest.$ac_ext

    if { (eval echo configure:4674: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
      soname=conftest
      lib=conftest
      libobjs=conftest.$ac_objext
      deplibs=
      wl=$lt_cv_prog_cc_wl
      compiler_flags=-v
      linker_flags=-v
      verstring=
      output_objdir=.
      libname=conftest
      save_allow_undefined_flag=$allow_undefined_flag
      allow_undefined_flag=
      if { (eval echo configure:4687: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\") 1>&5; (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5; }
      then
	lt_cv_archive_cmds_need_lc=no
      else
	lt_cv_archive_cmds_need_lc=yes
      fi
      allow_undefined_flag=$save_allow_undefined_flag
    else
      cat conftest.err 1>&5
    fi
fi

    echo "$ac_t""$lt_cv_archive_cmds_need_lc" 1>&6
    ;;
  esac
fi
need_lc=${lt_cv_archive_cmds_need_lc-yes}

# The second clause should only fire when bootstrapping the
# libtool distribution, otherwise you forgot to ship ltmain.sh
# with your package, and you will get complaints that there are
# no rules to generate ltmain.sh.
if test -f "$ltmain"; then
  :
else
  # If there is no Makefile yet, we rely on a make rule to execute
  # `config.status --recheck' to rerun these tests and create the
  # libtool script then.
  test -f Makefile && make "$ltmain"
fi

if test -f "$ltmain"; then
  trap "$rm \"${ofile}T\"; exit 1" 1 2 15
  $rm -f "${ofile}T"

  echo creating $ofile

  # Now quote all the things that may contain metacharacters while being
  # careful not to overquote the AC_SUBSTed values.  We take copies of the
  # variables and quote the copies for generation of the libtool script.
  for var in echo old_CC old_CFLAGS \
    AR AR_FLAGS CC LD LN_S NM SHELL \
    reload_flag reload_cmds wl \
    pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
    thread_safe_flag_spec whole_archive_flag_spec libname_spec \
    library_names_spec soname_spec \
    RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \
    old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \
    postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \
    old_striplib striplib file_magic_cmd export_symbols_cmds \
    deplibs_check_method allow_undefined_flag no_undefined_flag \
    finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
    global_symbol_to_c_name_address \
    hardcode_libdir_flag_spec hardcode_libdir_separator  \
    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
    compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do

    case $var in
    reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \
    old_postinstall_cmds | old_postuninstall_cmds | \
    export_symbols_cmds | archive_cmds | archive_expsym_cmds | \
    extract_expsyms_cmds | old_archive_from_expsyms_cmds | \
    postinstall_cmds | postuninstall_cmds | \
    finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
      # Double-quote double-evaled strings.
      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
      ;;
    *)
      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
      ;;
    esac
  done

  cat <<__EOF__ > "${ofile}T"
#! $SHELL

# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
#
# Copyright (C) 1996-2000 Free Software Foundation, Inc.
# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.

# Sed that helps us avoid accidentally triggering echo(1) options like -n.
Xsed="sed -e s/^X//"

# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi

# ### BEGIN LIBTOOL CONFIG

# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:

# Shell to use when invoking shell scripts.
SHELL=$lt_SHELL

# Whether or not to build shared libraries.
build_libtool_libs=$enable_shared

# Whether or not to build static libraries.
build_old_libs=$enable_static

# Whether or not to add -lc for building shared libraries.
build_libtool_need_lc=$need_lc

# Whether or not to optimize for fast installation.
fast_install=$enable_fast_install

# The host system.
host_alias=$host_alias
host=$host

# An echo program that does not interpret backslashes.
echo=$lt_echo

# The archiver.
AR=$lt_AR
AR_FLAGS=$lt_AR_FLAGS

# The default C compiler.
CC=$lt_CC

# Is the compiler the GNU C compiler?
with_gcc=$GCC

# The linker used to build libraries.
LD=$lt_LD

# Whether we need hard or soft links.
LN_S=$lt_LN_S

# A BSD-compatible nm program.
NM=$lt_NM

# A symbol stripping program
STRIP=$STRIP

# Used to examine libraries when file_magic_cmd begins "file"
MAGIC_CMD=$MAGIC_CMD

# Used on cygwin: DLL creation program.
DLLTOOL="$DLLTOOL"

# Used on cygwin: object dumper.
OBJDUMP="$OBJDUMP"

# Used on cygwin: assembler.
AS="$AS"

# The name of the directory that contains temporary libtool files.
objdir=$objdir

# How to create reloadable object files.
reload_flag=$lt_reload_flag
reload_cmds=$lt_reload_cmds

# How to pass a linker flag through the compiler.
wl=$lt_wl

# Object file suffix (normally "o").
objext="$ac_objext"

# Old archive suffix (normally "a").
libext="$libext"

# Executable file suffix (normally "").
exeext="$exeext"

# Additional compiler flags for building library objects.
pic_flag=$lt_pic_flag
pic_mode=$pic_mode

# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_compiler_c_o

# Can we write directly to a .lo ?
compiler_o_lo=$lt_compiler_o_lo

# Must we lock files when doing compilation ?
need_locks=$lt_need_locks

# Do we need the lib prefix for modules?
need_lib_prefix=$need_lib_prefix

# Do we need a version for libraries?
need_version=$need_version

# Whether dlopen is supported.
dlopen_support=$enable_dlopen

# Whether dlopen of programs is supported.
dlopen_self=$enable_dlopen_self

# Whether dlopen of statically linked programs is supported.
dlopen_self_static=$enable_dlopen_self_static

# Compiler flag to prevent dynamic linking.
link_static_flag=$lt_link_static_flag

# Compiler flag to turn off builtin functions.
no_builtin_flag=$lt_no_builtin_flag

# Compiler flag to allow reflexive dlopens.
export_dynamic_flag_spec=$lt_export_dynamic_flag_spec

# Compiler flag to generate shared objects directly from archives.
whole_archive_flag_spec=$lt_whole_archive_flag_spec

# Compiler flag to generate thread-safe objects.
thread_safe_flag_spec=$lt_thread_safe_flag_spec

# Library versioning type.
version_type=$version_type

# Format of library name prefix.
libname_spec=$lt_libname_spec

# List of archive names.  First name is the real one, the rest are links.
# The last name is the one that the linker finds with -lNAME.
library_names_spec=$lt_library_names_spec

# The coded name of the library, if different from the real name.
soname_spec=$lt_soname_spec

# Commands used to build and install an old-style archive.
RANLIB=$lt_RANLIB
old_archive_cmds=$lt_old_archive_cmds
old_postinstall_cmds=$lt_old_postinstall_cmds
old_postuninstall_cmds=$lt_old_postuninstall_cmds

# Create an old-style archive from a shared archive.
old_archive_from_new_cmds=$lt_old_archive_from_new_cmds

# Create a temporary old-style archive to link instead of a shared archive.
old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds

# Commands used to build and install a shared archive.
archive_cmds=$lt_archive_cmds
archive_expsym_cmds=$lt_archive_expsym_cmds
postinstall_cmds=$lt_postinstall_cmds
postuninstall_cmds=$lt_postuninstall_cmds

# Commands to strip libraries.
old_striplib=$lt_old_striplib
striplib=$lt_striplib

# Method to check whether dependent libraries are shared objects.
deplibs_check_method=$lt_deplibs_check_method

# Command to use when deplibs_check_method == file_magic.
file_magic_cmd=$lt_file_magic_cmd

# Flag that allows shared libraries with undefined symbols to be built.
allow_undefined_flag=$lt_allow_undefined_flag

# Flag that forces no undefined symbols.
no_undefined_flag=$lt_no_undefined_flag

# Commands used to finish a libtool library installation in a directory.
finish_cmds=$lt_finish_cmds

# Same as above, but a single script fragment to be evaled but not shown.
finish_eval=$lt_finish_eval

# Take the output of nm and produce a listing of raw symbols and C names.
global_symbol_pipe=$lt_global_symbol_pipe

# Transform the output of nm in a proper C declaration
global_symbol_to_cdecl=$lt_global_symbol_to_cdecl

# Transform the output of nm in a C name address pair
global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address

# This is the shared library runtime path variable.
runpath_var=$runpath_var

# This is the shared library path variable.
shlibpath_var=$shlibpath_var

# Is shlibpath searched before the hard-coded library search path?
shlibpath_overrides_runpath=$shlibpath_overrides_runpath

# How to hardcode a shared library path into an executable.
hardcode_action=$hardcode_action

# Whether we should hardcode library paths into libraries.
hardcode_into_libs=$hardcode_into_libs

# Flag to hardcode \$libdir into a binary during linking.
# This must work even if \$libdir does not exist.
hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec

# Whether we need a single -rpath flag with a separated argument.
hardcode_libdir_separator=$lt_hardcode_libdir_separator

# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
# resulting binary.
hardcode_direct=$hardcode_direct

# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
# resulting binary.
hardcode_minus_L=$hardcode_minus_L

# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
# the resulting binary.
hardcode_shlibpath_var=$hardcode_shlibpath_var

# Variables whose values should be saved in libtool wrapper scripts and
# restored at relink time.
variables_saved_for_relink="$variables_saved_for_relink"

# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=$link_all_deplibs

# Compile-time system search path for libraries
sys_lib_search_path_spec=$lt_sys_lib_search_path_spec

# Run-time system search path for libraries
sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec

# Fix the shell variable \$srcfile for the compiler.
fix_srcfile_path="$fix_srcfile_path"

# Set to yes if exported symbols are required.
always_export_symbols=$always_export_symbols

# The commands to list exported symbols.
export_symbols_cmds=$lt_export_symbols_cmds

# The commands to extract the exported symbol list from a shared archive.
extract_expsyms_cmds=$lt_extract_expsyms_cmds

# Symbols that should not be listed in the preloaded symbols.
exclude_expsyms=$lt_exclude_expsyms

# Symbols that must always be exported.
include_expsyms=$lt_include_expsyms

# ### END LIBTOOL CONFIG

__EOF__

  case $host_os in
  aix3*)
    cat <<\EOF >> "${ofile}T"

# AIX sometimes has problems with the GCC collect2 program.  For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
if test "X${COLLECT_NAMES+set}" != Xset; then
  COLLECT_NAMES=
  export COLLECT_NAMES
fi
EOF
    ;;
  esac

  case $host_os in
  cygwin* | mingw* | pw32* | os2*)
    cat <<'EOF' >> "${ofile}T"
      # This is a source program that is used to create dlls on Windows
      # Don't remove nor modify the starting and closing comments
# /* ltdll.c starts here */
# #define WIN32_LEAN_AND_MEAN
# #include <windows.h>
# #undef WIN32_LEAN_AND_MEAN
# #include <stdio.h>
#
# #ifndef __CYGWIN__
# #  ifdef __CYGWIN32__
# #    define __CYGWIN__ __CYGWIN32__
# #  endif
# #endif
#
# #ifdef __cplusplus
# extern "C" {
# #endif
# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
# #ifdef __cplusplus
# }
# #endif
#
# #ifdef __CYGWIN__
# #include <cygwin/cygwin_dll.h>
# DECLARE_CYGWIN_DLL( DllMain );
# #endif
# HINSTANCE __hDllInstance_base;
#
# BOOL APIENTRY
# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
# {
#   __hDllInstance_base = hInst;
#   return TRUE;
# }
# /* ltdll.c ends here */
	# This is a source program that is used to create import libraries
	# on Windows for dlls which lack them. Don't remove nor modify the
	# starting and closing comments
# /* impgen.c starts here */
# /*   Copyright (C) 1999-2000 Free Software Foundation, Inc.
#
#  This file is part of GNU libtool.
#
#  This program is free software; you can redistribute it and/or modify
#  it under the terms of the GNU General Public License as published by
#  the Free Software Foundation; either version 2 of the License, or
#  (at your option) any later version.
#
#  This program is distributed in the hope that it will be useful,
#  but WITHOUT ANY WARRANTY; without even the implied warranty of
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#  GNU General Public License for more details.
#
#  You should have received a copy of the GNU General Public License
#  along with this program; if not, write to the Free Software
#  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#  */
#
# #include <stdio.h>		/* for printf() */
# #include <unistd.h>		/* for open(), lseek(), read() */
# #include <fcntl.h>		/* for O_RDONLY, O_BINARY */
# #include <string.h>		/* for strdup() */
#
# /* O_BINARY isn't required (or even defined sometimes) under Unix */
# #ifndef O_BINARY
# #define O_BINARY 0
# #endif
#
# static unsigned int
# pe_get16 (fd, offset)
#      int fd;
#      int offset;
# {
#   unsigned char b[2];
#   lseek (fd, offset, SEEK_SET);
#   read (fd, b, 2);
#   return b[0] + (b[1]<<8);
# }
#
# static unsigned int
# pe_get32 (fd, offset)
#     int fd;
#     int offset;
# {
#   unsigned char b[4];
#   lseek (fd, offset, SEEK_SET);
#   read (fd, b, 4);
#   return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
# }
#
# static unsigned int
# pe_as32 (ptr)
#      void *ptr;
# {
#   unsigned char *b = ptr;
#   return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
# }
#
# int
# main (argc, argv)
#     int argc;
#     char *argv[];
# {
#     int dll;
#     unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
#     unsigned long export_rva, export_size, nsections, secptr, expptr;
#     unsigned long name_rvas, nexp;
#     unsigned char *expdata, *erva;
#     char *filename, *dll_name;
#
#     filename = argv[1];
#
#     dll = open(filename, O_RDONLY|O_BINARY);
#     if (dll < 1)
# 	return 1;
#
#     dll_name = filename;
#
#     for (i=0; filename[i]; i++)
# 	if (filename[i] == '/' || filename[i] == '\\'  || filename[i] == ':')
# 	    dll_name = filename + i +1;
#
#     pe_header_offset = pe_get32 (dll, 0x3c);
#     opthdr_ofs = pe_header_offset + 4 + 20;
#     num_entries = pe_get32 (dll, opthdr_ofs + 92);
#
#     if (num_entries < 1) /* no exports */
# 	return 1;
#
#     export_rva = pe_get32 (dll, opthdr_ofs + 96);
#     export_size = pe_get32 (dll, opthdr_ofs + 100);
#     nsections = pe_get16 (dll, pe_header_offset + 4 +2);
#     secptr = (pe_header_offset + 4 + 20 +
# 	      pe_get16 (dll, pe_header_offset + 4 + 16));
#
#     expptr = 0;
#     for (i = 0; i < nsections; i++)
#     {
# 	char sname[8];
# 	unsigned long secptr1 = secptr + 40 * i;
# 	unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
# 	unsigned long vsize = pe_get32 (dll, secptr1 + 16);
# 	unsigned long fptr = pe_get32 (dll, secptr1 + 20);
# 	lseek(dll, secptr1, SEEK_SET);
# 	read(dll, sname, 8);
# 	if (vaddr <= export_rva && vaddr+vsize > export_rva)
# 	{
# 	    expptr = fptr + (export_rva - vaddr);
# 	    if (export_rva + export_size > vaddr + vsize)
# 		export_size = vsize - (export_rva - vaddr);
# 	    break;
# 	}
#     }
#
#     expdata = (unsigned char*)malloc(export_size);
#     lseek (dll, expptr, SEEK_SET);
#     read (dll, expdata, export_size);
#     erva = expdata - export_rva;
#
#     nexp = pe_as32 (expdata+24);
#     name_rvas = pe_as32 (expdata+32);
#
#     printf ("EXPORTS\n");
#     for (i = 0; i<nexp; i++)
#     {
# 	unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
# 	printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
#     }
#
#     return 0;
# }
# /* impgen.c ends here */

EOF
    ;;
  esac

  # We use sed instead of cat because bash on DJGPP gets confused if
  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
  # text mode, it properly converts lines to CR/LF.  This bash problem
  # is reportedly fixed, but why not run on old versions too?
  sed '$q' "$ltmain" >> "${ofile}T" || (rm -f "${ofile}T"; exit 1)

  mv -f "${ofile}T" "$ofile" || \
    (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T")
  chmod +x "$ofile"
fi





# This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"

# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'

# Prevent multiple expansion





# Make sure we can run config.sub.
if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi

echo $ac_n "checking host system type""... $ac_c" 1>&6
echo "configure:5277: checking host system type" >&5

host_alias=$host
case "$host_alias" in
NONE)
  case $nonopt in
  NONE)
    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
    fi ;;
  *) host_alias=$nonopt ;;
  esac ;;
esac

host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6



cflags_save="$CFLAGS"
ldflags_save="$LDFLAGS"
if test -z "$GCC"; then
        case $host in 
        arm-*-*)
                DEBUG="-g -D_ARM_ASSEM_" 
                CFLAGS="-O -D_ARM_ASSEM_"
                PROFILE="-p -g -O -D_ARM_ASSEM" ;;
        *)
                DEBUG="-g"
                CFLAGS="-O"
                PROFILE="-g -p" ;;
        esac
else

        case $host in 
        arm-*-*)
                DEBUG="-g -W -D__NO_MATH_INLINES -fsigned-char -D_ARM_ASSEM_"
                CFLAGS="-O2 -D_ARM_ASSEM_ -fsigned-char"
                PROFILE="-W -pg -g -O2 -D_ARM_ASSEM_ -fsigned-char -fno-inline-functions";;

        *)
                DEBUG="-g -W -D__NO_MATH_INLINES -fsigned-char"
                CFLAGS="-O2 -fsigned-char"
                PROFILE="-W -pg -g -O2 -fsigned-char -fno-inline-functions";;
        esac
fi
CFLAGS="$CFLAGS $cflags_save -D_REENTRANT"
LDFLAGS="$LDFLAGS $ldflags_save"


ac_safe=`echo "memory.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for memory.h""... $ac_c" 1>&6
echo "configure:5332: checking for memory.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 5337 "configure"
#include "confdefs.h"
#include <memory.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:5342: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  CFLAGS="$CFLAGS -DUSE_MEMORY_H"
else
  echo "$ac_t""no" 1>&6
:
fi





# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments.  Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
echo "configure:5371: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 5376 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
if { (eval echo configure:5383: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  ac_cv_header_alloca_h=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_header_alloca_h=no
fi
rm -f conftest*
fi

echo "$ac_t""$ac_cv_header_alloca_h" 1>&6
if test $ac_cv_header_alloca_h = yes; then
  cat >> confdefs.h <<\EOF
#define HAVE_ALLOCA_H 1
EOF

fi

echo $ac_n "checking for alloca""... $ac_c" 1>&6
echo "configure:5404: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 5409 "configure"
#include "confdefs.h"

#ifdef __GNUC__
# define alloca __builtin_alloca
#else
# ifdef _MSC_VER
#  include <malloc.h>
#  define alloca _alloca
# else
#  if HAVE_ALLOCA_H
#   include <alloca.h>
#  else
#   ifdef _AIX
 #pragma alloca
#   else
#    ifndef alloca /* predefined by HP cc +Olibcalls */
char *alloca ();
#    endif
#   endif
#  endif
# endif
#endif

int main() {
char *p = (char *) alloca(1);
; return 0; }
EOF
if { (eval echo configure:5437: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  ac_cv_func_alloca_works=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_func_alloca_works=no
fi
rm -f conftest*
fi

echo "$ac_t""$ac_cv_func_alloca_works" 1>&6
if test $ac_cv_func_alloca_works = yes; then
  cat >> confdefs.h <<\EOF
#define HAVE_ALLOCA 1
EOF

fi

if test $ac_cv_func_alloca_works = no; then
  # The SVR3 libPW and SVR4 libucb both contain incompatible functions
  # that cause trouble.  Some versions do not even contain alloca or
  # contain a buggy version.  If you still want to use their alloca,
  # use ar to extract alloca.o from them instead of compiling alloca.c.
  ALLOCA=alloca.${ac_objext}
  cat >> confdefs.h <<\EOF
#define C_ALLOCA 1
EOF


echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
echo "configure:5469: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 5474 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
#else
wenotbecray
#endif

EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "webecray" >/dev/null 2>&1; then
  rm -rf conftest*
  ac_cv_os_cray=yes
else
  rm -rf conftest*
  ac_cv_os_cray=no
fi
rm -f conftest*

fi

echo "$ac_t""$ac_cv_os_cray" 1>&6
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
  echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:5499: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 5504 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:5527: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  cat >> confdefs.h <<EOF
#define CRAY_STACKSEG_END $ac_func
EOF

  break
else
  echo "$ac_t""no" 1>&6
fi

done
fi

echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
echo "configure:5554: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_c_stack_direction=0
else
  cat > conftest.$ac_ext <<EOF
#line 5562 "configure"
#include "confdefs.h"
find_stack_direction ()
{
  static char *addr = 0;
  auto char dummy;
  if (addr == 0)
    {
      addr = &dummy;
      return find_stack_direction ();
    }
  else
    return (&dummy > addr) ? 1 : -1;
}
main ()
{
  exit (find_stack_direction() < 0);
}
EOF
if { (eval echo configure:5581: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_c_stack_direction=1
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_c_stack_direction=-1
fi
rm -fr conftest*
fi

fi

echo "$ac_t""$ac_cv_c_stack_direction" 1>&6
cat >> confdefs.h <<EOF
#define STACK_DIRECTION $ac_cv_c_stack_direction
EOF

fi

echo $ac_n "checking for 8-bit clean memcmp""... $ac_c" 1>&6
echo "configure:5603: checking for 8-bit clean memcmp" >&5
if eval "test \"`echo '$''{'ac_cv_func_memcmp_clean'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_func_memcmp_clean=no
else
  cat > conftest.$ac_ext <<EOF
#line 5611 "configure"
#include "confdefs.h"

main()
{
  char c0 = 0x40, c1 = 0x80, c2 = 0x81;
  exit(memcmp(&c0, &c2, 1) < 0 && memcmp(&c1, &c2, 1) < 0 ? 0 : 1);
}

EOF
if { (eval echo configure:5621: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_func_memcmp_clean=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_func_memcmp_clean=no
fi
rm -fr conftest*
fi

fi

echo "$ac_t""$ac_cv_func_memcmp_clean" 1>&6
test $ac_cv_func_memcmp_clean = no && LIBOBJS="$LIBOBJS memcmp.${ac_objext}"



LIBS="$LIBS"





trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs.  It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already.  You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
  case `(ac_space=' '; set | grep ac_space) 2>&1` in
  *ac_space=\ *)
    # `set' does not quote correctly, so add quotes (double-quote substitution
    # turns \\\\ into \\, and sed turns \\ into \).
    sed -n \
      -e "s/'/'\\\\''/g" \
      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
    ;;
  *)
    # `set' quotes correctly as required by POSIX, so do not add quotes.
    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
    ;;
  esac >> confcache
if cmp -s $cache_file confcache; then
  :
else
  if test -w $cache_file; then
    echo "updating cache $cache_file"
    cat confcache > $cache_file
  else
    echo "not updating unwritable cache $cache_file"
  fi
fi
rm -f confcache

trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15

test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'

# Any assignment to VPATH causes Sun make to only execute
# the first set of double-colon rules, so remove it if not needed.
# If there is a colon in the path, we need to keep it.
if test "x$srcdir" = x.; then
  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
fi

trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15

# Transform confdefs.h into DEFS.
# Protect against shell expansion while executing Makefile rules.
# Protect against Makefile macro expansion.
cat > conftest.defs <<\EOF
s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
s%\[%\\&%g
s%\]%\\&%g
s%\$%$$%g
EOF
DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
rm -f conftest.defs


# Without the "./", some shells look in PATH for config.status.
: ${CONFIG_STATUS=./config.status}

echo creating $CONFIG_STATUS
rm -f $CONFIG_STATUS
cat > $CONFIG_STATUS <<EOF
#! /bin/sh
# Generated automatically by configure.
# Run this file to recreate the current configuration.
# This directory was configured as follows,
# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
#
# $0 $ac_configure_args
#
# Compiler output produced by configure, useful for debugging
# configure, is in ./config.log if it exists.

ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
for ac_option
do
  case "\$ac_option" in
  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
    echo "$CONFIG_STATUS generated by autoconf version 2.13"
    exit 0 ;;
  -help | --help | --hel | --he | --h)
    echo "\$ac_cs_usage"; exit 0 ;;
  *) echo "\$ac_cs_usage"; exit 1 ;;
  esac
done

ac_given_srcdir=$srcdir
ac_given_INSTALL="$INSTALL"

trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF

# Protect against being on the right side of a sed subst in config.status.
sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
 s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
$ac_vpsub
$extrasub
s%@SHELL@%$SHELL%g
s%@CFLAGS@%$CFLAGS%g
s%@CPPFLAGS@%$CPPFLAGS%g
s%@CXXFLAGS@%$CXXFLAGS%g
s%@FFLAGS@%$FFLAGS%g
s%@DEFS@%$DEFS%g
s%@LDFLAGS@%$LDFLAGS%g
s%@LIBS@%$LIBS%g
s%@exec_prefix@%$exec_prefix%g
s%@prefix@%$prefix%g
s%@program_transform_name@%$program_transform_name%g
s%@bindir@%$bindir%g
s%@sbindir@%$sbindir%g
s%@libexecdir@%$libexecdir%g
s%@datadir@%$datadir%g
s%@sysconfdir@%$sysconfdir%g
s%@sharedstatedir@%$sharedstatedir%g
s%@localstatedir@%$localstatedir%g
s%@libdir@%$libdir%g
s%@includedir@%$includedir%g
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@PACKAGE@%$PACKAGE%g
s%@VERSION@%$VERSION%g
s%@ACLOCAL@%$ACLOCAL%g
s%@AUTOCONF@%$AUTOCONF%g
s%@AUTOMAKE@%$AUTOMAKE%g
s%@AUTOHEADER@%$AUTOHEADER%g
s%@MAKEINFO@%$MAKEINFO%g
s%@SET_MAKE@%$SET_MAKE%g
s%@V_LIB_CURRENT@%$V_LIB_CURRENT%g
s%@V_LIB_REVISION@%$V_LIB_REVISION%g
s%@V_LIB_AGE@%$V_LIB_AGE%g
s%@CC@%$CC%g
s%@CPP@%$CPP%g
s%@host@%$host%g
s%@host_alias@%$host_alias%g
s%@host_cpu@%$host_cpu%g
s%@host_vendor@%$host_vendor%g
s%@host_os@%$host_os%g
s%@build@%$build%g
s%@build_alias@%$build_alias%g
s%@build_cpu@%$build_cpu%g
s%@build_vendor@%$build_vendor%g
s%@build_os@%$build_os%g
s%@LN_S@%$LN_S%g
s%@OBJEXT@%$OBJEXT%g
s%@EXEEXT@%$EXEEXT%g
s%@ECHO@%$ECHO%g
s%@RANLIB@%$RANLIB%g
s%@STRIP@%$STRIP%g
s%@LIBTOOL@%$LIBTOOL%g
s%@ALLOCA@%$ALLOCA%g
s%@LIBOBJS@%$LIBOBJS%g
s%@DEBUG@%$DEBUG%g
s%@PROFILE@%$PROFILE%g

CEOF
EOF

cat >> $CONFIG_STATUS <<\EOF

# Split the substitutions into bite-sized pieces for seds with
# small command number limits, like on Digital OSF/1 and HP-UX.
ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
ac_file=1 # Number of current file.
ac_beg=1 # First line for current file.
ac_end=$ac_max_sed_cmds # Line after last line for current file.
ac_more_lines=:
ac_sed_cmds=""
while $ac_more_lines; do
  if test $ac_beg -gt 1; then
    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
  else
    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
  fi
  if test ! -s conftest.s$ac_file; then
    ac_more_lines=false
    rm -f conftest.s$ac_file
  else
    if test -z "$ac_sed_cmds"; then
      ac_sed_cmds="sed -f conftest.s$ac_file"
    else
      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
    fi
    ac_file=`expr $ac_file + 1`
    ac_beg=$ac_end
    ac_end=`expr $ac_end + $ac_max_sed_cmds`
  fi
done
if test -z "$ac_sed_cmds"; then
  ac_sed_cmds=cat
fi
EOF

cat >> $CONFIG_STATUS <<EOF

CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
  case "$ac_file" in
  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
  *) ac_file_in="${ac_file}.in" ;;
  esac

  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.

  # Remove last slash and all that follows it.  Not all systems have dirname.
  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
    # The file is in a subdirectory.
    test ! -d "$ac_dir" && mkdir "$ac_dir"
    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
    # A "../" for each directory in $ac_dir_suffix.
    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
  else
    ac_dir_suffix= ac_dots=
  fi

  case "$ac_given_srcdir" in
  .)  srcdir=.
      if test -z "$ac_dots"; then top_srcdir=.
      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
  *) # Relative path.
    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
    top_srcdir="$ac_dots$ac_given_srcdir" ;;
  esac

  case "$ac_given_INSTALL" in
  [/$]*) INSTALL="$ac_given_INSTALL" ;;
  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
  esac

  echo creating "$ac_file"
  rm -f "$ac_file"
  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
  case "$ac_file" in
  *Makefile*) ac_comsub="1i\\
# $configure_input" ;;
  *) ac_comsub= ;;
  esac

  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
  sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
s%@top_srcdir@%$top_srcdir%g
s%@INSTALL@%$INSTALL%g
" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
fi; done
rm -f conftest.s*

EOF
cat >> $CONFIG_STATUS <<EOF

EOF
cat >> $CONFIG_STATUS <<\EOF

exit 0
EOF
chmod +x $CONFIG_STATUS
rm -fr confdefs* $ac_clean_files
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1